Cable duct accessories complete in Wiring systems
Cable duct accessories complete from Ggk
 |
Ggk 18052 Ranger / RK trunking , 1-field 300 mm alpine white
PVC marshalling duct cover for protection and as a transition from laid cables to distribution cabinets, set consisting of a cover profile, two profile holders with magnets for screwless installation ... Lieske Part No.: 839614 Mfg Part No: 18052 Type: RK110x150-300 |
49,22 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
GGK RK 110x150-550 alpine white cable routing channel 2-field 18056
PVC marshalling duct cover for protection and as a transition from laid cables to distribution cabinets, set consisting of a cover profile, two profile holders with magnets for screwless installation ... Lieske Part No.: 620039 Mfg Part No: 18056 Type: RK110x150-550 |
52,65 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Ggk 18058 Ranger / RK 3-field = 800 mm, light gray
PVC marshalling duct cover for protection and as a transition from laid cables to distribution cabinets, set consisting of a cover profile, two profile holders with magnets for screwless installation ... Lieske Part No.: 606451 Mfg Part No: 18058 Type: RK110x150-800 |
59,63 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
GGK RK 110x150-800 alpine white cable routing trunking 3-field 18060
PVC marshalling duct cover for protection and as a transition from laid cables to distribution cabinets, set consisting of a cover profile, two profile holders with magnets for screwless installation ... Lieske Part No.: 415671 Mfg Part No: 18060 Type: RK110x150-800 |
59,63 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Ggk 18064 Ranger / RK trunking , 4-field 1050 mm alpine white
PVC marshalling duct cover for protection and as a transition from laid cables to distribution cabinets, set consisting of a cover profile, two profile holders with magnets for screwless installation ... Lieske Part No.: 805572 Mfg Part No: 18064 Type: RK110x150-1.050 |
68,01 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18068 Ranger / RK trunking , 5-field 1300 mm alpine white
PVC marshalling duct cover for protection and as a transition from laid cables to distribution cabinets, set consisting of a cover profile, two profile holders with magnets for screwless installation ... Lieske Part No.: 742987 Mfg Part No: 18068 Type: RK110x150-1.300 |
83,68 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
GGK RK 110x150-2,000 Cover shunting lamination light gray 18070
PVC marshalling duct cover, for protection and as a transition from laid cables to distribution cabinets, can be shortened to any size. The profile holder and the pair of end pieces must be ordered ... Lieske Part No.: 612473 Mfg Part No: 18070 Type: RK110x150-2.000 |
48,51 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
GGK Ranger/RK cover profile 18072 110x150 L=2000 mm alpine white
PVC marshalling duct cover, for protection and as a transition from laid cables to distribution cabinets, can be shortened to any size. The profile holder and the pair of end pieces must be ordered ... Lieske Part No.: 474261 Mfg Part No: 18072 Type: RK110x150-2.000 |
48,51 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18080 RK endcaps 100x150 pair right / left, alpine white f.Rangierkanalabdeckung
End pieces for shunting duct cover, attachable to the cover profile to cover the open sides on the left and right. Lieske Part No.: 880920 Mfg Part No: 18080 Type: RK-Endkappen100x150 |
16,23 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18084 Ranger / RK 1 profile holder + 1 M, alpine white
Profile holder for marshalling duct cover, with a magnet for easy and screwless mounting on the distribution cabinet, screwing is of course also possible on request. Lieske Part No.: 729291 Mfg Part No: 18084 Type: RK-Profilkonsole100x |
18,26 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18086 Ranger / RK profile bracket, alpine white
Profile holder for marshalling duct cover, with fastening points for screwing onto the distribution cabinet. Lieske Part No.: 677585 Mfg Part No: 18086 Type: RK-Profilkonsole100x |
8,44 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18200 BRS3 ground wire with one potential equalization terminal
Parapet duct lower part made of aluminum in accordance with DIN EN 50085-2-1 for laying cables directly on the wall or on wall brackets, for an internal 45 mm upper part for installing compact M45 ... Lieske Part No.: 743186 Mfg Part No: 18200 Type: Mikro-BRA-UT62x62/45 |
