Lightning protection material in Grounding Systems
Lightning protection material from Dehn + Soehne
 |
 Dehn + Soehne 380209 Dehn KS 200 B11.11 FL30X4 V2A clamping piece NIRO 200kA FL 30x4mm with square hole
Clamping piece for connecting flat material to structural parts. Lightning current carrying capacity tested up to 200 kA (10/350 µs) in accordance with DIN EN 62561-1. Version for flat conductors.Lieske Part No.: 1002702 Mfg Part No: 380209 Type: KS 200 B11.11 FL30X4 V2A |
26,33 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 385202 Dehn Verbindungsmuffe , round wire 7-10 mm ZG
Connecting sleeves according to DIN EN 62561-1, for connecting two round conductors in a longitudinal arrangement with four M6 screws. Version ZG 7-10. Lieske Part No.: 270806 Mfg Part No: 385202 |
6,24 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 385203 Dehn VM8SKM6X10ZG connecting sleeve ZG for Rd 8mm with 4 screws M6x10mm
Connecting sleeves according to DIN EN 62561-1, for connecting two round conductors in a longitudinal arrangement with four M6 screws. Version ZG 8. Lieske Part No.: 444247 Mfg Part No: 385203 |
6,04 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 385207 Our concern through joint Cu 385 207, m. 4 screws M6 stainless
Connecting sleeves according to DIN EN 62561-1, for connecting two round conductors in a longitudinal arrangement with four M6 screws. Version Cu 8. Lieske Part No.: 720934 Mfg Part No: 385207 |
10,40 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 385213 Dehn Al socket connection for Rd 8 mm,
Connecting sleeves according to DIN EN 62561-1, for connecting two round conductors in a longitudinal arrangement with four M6 screws. Version AL 8. Lieske Part No.: 756731 Mfg Part No: 385213 |
4,75 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 385216 DEHN 385,216 through joint Al f. 1 Rd,
Connecting sleeve with embossing (stop) when connecting air-termination rods (Rd 16 mm) with longer lengths (transport length), with four M8 screws (secured against self-loosening). Lieske Part No.: 704075 Mfg Part No: 385216 |
15,94 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390050 Dehn MV clamp 390 050, 8-10mm M10x30mm St / tZn NIRO
Multi-purpose connection terminal according to DIN EN 62561-1, for universal use as cross, T and parallel terminal for round conductors. Two-part design with hexagon screw and thread in the lower part. Lieske Part No.: 189348 Mfg Part No: 390050 |
3,66 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Dehn + Soehne 390057 Dehn MV terminal Cu for Rd 8-10 mm,
Multi-purpose connection terminal according to DIN EN 62561-1, for universal use as cross, T and parallel terminal for round conductors. Two-part design with hexagon screw and thread in the lower part. Lieske Part No.: 868027 Mfg Part No: 390057 |
12,38 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390059 Dehn MV terminal NIRO (V2A) for Rd 8-10 mm,
Multi-purpose connection terminal according to DIN EN 62561-1, for universal use as cross, T and parallel terminal for round conductors. Two-part design with hexagon screw and thread in the lower part. Lieske Part No.: 154082 Mfg Part No: 390059 |
8,61 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390060 DEHN MV Clamp St / tZn f. 8-10m Rd, Flachrundschraube u. Nut
Multi-purpose connection terminal according to DIN EN 62561-1, for universal use as cross, T and parallel terminal for round conductors. Two-part design with round-head screw and anti-twist protection. Lieske Part No.: 243089 Mfg Part No: 390060 |
4,06 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390061 Our concern MV clamp Rd 8-10 mm Al ,
Multi-purpose connection terminal according to DIN EN 62561-1, for universal use as cross, T and parallel terminal for round conductors. Two-part design with round-head screw and anti-twist protection. Lieske Part No.: 354268 Mfg Part No: 390061 |
6,44 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390067 Our concern MV clamp m.Rundschr. Cu 390,067, material thickness = 3mm D = 8mm
Multi-purpose connection terminal according to DIN EN 62561-1, for universal use as cross, T and parallel terminal for round conductors. Two-part design with round-head screw and anti-twist protection. Lieske Part No.: 691558 Mfg Part No: 390067 |
12,77 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390079 Our concern MV clamp NIRO (V4A) f. Rd 8-10 mm, m. Hex bolt
