Installation Material

The two-entry mounting base is available in four material variations. These are natural-colored standard polyamide 6.6, black UV-resistant polyamide 6.6, flame-retardant polyamide 6.6 and the high-quality ETFE fluoropolymer (aquamarine blue) for use in extreme conditions. It is available with a foam-coated adhesive surface made of synthetic polymer, without a self-adhesive surface for screwing or for gluing with 2-component adhesive. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested applications in cable management.
Sales unit: 100 pieces
Lieske Part No.: 452311

The Ty-Rap steel nose cable tie with integrated mounting hole is available in different versions and sizes with different mounting holes. It can be attached in one user-friendly step using screws, bolts or rivets. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 117377

The UV-resistant version of the Ty-Rap steel nose cable tie made of polyamide 12 is highly flexible even at low temperatures and can withstand mechanical stress. In addition, polyamide 12 is very resistant to acids and oils. This series is therefore suitable for applications such as outdoor installations below freezing point, in antenna construction and in the chemical industry. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold available on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The slight nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories completes the range.
Lieske Part No.: 252388

The heat-stabilized version of the Ty-Rap steel nose cable tie made of polyamide 6.6 is ideal for applications in higher temperature ranges. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 157980

The heat-stabilized version of the Ty-Rap steel nose cable tie made of polyamide 6.6 is ideal for applications in higher temperature ranges. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 104936

The heat-stabilized version of the Ty-Rap steel nose cable tie made of polyamide 6.6 is ideal for applications in higher temperature ranges. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 104937

The cable holder for ribbon cables can be adjusted in height to suit the number of cables. With this system, 1 to 25 ribbon cables can be laid easily and neatly. It is suitable for ribbon cables up to 76.2 mm wide (up to 60-pin with AWG28). The cable holder is also removable, which means that cables can be added or removed later. The holder also has a very high holding force. All versions are attached with countersunk screws or rivets, which ensures a stable attachment. Some versions also contain a self-adhesive surface for quick installation. The powerful cable holders complete the product range of our reliable premium cable ties and cover the most frequently requested application possibilities in cable management.
Sales unit: 50 pieces
Lieske Part No.: 501100

The cable holder for ribbon cables can be adjusted in height to suit the number of cables. With this system, 1 to 25 ribbon cables can be laid easily and neatly. It is suitable for ribbon cables up to 76.2 mm wide (up to 60-pin with AWG28). The cable holder is also removable, which means that cables can be added or removed later. The holder also has a very high holding force. All versions are attached with countersunk screws or rivets, which ensures a stable attachment. Some versions also contain a self-adhesive surface for quick installation. The powerful cable holders complete the product range of our reliable premium cable ties and cover the most frequently requested application possibilities in cable management.
Sales unit: 50 pieces
Lieske Part No.: 979954

The cable holder for ribbon cables can be adjusted in height to suit the number of cables. With this system, 1 to 25 ribbon cables can be laid easily and neatly. It is suitable for ribbon cables up to 76.2 mm wide (up to 60-pin with AWG28). The cable holder is also removable, which means that cables can be added or removed later. The holder also has a very high holding force. All versions are attached with countersunk screws or rivets, which ensures a stable attachment. Some versions also contain a self-adhesive surface for quick installation. The powerful cable holders complete the product range of our reliable premium cable ties and cover the most frequently requested application possibilities in cable management.
Sales unit: 50 pieces
Lieske Part No.: 543714

The Ty-Rap steel nose cable tie made of polyamide 6.6 in this series is very user-friendly due to its attractive packaging size. The packaging is in the form of work boxes, each of which contains 1000 cable ties with the head facing upwards, which enables trouble-free, quick work. The reliable steel nose cable tie is available in several lengths, different tensile strengths and colors. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The slight nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories completes the range.
Sales unit: 1000 pieces
Lieske Part No.: 646081

The Ty-Rap steel nose cable tie made of polyamide 6.6 in this series is very user-friendly due to its attractive packaging size. The packaging is in the form of work boxes, each of which contains 1000 cable ties with the head facing upwards, which enables trouble-free, quick work. The reliable steel nose cable tie is available in several lengths, different tensile strengths and colors. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The slight nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories completes the range.
Sales unit: 1000 pieces
Lieske Part No.: 537481

The spiral hose is used to protect and bundle cables. The hose provides mechanical protection for the cable insulation against abrasion and damage, while maintaining the flexibility of the cable bundle. The winding direction and cutting is anti-clockwise. The powerful and reliable spiral hose is available in both natural and black UV-resistant versions. It is delivered in practical plastic bags with Euro holes, which is ideal for retail.
Lieske Part No.: 116355

