Cable duct accessories complete in Wiring systems
Cable duct accessories complete from Ggk
 |
GGK 12570 Mini 10x10 Mini- LFK mit Schaumklebeband 9010 50m
Leitungsführungskanal aus PVC nach DIN EN 50085-2-1 zur Leitungsverlegung an Wand und Decke, bestehend aus komplett übergreifendem Oberteil und Unterteil mit doppelseitigem Schaumklebeband zur ... Lieske Part No.: 900995 Mfg Part No: 12570 Type: Mini 10x10 |
7,31 EUR
 ≈ £6.25 | ≈ $8.45
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
 |
Ggk 1260 FB LFG partition 60 mm
Dividers for LFG channels Of snap-separator for multiple allocation for all LFG installation ducts. Standard length: 2 m, special lengths up to 7.5 m Model: 1-way Height: 60 mm Type: ... Lieske Part No.: 260056 Mfg Part No: 1260 Type: TS60Trennwand |
10,55 EUR
≈ £9.02 | ≈ $12.21
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
 |
Ggk 12602 OFFICE / BRS3-IE 80x170, galvanized,
Internal corner as cut-concealing hood molding for parapet duct made of sheet steel, for corner bypassing in rooms, with pre-assembled upper part sections for plugging into the lower part profiles, ... Lieske Part No.: 725170 Mfg Part No: 12602 Type: BRS3-IE80x170 |
64,08 EUR
≈ £54.79 | ≈ $74.14
Delivery time on requestinfo_outline
|
 |
Ggk 12603 OFFICE / BRS3-IE 80x170, Alpine,
Internal corner as cut-concealing hood molding for parapet duct made of aluminum and sheet steel, for corner bypassing in rooms, with pre-assembled upper part sections for plugging into the lower part ... Lieske Part No.: 826559 Mfg Part No: 12603 Type: BRS3-IE80x170 |
113,50 EUR
≈ £97.04 | ≈ $131.32
Delivery time on requestinfo_outline
|
 |
Ggk 12604 OFFICE / BRS3-AE 80x170, galvanized,
Outside corner as cut-concealing hood molding for parapet duct made of sheet steel, for laying cables around wall projections, with pre-assembled upper part sections for plugging into the lower part ... Lieske Part No.: 536532 Mfg Part No: 12604 Type: BRS3-AE80x170 |
64,08 EUR
≈ £54.79 | ≈ $74.14
Delivery time on requestinfo_outline
|
 |
Ggk 12605 OFFICE / BRS3-AE 80x170, Alpine,
Outside corner as cut-concealing hood molding for parapet duct made of aluminum and sheet steel, for laying cables around wall projections, with pre-assembled upper part sections for plugging into the ... Lieske Part No.: 409205 Mfg Part No: 12605 Type: BRS3-AE80x170 |
113,50 EUR
≈ £97.04 | ≈ $131.32
Delivery time on requestinfo_outline
|
 |
GGK 12606 End piece ES for BRS 80x170/3 galvanized across 3 sides
End piece as a molded part for parapet duct made of sheet steel, for a clean finish and to cover open ends of the parapet ducts, spanning 3 sides for a parapet duct mounted on the wall. Lieske Part No.: 1324544 Mfg Part No: 12606 Type: BRS3-ES80x170/3verzinkt |
20,52 EUR
≈ £17.54 | ≈ $23.74
Delivery time on requestinfo_outline
|
 |
Ggk 12607 OFFICE / BRS3-ES 80x170, Alpine,
End piece as a molded part for parapet duct made of sheet steel, for a clean finish and to cover open ends of the parapet ducts, spanning 3 sides for a parapet duct mounted on the wall. Lieske Part No.: 470743 Mfg Part No: 12607 Type: BRS3-ES80x170/3 |
29,70 EUR
≈ £25.39 | ≈ $34.36
Delivery time on requestinfo_outline
|
 |
Ggk 12608 OFFICE / BRS3-FW 80x170, galvanized,
Flat angle as cut-concealing hood molding for parapet duct made of sheet steel, for cable laying with a 90° change of direction on the wall, leg length: 225 mm. Lieske Part No.: 184732 Mfg Part No: 12608 Type: BRS3-FW80x170 |
64,08 EUR
≈ £54.79 | ≈ $74.14
Delivery time on requestinfo_outline
|
 |
Ggk 12609 OFFICE / BRS3-FW 80x170, Alpine,
Flat angle as cut-concealing hood molding for parapet duct made of aluminum and sheet steel, for cable laying with a 90° change of direction on the wall, leg length: 225 mm. Lieske Part No.: 534144 Mfg Part No: 12609 Type: BRS3-FW80x170 |
113,50 EUR
≈ £97.04 | ≈ $131.32
Delivery time on requestinfo_outline
|
 |
Channel 50 GGK box GED 1261,
Accessory mounting boxes Accessory mounting box 1-way Type: CAN GED 50 Quantity: 1 unit. Lieske Part No.: 475805 Mfg Part No: 1261 Type: GED50 |
6,30 EUR
≈ £5.39 | ≈ $7.29
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
 |
Channel 50 GGK socket GDS 1268
Accessory mounting boxes of quick mounting box -fold Type: BOX GDS 5 item: ST. Lieske Part No.: 752346 Mfg Part No: 1268 Type: GDS |
