Cable duct accessories complete in Wiring systems
Cable duct accessories complete from Ggk
 |
Ggk 12867 BRS3-IE 80x200 Moulded hood, alpine white Internal corner
Internal corner as cut-concealing hood molding for parapet duct made of sheet steel, for corner bypassing in rooms, with pre-assembled upper part sections for plugging into the lower part profiles, ... Lieske Part No.: 946135 Mfg Part No: 12867 Type: BRS3-IE80x200 |
121,32 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 12869 BRS3-AE 80x200 Moulded hood, alpine white External corner
Outside corner as cut-concealing hood molding for parapet duct made of sheet steel, for laying cables around wall projections, with pre-assembled upper part sections for plugging into the lower part ... Lieske Part No.: 946480 Mfg Part No: 12869 Type: BRS3-AE80x200 |
121,32 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 1287 LFG LFG-Outer corner / AE40X40BR, 40x40mm BROWN
Outside corner as hood molding for cable routing duct, for laying cables around wall projections. Lieske Part No.: 257625 Mfg Part No: 1287 Type: LFG/AE40X40BR |
9,88 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 1290 LFG-FW 40x40 Sepia, Low Angle f.Kanal
Flat angle as hood molding for cable routing duct, for cable laying with a 90° change of direction. Lieske Part No.: 963367 Mfg Part No: 1290 Type: LFG/FLW40X40BR |
10,20 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 12900 BRS3-ES 80x200 / 3 3-s. cross, alpine white tail
End piece as a molded part for parapet duct made of sheet steel, for a clean finish and to cover open ends of the parapet ducts, spanning 3 sides for a parapet duct mounted on the wall. Lieske Part No.: 946384 Mfg Part No: 12900 Type: BRS3-ES80x200/3 |
32,59 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 1291 LFG LFG PLATE / EST40X40BR, 40x40mm BROWN
End piece as a molded part for cable routing ducts, for covering open ends of the cable routing ducts, is held by clamping to the cable routing duct. Lieske Part No.: 523550 Mfg Part No: 1291 Type: LFG/EST40X40BR |
5,72 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 1295 FB-ES 60x230 steingrau end piece,
End piece as a molded part for cable routing ducts, for covering open ends of the cable routing ducts, is held by clamping to the cable routing duct. Lieske Part No.: 968010 Mfg Part No: 1295 Type: FB/EST60X230GR |
10,71 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 1307 end plate gray 100x230 FB/EST100x230GR
End piece as a molded part for cable routing ducts, for covering open ends of the cable routing ducts, is held by clamping to the cable routing duct. Lieske Part No.: 264010 Mfg Part No: 1307 Type: FB-ES100x230 |
18,53 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 1333 FB-OT 150 alpinweiss Trunking 1, FB-OT 150 alpine white
Upper part for cable duct made of PVC according to DIN EN 50085-2-1, to be snapped onto the lower part, can be used for FB 60x150 and LFG 80x150. Lieske Part No.: 427571 Mfg Part No: 1333 Type: FB-OT 150 alpinweiss |
37,28 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 13386 AMBIENCE / SL / D-AE 20x70, BEECH,
Inner corner for skirting board channel, for corner bypass in interior rooms, as a hood molding conceals the two cut edges of the skirting board upper parts, can be attached using molded-on locking ... Lieske Part No.: 466818 Mfg Part No: 13386 Type: SL/d-IE20x70 |
7,14 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 13449 LFG Tee LFGT25X40AW, 25x40mm alpinweiss
T-piece as hood molding for cable duct, for cable laying with a 90° branch. Lieske Part No.: 106097 Mfg Part No: 13449 Type: LFGT25X40AW |
8,09 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 1381 device installation trunking Top, FB-OT 110, 9010 for LFG 40x110
Upper part for cable duct made of PVC according to DIN EN 50085-2-1, to be snapped onto the lower part, can be used for FB 60x110 and LFG 40x110. Lieske Part No.: 559176 Mfg Part No: 1381 Type: FB-OT110 |
27,84 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 13885 AMBIENCE / SL / D IN 20X50, BEECH,