387,59 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 1823 LFG-ES 30x30 stone gray tail, f.Leitungsführungskanal
End piece as a molded part for cable routing ducts, for a clean finish and to cover open ends of the cable routing ducts. Lieske Part No.: 921652 Mfg Part No: 1823 Type: LFG/EST30X30GR |
4,65 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18302 External corner for wall duct, BR3 AEV (joint) 60x130/80, 7035, + / -10 °
Outside corner as a molded part for parapet duct, angle adjustable with an adjustment range of +/- 10°, for laying cables around wall projections. Lieske Part No.: 782895 Mfg Part No: 18302 Type: BR3-AEV60x130/80 |
39,64 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18303 Inner corner for wall duct, BR3-IEV (joint) 60x130 / 80, 7035, +/- 10 °
Internal corner as a molded part for parapet duct, angle adjustable with an adjustment range of +/- 10°, for bypassing corners in rooms. Note: When installing the parapet duct lower parts, a minimum ... Lieske Part No.: 254862 Mfg Part No: 18303 Type: BR3-IEV60x130/80 |
39,13 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18308 Outer corner for wall duct, BRA3-AEV (joint) 60x130 / 80
Outside corner as a molded part for parapet duct, angle adjustable with an adjustment range of +/- 10°, for laying cables around wall projections. Lieske Part No.: 122119 Mfg Part No: 18308 Type: BRA3-AEV60x130/80 |
75,68 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18309 Inner corner for wall duct, BRA3-IEV (joint) 60x130 / 80
Internal corner as a molded part for parapet duct, angle adjustable with an adjustment range of +/- 10°, for bypassing corners in rooms. Note: When installing the parapet duct lower parts, a minimum ... Lieske Part No.: 308783 Mfg Part No: 18309 Type: BRA3-IEV60x130/80 |
70,65 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18340 BR # 54 # 60x130 flat angle, light gray
Flat angle, made from the base profile of the PVC parapet duct, for laying cables with a 90° change of direction on the wall, leg length: 200 mm. Lieske Part No.: 191385 Mfg Part No: 18340 Type: BR3-FW60x130/80 |
39,64 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18355 Outer corner for wall duct, BR3-AEV (joint) 60x170 / 80, 7035, +/- 10 °
Outside corner as a molded part for parapet duct, angle adjustable with an adjustment range of +/- 10°, for laying cables around wall projections. Lieske Part No.: 817153 Mfg Part No: 18355 Type: BR3-AEV60x170/80 |
54,47 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18356 Outer corner for wall duct, BR3-AEV (joint) 60x170 / 80, 9010, +/- 10 °
Outside corner as a molded part for parapet duct, angle adjustable with an adjustment range of +/- 10°, for laying cables around wall projections. Lieske Part No.: 200128 Mfg Part No: 18356 Type: BR3-AEV60x170/80 |
54,47 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18362 BR3-IEV joint 60x130 / 80 +/- 10 °, 2-piece internal corner cremeweiss
Internal corner as a molded part for parapet duct, angle adjustable with an adjustment range of +/- 10°, for bypassing corners in rooms. Note: When installing the parapet duct lower parts, a minimum ... Lieske Part No.: 947201 Mfg Part No: 18362 Type: BR3-IEV60x130/80 |
39,13 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18363 Inner corner for wall duct, BR3-IEV (joint) 60x170 / 80, 7035, +/- 10 °
Internal corner as a molded part for parapet duct, angle adjustable with an adjustment range of +/- 10°, for bypassing corners in rooms. Note: When installing the parapet duct lower parts, a minimum ... Lieske Part No.: 552327 Mfg Part No: 18363 Type: BR3-IEV60x170/80 |
49,52 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Ggk 18369 Inneneck BR 60x110/80-9001, PVC, Gehrungsformteil, cremeweiß
Inneneck 90°, aus dem Grundprofil des Brüstungskanal-Unterteils aus PVC, zur Eckumfahrung in Räumen, Schenkellänge: 180 mm. Verkaufseinheit: 1 ST. Lieske Part No.: 507503 Mfg Part No: 18369 Type: BR 60x110/80-IE |
32,26 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Ggk 18372 Außeneck BR 60x110/80-9001, PVC, Gehrungsformteil, cremeweiß
Außeneck 90°, aus dem Grundprofil des Brüstungskanal aus PVC, zur Leitungsverlegung um Mauervorsprünge, Schenkellänge: 180 mm. Verkaufseinheit: 1 ST. Lieske Part No.: 507493 Mfg Part No: 18372 Type: BR 60x110/80-AE |
32,76 EUR
plus delivery charges
Delivery time on requestinfo_outline
|