3,30 EUR
≈ £2.82 | ≈ $3.82
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
 |
Ggk 1271 LFG LFG PLATE / EST40X40GR, 40x40mm GREY
End piece as a molded part for cable routing ducts, for covering open ends of the cable routing ducts, is held by clamping to the cable routing duct. Lieske Part No.: 308365 Mfg Part No: 1271 Type: LFG/EST40X40GR |
5,28 EUR
≈ £4.51 | ≈ $6.11
Delivery time on requestinfo_outline
|
 |
Ggk 12721 Inner 60x110mm to BR light gray,
90° internal corner, made from the base profile of the parapet duct lower section made of PVC, for corner bypassing in rooms, leg length: 180 mm. Lieske Part No.: 133001 Mfg Part No: 12721 Type: BR3-IE60x110 |
33,23 EUR
≈ £28.41 | ≈ $38.45
Delivery time on requestinfo_outline
|
 |
Ggk 12722 inner corner to 60x110mm alpine white,
90° internal corner, made from the base profile of the parapet duct lower section made of PVC, for corner bypassing in rooms, leg length: 180 mm. Lieske Part No.: 505883 Mfg Part No: 12722 Type: BR3-IE60x110 |
33,23 EUR
≈ £28.41 | ≈ $38.45
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
 |
Ggk 12723 BR3-AE 60x110 A = 180mm mitred, alpine white External corner
Outside corner 90°, made from the base profile of the PVC parapet duct, for laying cables around wall projections, leg length: 180 mm. Lieske Part No.: 883670 Mfg Part No: 12723 Type: BR3-AE60x110 |
33,74 EUR
≈ £28.85 | ≈ $39.04
Delivery time on requestinfo_outline
|
 |
Ggk 12724 OFFICE / BR3-AE 60x110, 7035, (a = 180 mm)
Outside corner 90°, made from the base profile of the PVC parapet duct, for laying cables around wall projections, leg length: 180 mm. Lieske Part No.: 178947 Mfg Part No: 12724 Type: BR3-AE60x110 |
33,74 EUR
≈ £28.85 | ≈ $39.04
Delivery time on requestinfo_outline
|
 |
Ggk 12725 BR # 54 # 60x170 60x170 mm external corner, light gray
Outside corner 90°, made from the base profile of the PVC parapet duct, for laying cables around wall projections, leg length: 180 mm. Lieske Part No.: 511350 Mfg Part No: 12725 Type: BR3-AE60x170 |
56,10 EUR
≈ £47.97 | ≈ $64.91
Delivery time on requestinfo_outline
|
 |
GGK 12732 End piece ES for BR 60x110/80 light gray RAL7035
End piece as a molded part for parapet ducts, for a clean finish and to cover open ends of the parapet ducts, spanning 3 sides for a parapet duct mounted on the wall. Lieske Part No.: 1324157 Mfg Part No: 12732 |
10,02 EUR
≈ £8.57 | ≈ $11.59
Delivery time on requestinfo_outline
|
 |
Ggk 12738 BR # 54 # 60x170 flat angle, light gray
Flat angle, made from the base profile of the PVC parapet duct, for laying cables with a 90° change of direction on the wall, leg length: 200 mm. Lieske Part No.: 629309 Mfg Part No: 12738 Type: BR3-FW60x170 |
50,90 EUR
≈ £43.52 | ≈ $58.89
Delivery time on requestinfo_outline
|
 |
Ggk 12763 end plate alpine white 60x110 mm, 60x110 mm alpine white
End piece as a molded part for parapet ducts, for a clean finish and to cover open ends of the parapet ducts, spanning 4 sides for a parapet duct mounted on wall brackets. Lieske Part No.: 835716 Mfg Part No: 12763 Type: BR3-ES60x110 |
12,85 EUR
≈ £10.99 | ≈ $14.87
Delivery time on requestinfo_outline
|
 |
Ggk 12764 end plate 60x110 mm light gray, light gray 60x110 mm
End piece as a molded part for parapet ducts, for a clean finish and to cover open ends of the parapet ducts, spanning 4 sides for a parapet duct mounted on wall brackets. Lieske Part No.: 294481 Mfg Part No: 12764 Type: BR3-ES60x110 |
12,85 EUR
≈ £10.99 | ≈ $14.87
Delivery time on requestinfo_outline
|
 |
Ggk 12771 Tail for wall duct, BRS3-ES 60x110 / 3, 9010-3-s.
End piece as a molded part for parapet duct made of sheet steel, for a clean finish and to cover open ends of the parapet ducts, spanning 3 sides for a parapet duct mounted on the wall. Lieske Part No.: 234187 Mfg Part No: 12771 Type: BRS3-ES60x110/3 |
29,16 EUR
≈ £24.93 | ≈ $33.74
Delivery time on requestinfo_outline
|
 |
Ggk 12774 endplate 3-sided cross, 60x110 mm
End piece as a molded part for parapet duct made of sheet steel, for a clean finish and to cover open ends of the parapet ducts, spanning 3 sides for a parapet duct mounted on the wall. Lieske Part No.: 401785 Mfg Part No: 12774 Type: BRS3-ES60x110/3 |
19,98 EUR
≈ £17.08 | ≈ $23.12
Delivery time on requestinfo_outline
|