Cable duct accessories complete in Wiring systems

Cable duct accessories complete from Ggk

Ggk 24014 Tail for wall duct, BRS3-ES re / li 120x120 desk / S End piece as a molded part for parapet duct made of sheet steel, for a clean finish and to cover open ends of the parapet ducts, spanning 3 sides for a parapet duct mounted on the wall.

Lieske Part No.: 401557
Mfg Part No: 24014
Type: BRS3-ESre/li120x120P

30,12 EUR

≈ £25.75 | ≈ $34.85

Delivery time on request

GGK 24187 Equipment carrier GT for SL-Box 70/45 empty GT for SL 20x70 Alpine white RAL9010 Device carrier for the skirting board duct SL 20x70, for the installation of a compact M45 built-in device in the format 45x45 mm, device carrier lower part with four fastening points for screwing ...

Lieske Part No.: 1334761
Mfg Part No: 24187

22,84 EUR

≈ £19.53 | ≈ $26.43

Delivery time on request

GGK 24188 Equipment carrier GT for SL-Box 50/45 empty GT for SL 20x50 Alpine white RAL9010 Device carrier for the skirting board duct SL 20x50, for the installation of a compact M45 built-in device in the format 45x45 mm, device carrier lower part with four fastening points for screwing ...

Lieske Part No.: 1326112
Mfg Part No: 24188
Type: SL-Box50/45alpinweiß

22,78 EUR

≈ £19.48 | ≈ $26.36

Delivery time on request

Ggk 2743 Inneneckhaube LFS 40x40, Stahl, verzinkt Inneneck als Haubenformteil zu Leitungsführungskanal, zur Eckumfahrung in Räumen. Verkaufseinheit: 1 ST.

Lieske Part No.: 491177
Mfg Part No: 2743
Type: LFS 40x40-IE

39,04 EUR

≈ £33.38 | ≈ $45.17

Delivery time on request

Ggk 2744 LFS AE 40x40 galvanized Outer corner, f.Leitungsführungskanal Outside corner as hood molding for cable routing duct, for laying cables around wall projections.

Lieske Part No.: 958775
Mfg Part No: 2744
Type: LFS/AE40X40VZ

39,04 EUR

≈ £33.38 | ≈ $45.17

Delivery time on request

Ggk 2745 LFS-flat angle LFS / FLW40X40VZ, 40x40mm galvanized Flat angle as hood molding for cable routing duct, for cable laying with a 90° change of direction.

Lieske Part No.: 244315
Mfg Part No: 2745
Type: LFS/FLW40X40VZ

39,04 EUR

≈ £33.38 | ≈ $45.17

Delivery time on request

Ggk 2746 LFS ES 40x40 galvanized tail f.Leitungsführungskanal End piece as a molded part for cable routing ducts, for covering open ends of the cable routing ducts, is held by clamping to the cable routing duct.

Lieske Part No.: 879486
Mfg Part No: 2746
Type: LFS/EST40X40VZ

12,16 EUR

≈ £10.40 | ≈ $14.07

Delivery time on request

Ggk 2749 LFS-internal corner LFS / IE40X40RW, 40x40mm coated pure white Internal corner as hood molding for cable routing duct, for bypassing corners in rooms.

Lieske Part No.: 140432
Mfg Part No: 2749
Type: LFS/IE40X40RW

49,18 EUR

≈ £42.05 | ≈ $56.90

Delivery time on request

Ggk 2750 LFS AE 40x40 alpine white outer corner, f.Leitungsführungskanal Outside corner as hood molding for cable routing duct, for laying cables around wall projections.

Lieske Part No.: 921262
Mfg Part No: 2750
Type: LFS/AE40X40RW

49,18 EUR

≈ £42.05 | ≈ $56.90

Delivery time on request

GGK 2751 flat angle FW for LFS 40x40 alpine white RAL9010 Flat angle as hood molding for cable routing duct, for cable laying with a 90° change of direction.

Lieske Part No.: 1315043
Mfg Part No: 2751
Type: LFS-FW40x40alpinwei

49,18 EUR

≈ £42.05 | ≈ $56.90

Delivery time on request

Ggk 2752 LFS LFS/EST40x40RW end plate, 40x40mm coated in pure white End piece as a molded part for cable routing ducts, for covering open ends of the cable routing ducts, is held by clamping to the cable routing duct.

Lieske Part No.: 578567
Mfg Part No: 2752
Type: LFS/EST40X40RW

16,34 EUR

≈ £13.97 | ≈ $18.91

Delivery time on request

Ggk 2830 Cable trunking, Miniclip 5x9 m. Hinge-shell PVC cable routing duct for laying cables on walls and ceilings, consisting of a lower part with double-sided adhesive tape for fastening and a film hinge upper part.
Note: For long-term use, we ...