The spiral hose is used to protect and bundle cables. The hose provides mechanical protection for the cable insulation against abrasion and damage, while maintaining the flexibility of the cable bundle. The winding direction and cutting is anti-clockwise. The powerful and reliable spiral hose is available in both natural and black UV-resistant versions. It is delivered in practical plastic bags with Euro holes, which is ideal for retail.
Lieske Part No.: 711504

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 105131

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 253612

The heavy-duty Ty-Fast solid plastic cable ties are made from halogen- and silicone-free polyamide 6.6 and are available in natural and black UV-resistant versions. The natural-colored version is suitable for indoor applications, while the black UV-resistant version is suitable for many outdoor applications. The cable ties are extremely durable and therefore ideal for assemblies with high tensile strength requirements. State-of-the-art machines and raw material selection guarantee the homogeneity of the product and material throughout the entire manufacturing process. The integrated polyamide fastener enables low threading and high binding forces. In addition, the rounded, flat tie heads and the slightly angled tie end with grip surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 104939

Mounting base, cable strips, screw-on, for cable ties width up to 4.8 mm, natural colour, PA 6.6
Sales unit: 100 pieces
Lieske Part No.: 639440

Mounting base, cable strips, screw-on, for cable ties width up to 7.6 mm, natural colour, PA 6.6
Sales unit: 100 pieces
Lieske Part No.: 438567

Cable ties with steel nose closure, integrated labelling area, 360x4.8 mm, 220N, natural colour, PA 6.6
Sales unit: 1000 pieces
Lieske Part No.: 320492

Special cable ties with steel nose and integrated labeling area, 360x4.8mm, 220N, polyamide 6.6, natural, -40 degrees C to +85 degrees C, 100 pieces, plastic bag, UR approved
Sales unit: 100 pieces
Lieske Part No.: 960672

The Ty-Rap steel nose cable tie made of polyamide 6.6 in this series is very user-friendly due to its attractive packaging size. The packaging is in the form of work boxes, each of which contains 1000 cable ties with the head facing upwards, which enables trouble-free, quick work. The reliable steel nose cable tie is available in several lengths, different tensile strengths and colors. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The slight nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories completes the range.
Sales unit: 1000 pieces
Lieske Part No.: 110014

Lieske Part No.: 930625

Grounding strap FLAT GROUND STRAP/TERMINALS 1X10/M6/200, grounding strap, 10 mm², total length: 200mm, M 6, areas of application: control cabinet construction, the protective earthing measure is prescribed by standard, benefits:
Sales unit: 25 pieces
Lieske Part No.: 442188

Grounding strap FLAT GROUND STRAP/TERMINALS 1X10/M6/300, grounding strap, 10 mm², total length: 300mm, M 6, areas of application: control cabinet construction, the protective measure of protective earthing is prescribed by the standard, benefits:
Sales unit: 25 pieces
Lieske Part No.: 442190

Reduction SKINDICHT® KU PG 11/7, reduction, internal thread: PG 7, external thread: PG 11, polyamide, light grey, areas of application: cable gland made of brass with hexagonal intermediate socket, for quick assembly with the open-end wrench, benefits: high mechanical load capacity, optimal strain relief
Sales unit: 50 pieces
Lieske Part No.: 309076

Reduction SKINDICHT® KUK PG 13.5/9 REDUCER, reduction, internal thread: PG 9, external thread: PG 13.5, polyamide, light grey, areas of application: cable gland made of brass with hexagonal intermediate socket, for quick assembly with the open-end wrench, benefits: high mechanical load capacity, optimal strain relief
Sales unit: 50 pieces
Lieske Part No.: 430941

Reduction SKINDICHT® KUK PG 16/9 REDUCER, reduction, internal thread: PG 9, external thread: PG 16, polyamide, light grey, areas of application: cable gland made of brass with hexagonal intermediate socket, for quick assembly with the open-end wrench, benefits: high mechanical load capacity, optimal strain relief
Sales unit: 50 pieces
Lieske Part No.: 213421

Reduction SKINDICHT® KUK PG 16/11 REDUCER, reduction, internal thread: PG 11, external thread: PG 16, polyamide, light grey, areas of application: cable gland made of brass with hexagonal intermediate socket, for quick assembly with the open-end wrench, benefits: high mechanical load capacity, optimal strain relief
Sales unit: 50 pieces
Lieske Part No.: 430942

Reduction SKINDICHT® KU PG 21/13.5, reduction, internal thread: PG 13.5, external thread: PG 21, polyamide, light grey, areas of application: cable gland made of brass with hexagonal intermediate socket, for quick assembly with the open-end wrench, benefits: high mechanical load capacity, optimal strain relief
Sales unit: 25 pieces
Lieske Part No.: 1232178