Inner corner for skirting board channel, for corner bypass in interior rooms, as a hood molding conceals the two cut edges of the skirting board upper parts, can be attached using molded-on locking ... Lieske Part No.: 737665 Mfg Part No: 13885 Type: SL/d-IE20x50 |
6,82 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 13887 AMBIENCE / SL / D EST 20X50, LEFT,
End piece as a molded part for skirting board channel, for a clean finish, with molded locking hooks for attaching to the open end of the skirting board channel on the left side. Lieske Part No.: 227905 Mfg Part No: 13887 Type: SL/d-ES20x50 |
6,82 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 13888 AMBIENCE / SL / D EST 20X50, LAW,
End piece as a molded part for skirting board channel, for a clean finish, with molded locking hooks for attaching to the open end of the skirting board channel on the right-hand side. Lieske Part No.: 551632 Mfg Part No: 13888 Type: SL/d-ES20x50 |
6,82 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
GGK 14091 Door bypass angle TUW L+R for SL/c 20x50 Alpine white RAL9010
Flat angle for skirting board duct, for a 90° exit from the skirting board to the cable routing duct Mini 15x50L, covers the transition from the two upper parts (SL and Mini) as an overlapping hood ... Lieske Part No.: 1334622 Mfg Part No: 14091 |
9,57 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 14096 Türumfahrungswinkel TUW L+R f. SL/c 20x70 Alpinweiß RAL9010
Flachwinkel für Sockelleistenkanal, für einen 90°-Abgang von der Sockelleiste auf den Leitungsführungskanal Mini 15x50L, deckt als überlappendes Haubenformteil den Übergang von den beiden ... Lieske Part No.: 516330 Mfg Part No: 14096 Type: SL 20x70-TUW |
10,54 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 14106 BRFW65X200 / 80 BR-FLW 65X200 / 80, ALPI,
OFFICE / BR Brüstungskanal- wall and column systems of hard PVC Rigid PVC colored, flame retardant, UV-stabilized (Windows Quality) and normal impact Packaging trunking base with 2-row ... Lieske Part No.: 291627 Mfg Part No: 14106 Type: BRFW65X200/80 |
86,37 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 14212 SYSTEM 1 SYSTEMZUBEHOER, SOUND BARRIER MINER
Sound barrier as a mineral fiber strand with a diameter of 20 mm for self-cutting. Insulates around 40 dB and should always be used where systems run through the wall and sound transmission should be ... Lieske Part No.: 618502 Mfg Part No: 14212 Type: SchallbarriereMinera |
590,53 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 14268 BR end plate alpine white 65x100, 65x100 BR EST
OFFICE / BR cable duct wall and pole systems made of rigid PVC Rigid PVC solid-colored, flame-retardant, UV stabilized (Windows Quality) and normal impact Packaging channel base with 2-row ... Lieske Part No.: 476147 Mfg Part No: 14268 Type: BR-EST 65X100 ALPIN |
10,34 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 14340 Kabelbändiger 60x70 set, 1400mm light gray RAL 7035
Cable tie made of PVC, prevents cable loops or tripping hazards at desks and office workstations, consisting of a profile with double-sided adhesive tape as an assembly aid and a pair of attachable ... Lieske Part No.: 741724 Mfg Part No: 14340 |
132,62 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
GGK 14355 cable bander KB 60x70 light gray RAL7035 L=2000mm
Cable tie made of PVC, prevents cable loops or tripping hazards at desks and office workstations, profile with double-sided adhesive tape as an assembly aid, can be shortened to any size. The end ... Lieske Part No.: 1323178 Mfg Part No: 14355 Type: KB60x70 |
37,70 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 14358 OFFICE / Kabelbändiger 60x70 anthrazi, anthracite L = 2000 mm
Cable tie made of PVC, prevents cable loops or tripping hazards at desks and office workstations, profile with double-sided adhesive tape as an assembly aid, can be shortened to any size. The end ... Lieske Part No.: 284213 Mfg Part No: 14358 Type: KB60x70 |
18,85 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
GGK 14528 Inner corner IE for MINI 10x30 Alpine white RAL9010
Internal corner as hood molding for cable routing duct, for bypassing corners in rooms. Lieske Part No.: 1429672 Mfg Part No: 14528 Type: MINI-IE10x30alpinweiß |
3,09 EUR
plus delivery charges
Delivery time on requestinfo_outline
|