Lieske Part No.: 163348
Mfg Part No: 2830
Type: MINIclip5x9

-94% 6,93 EUR 123,60 EUR

≈ £5.93 | ≈ $8.02

Delivery time on request

Ggk 2915 Joint connector for, device installation trunking UPS 60 Potenzialausgle Earthing and coupling accessories for the BRS parapet duct bases made of sheet steel with a height of 60 mm.

Lieske Part No.: 213910
Mfg Part No: 2915
Type: USV-60-PA-Kupl

4,60 EUR

≈ £3.93 | ≈ $5.32

Delivery time on request

Ggk 2925 joint connector, for wall duct KVK 80 Steel coupling as an assembly aid and for the mechanical connection of two parapet duct base sections, with a spring mechanism for locking.

Lieske Part No.: 635507
Mfg Part No: 2925
Type: KVK80

3,28 EUR

≈ £2.80 | ≈ $3.79

Delivery time on request

Ggk 2926 Joint connector for, device installation trunking UPS 50 Potenzialausgle Earthing and coupling accessories for the MBRS 80x80/45 parapet duct bases made of sheet steel.

Lieske Part No.: 164504
Mfg Part No: 2926
Type: USV-50-PA-Kupl.

2,69 EUR

≈ £2.30 | ≈ $3.11

Delivery time on request

Ggk 2945 joint connector, for wall duct KVK 60 Steel coupling as an assembly aid and for the mechanical connection of two parapet duct base sections, with a spring mechanism for locking.

Lieske Part No.: 348347
Mfg Part No: 2945
Type: KVK60

2,93 EUR

≈ £2.51 | ≈ $3.39

Delivery time on request

Ggk 2947 UPS 80 made of spring steel, 80 mm, Earthing and coupling accessories for the BRS parapet duct bases made of sheet steel with a height of 80 mm.

Lieske Part No.: 761197
Mfg Part No: 2947
Type: USV-80-PA-Kupl

5,72 EUR

≈ £4.89 | ≈ $6.62

Delivery time on request

Ggk 2950 CHD cable clamps CHD / S60, for LFS60x60 Cable retaining clip for cable duct made of sheet steel, can be snapped into the lower part of the cable duct, can be moved freely.

Lieske Part No.: 395155
Mfg Part No: 2950
Type: LFS-KHK60

5,32 EUR

≈ £4.55 | ≈ $6.16

Delivery time on request

Ggk 2951 CHD cable clamps CHD / S100, for LFS60x100 / FBS60x100 Cable retaining clip for cable duct made of sheet steel, can be snapped into the lower part of the cable duct, can be moved freely.

Lieske Part No.: 618823
Mfg Part No: 2951
Type: LFS/FBS-KHK100

5,47 EUR

≈ £4.68 | ≈ $6.33

Delivery time on request

GGK 2959 Universal joint connector USV60 DOMUS/LFS+FBS spring steel Earthing and coupling accessories for the LFS cable duct bases and MBRS parapet duct bases made of sheet steel with a height of 60 mm.

Lieske Part No.: 1427309
Mfg Part No: 2959
Type: USV60

4,44 EUR

≈ £3.80 | ≈ $5.14

Delivery time on request

GGK connecting pin for BRA lower parts joint connector 3001 Clamping sleeve as an assembly aid and for easy connection of two parapet duct base sections MBRA 60x90/45, diameter: 5 mm, length: 12 mm.

Lieske Part No.: 637112
Mfg Part No: 3001
Type: Verbindungsstift-BRA

6,93 EUR

≈ £5.93 | ≈ $8.02

Delivery time on request

GGK KSE 50/DIALOG 3f Schuko socket with description field plug connector. alpine white 31280 Triple channel socket including installation box, cable connection via plug-in terminals, 2-pole, 16 A/250 V~, with connection terminals according to VDE 0620, suitable for 3 angle or surface plugs, ...

Lieske Part No.: 479093
Mfg Part No: 31280
Type: KSE50/DIALOG

63,67 EUR

≈ £54.44 | ≈ $73.67

Delivery time on request

Ggk 3203 with DIN rail mounting bracket 50, Mounting bracket for easy-to-install and space-saving installation of the junction boxes to comply with the bending radii required for copper and fiber optic data cables, for separation from mains ...

Lieske Part No.: 306527
Mfg Part No: 3203
Type: Montagehalter50

10,52 EUR

≈ £8.99 | ≈ $12.17

Delivery time on request

Ggk 3581 wall bracket WCF 47-62 mm 1 , Wall bracket as an accessory for fastening a parapet duct (series: BR, BRA, BRS) or cable duct (series: FB), for an adjustable wall distance of 45-60 mm, with screw set M8x16 for fixing the adjustment ...

Lieske Part No.: 150668
Mfg Part No: 3581
Type: WKV-1Wandkonsole,40-

-86% 19,58 EUR 139,32 EUR

≈ £16.74 | ≈ $22.65

Delivery time on request

1 2 3 5 7 8 9 10 11 12 13 14 15 16 17 18 20 22 .. 40 .. 60 .. 80 .. 100 .. 120 .. 140 .. 160 .. 180 .. 192