Reduction SKINDICHT® KUS PG 11/9, reduction, internal thread: PG 9, external thread: PG 11, polyamide, light grey, areas of application: cable gland made of brass with hexagonal intermediate socket, for quick assembly with the open-end wrench, benefits: high mechanical load capacity, optimal strain relief
Sales unit: 50 pieces
Lieske Part No.: 433907

Reduction SKINDICHT® KUS PG 13.5/11, reduction, internal thread: PG 11, external thread: PG 13.5, polyamide, light grey, areas of application: cable gland made of brass with hexagonal intermediate socket, for quick assembly with the open-end wrench, benefits: high mechanical load capacity, optimal strain relief
Sales unit: 50 pieces
Lieske Part No.: 1232165

Reduction SKINDICHT® KUS PG 16/13.5, reduction, internal thread: PG 13.5, external thread: PG 16, polyamide, light grey, areas of application: cable gland made of brass with hexagonal intermediate socket, for quick assembly with the open-end wrench, benefits: high mechanical load capacity, optimal strain relief
Sales unit: 50 pieces
Lieske Part No.: 650834

Reduction SKINDICHT® KUK PG 21/16 REDUCER, reduction, internal thread: PG 16, external thread: PG 21, polyamide, light grey, areas of application: cable gland made of brass with hexagonal intermediate socket, for quick assembly with the open-end wrench, benefits: high mechanical load capacity, optimal strain relief
Sales unit: 50 pieces
Lieske Part No.: 430944

Pressure equalization element SKINDICHT® VENT 12X1.5 BK, pressure equalization element, M 12, air volume (max.): 0.8 l/min, UL recognized: No, black, polyamide, areas of application: especially for closed housings for optimal ventilation, black versions are UV-resistant and therefore well suited for outdoor use, good oil and chemical resistance, benefit: UL certification in accordance with technical data (depending on the item) enables the product to be used in North America, pressure equalization element that ensures the necessary pressure equalization in closed housings. This completely prevents the formation of moisture or condensation, for item names with the addition 'PLUS' the air flow is 3.5 l/min, for all other items 0.8 l/min
Sales unit: 25 pieces
Lieske Part No.: 1134480

Pressure equalization element SKINDICHT® VENT 12X1.5 BK PLUS, pressure equalization element, M 12, air volume (max.): 3.5 l/min, UL recognized: Yes, black, polyamide, areas of application: especially for closed housings for optimal ventilation, black versions are UV-resistant and therefore well suited for outdoor use, good oil and chemical resistance, benefit: UL certification in accordance with technical data (depending on the item) enables the product to be used in North America, pressure equalization element that ensures the necessary pressure equalization in closed housings. This completely prevents the formation of moisture or condensation, for item names with the addition 'PLUS' the air flow is 3.5 l/min, for all other items 0.8 l/min
Sales unit: 25 pieces
Lieske Part No.: 1134479

Pressure equalization element SKINDICHT® VENT 12X1.5 LGY, pressure equalization element, M 12, air volume (max.): 0.8 l/min, UL recognized: No, light gray, polyamide, areas of application: especially for closed housings for optimal ventilation, black versions are UV-resistant and therefore well suited for outdoor use, good oil and chemical resistance, benefit: UL certification in accordance with technical data (depending on the item) enables the product to be used in North America, pressure equalization element that ensures the necessary pressure equalization in closed housings. This completely prevents the formation of moisture or condensation, for item names with the addition 'PLUS' the air flow is 3.5 l/min, for all other items 0.8 l/min
Sales unit: 25 pieces
Lieske Part No.: 361090

Pressure equalization element SKINDICHT® VENT 12X1.5 LGY PLUS, pressure equalization element, M 12, air volume (max.): 3.5 l/min, UL recognized: Yes, light gray, polyamide, areas of application: especially for closed housings for optimal ventilation, black versions are UV-resistant and therefore well suited for outdoor use, good oil and chemical resistance, benefits: UL certification in accordance with technical data (depending on the item) enables the product to be used in North America, pressure equalization element that ensures the necessary pressure equalization in closed housings. This completely prevents the formation of moisture or condensation, for item names with the addition 'PLUS' the air flow is 3.5 l/min, for all other items 0.8 l/min
Sales unit: 25 pieces
Lieske Part No.: 1134478

Pressure compensation element SKINDICHT® VENT CN 12X1.5, pressure compensation element, M 12, air volume (max.): 0.4l/min, UL recognized: No, stainless steel, areas of application: control cabinet and plant construction, distribution/housing technology, weather stations, lighting technology, railway applications, benefits: pressure compensation elements guarantee trouble-free and low-maintenance operation, formation of condensation in electronic housings is prevented, ventilation system for housings
Sales unit: 10 pieces
Lieske Part No.: 1134477

Pressure compensation element SKINDICHT® VENT CN 12X1.5 PLUS, pressure compensation element, M 12, air volume (max.): 2.4 l/min, UL recognized: Yes, stainless steel, areas of application: control cabinet and plant construction, distribution/housing technology, weather stations, lighting technology, railway applications, benefits: pressure compensation elements guarantee trouble-free and low-maintenance operation, formation of condensation in electronic housings is prevented, ventilation system for housings
Sales unit: 10 pieces
Lieske Part No.: 1133728

SKINDICHT® EKU PG 9/11 extension, extension, internal thread: PG 9, external thread: PG 11, polyamide, light grey, areas of application: housing, devices, machines, benefits: support surface for open-end wrench, thus no scratching of the housing, enables the use of cable glands whose connection threads are larger than existing threaded holes, installation with open-end wrench
Sales unit: 100 pieces
Lieske Part No.: 433812

SKINDICHT® EKU PG 11/13.5 extension, internal thread: PG 11, external thread: PG 13.5, polyamide, light grey, areas of application: housing, devices, machines, benefits: support surface for open-end wrench, thus no scratching of the housing, enables the use of cable glands whose connection threads are larger than existing threaded holes, installation with open-end wrench
Sales unit: 50 pieces
Lieske Part No.: 433807

SKINDICHT® EKU PG 13.5/16 extension, internal thread: PG 13.5, external thread: PG 16, polyamide, light grey, areas of application: housing, devices, machines, benefits: support surface for open-end wrench, thus no scratching of the housing, enables the use of cable glands whose connection threads are larger than existing threaded holes, installation with open-end wrench
Sales unit: 50 pieces
Lieske Part No.: 357672

SKINDICHT® EKU PG 16/21 extension, extension, internal thread: PG 16, external thread: PG 21, polyamide, light grey, areas of application: housing, devices, machines, benefits: support surface for open-end wrench, thus no scratching of the housing, enables the use of cable glands whose connection threads are larger than existing threaded holes, installation with open-end wrench
Sales unit: 25 pieces
Lieske Part No.: 433810

SKINDICHT® EKU PG 21/29 extension, extension, internal thread: PG 21, external thread: PG 29, polyamide, light grey, areas of application: housing, devices, machines, benefits: support surface for open-end wrench, thus no scratching of the housing, enables the use of cable glands whose connection threads are larger than existing threaded holes, installation with open-end wrench
Sales unit: 25 pieces
Lieske Part No.: 1232187

Locknut SKINDICHT® GMK PG 7 RAL 7035 LGY, locknut, PG 7, wrench size: 19mm, light grey, polystyrene, halogen-free, , Areas of application: For locking SKINDICHT® cable glands in holes without thread, Benefits: Support surface for open-end wrench, thus no scratching of the housing
Sales unit: 100 pieces
Lieske Part No.: 433825

Locknut SKINDICHT® GMK PG 9 RAL 7035 LGY, locknut, PG 9, wrench size: 22mm, light grey, polystyrene, halogen-free, , Areas of application: For locking SKINDICHT® cable glands in holes without thread, Benefit: Support surface for open-end wrench, thus no scratching of the housing
Sales unit: 100 pieces
Lieske Part No.: 115369

Locknut SKINDICHT® GMK PG 11 RAL 7035 LGY, locknut, PG 11, wrench size: 24mm, light grey, polystyrene, halogen-free, , Areas of application: For locking SKINDICHT® cable glands in holes without thread, Benefit: Support surface for open-end wrench, thus no scratching of the housing
Sales unit: 100 pieces
Lieske Part No.: 433816

Locknut SKINDICHT® GMK PG 13.5 RAL 7035 LGY, locknut, PG 13.5, wrench size: 27mm, light grey, polystyrene, halogen-free, , Areas of application: For locking SKINDICHT® cable glands in holes without thread, Benefit: Support surface for open-end wrench, thus no scratching of the housing
Sales unit: 100 pieces
Lieske Part No.: 433820

Locknut SKINDICHT® GMK PG 16 RAL 7035 LGY, Locknut, PG 16, Wrench size: 30mm, light grey, Polystyrene, Halogen-free, , Areas of application: For locking SKINDICHT® cable glands in holes without thread, Benefit: Support surface for open-end wrench, thus no scratching of the housing
Sales unit: 100 pieces
Lieske Part No.: 433822

Locknut SKINDICHT® GMK PG 21 RAL 7035 LGY, Locknut, PG 21, Wrench size: 36mm, light grey, Polystyrene, Halogen-free, , Areas of application: For locking SKINDICHT® cable glands in holes without thread, Benefit: Support surface for open-end wrench, thus no scratching of the housing
Sales unit: 50 pieces
Lieske Part No.: 459465