Multi-purpose connection terminal according to DIN EN 62561-1, for universal use as cross, T and parallel terminal for round conductors. Two-part design with hexagon screw and thread in the lower part. Lieske Part No.: 383875 Mfg Part No: 390079 |
11,78 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390119 Dehn KB 6.10 B9 V2A clamping block Rd 6-10mm stainless steel with hole D9mm
Lieske Part No.: 678861 Mfg Part No: 390119 Type: KB 6.10 B9 V2A |
1,98 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390120 Dehn LH DQ 6.10 ND6X60 V2A line holder DEHNQUICK STAINLESS STEEL
DEHNQUICK cable holder for laying round cables, e.g. flush-mounted or on the wall (behind the thermal insulation composite system). Version with nail dowel 6 x 60 mm, pre-assembled. Lieske Part No.: 1102318 Mfg Part No: 390120 Type: LH DQ 6.10 ND6X60 V2A |
3,07 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390121 Dehn LH DQ 6.10 ND8X80 STTZN line holder DEHNQUICK St/tZn
DEHNQUICK cable holder for laying round cables, e.g. flush-mounted or on the wall (behind the thermal insulation composite system). Version with nail dowel 8 x 80 mm, pre-assembled. Lieske Part No.: 1595955 Mfg Part No: 390121 Type: LH DQ 6.10 ND8X80 STTZN |
2,87 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390150 Dehn terminal block, 6-10mm 390 150, M10x35mm St / tZn
Clamping bracket variant program according to DIN EN 62561-1, e.g. as a connection with end piece for structures or on rain pipe clamps. Version with 11 mm square hole and round-head screw. Lieske Part No.: 850657 Mfg Part No: 390150 |
2,87 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390157 Dehn KB 6.10 FRM10X35 CU clamp Rd 6-10mm Cu flat screw nut M10 stainless steel
Clamping bracket variant program according to DIN EN 62561-1, e.g. as a connection with end piece for structures or on rain pipe clamps. Version with 11 mm square hole and round-head screw. Lieske Part No.: 1427219 Mfg Part No: 390157 Type: KB 6.10 FRM10X35 CU |
6,83 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390159 Dehn KB6.10FRM10X35V2A clamp Rd 6-10mm stainless steel
Clamping bracket variant program according to DIN EN 62561-1, e.g. as a connection with end piece for structures or on rain pipe clamps. Version with 11 mm square hole and round-head screw. Lieske Part No.: 429910 Mfg Part No: 390159 |
5,54 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390209 Dehn MVK 200 8.10 SKM10X30 V2A MV clamp NIRO 200kA for Rd 8-10mm with 6KT screw
MV terminal for universal use as cross, T and parallel terminal. Lightning current carrying capacity tested up to 200 kA (10/350 µs) in accordance with DIN EN 62561-1. Two-part design with hexagon ... Lieske Part No.: 1336910 Mfg Part No: 390209 Type: MVK 200 8.10 SKM10X30 V2A |
17,62 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390250 Dehn MMVK6.8FRM10X35STTZN MMV clamp St/tZn for Rd 6-8mm
Mini multi-purpose connection terminal according to DIN EN 62561-1, for universal use as cross, T and parallel terminal for round conductors. Two-part design with round-head screw and anti-twist ... Lieske Part No.: 437511 Mfg Part No: 390250 |
3,47 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390257 DEHN MMV-terminal Cu f. 6-8mm m Rd., Flachrundschraube u. Nut
Mini multi-purpose connection terminal according to DIN EN 62561-1, for universal use as cross, T and parallel terminal for round conductors. Two-part design with round-head screw and anti-twist ... Lieske Part No.: 604595 Mfg Part No: 390257 |
9,70 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390259 Dehn MMVK6.8FRM10X35V2A MMV clamp stainless steel for Rd 6-8mm
Mini multi-purpose connection terminal according to DIN EN 62561-1, for universal use as cross, T and parallel terminal for round conductors. Two-part design with round-head screw and anti-twist ... Lieske Part No.: 411506 Mfg Part No: 390259 |
8,02 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 390267 Dehn ZMMVK 6.8 FRM10X35 CU STTZNmmV clamp for Rd 6-8mm
Two-metal mini multi-purpose connection terminal according to DIN EN 62561-1, for universal use as cross, T and parallel terminal for round conductors. Three-part design with hexagon screw and thread ... Lieske Part No.: 473344 Mfg Part No: 390267 |
9,70 EUR
plus delivery charges
Delivery time on requestinfo_outline
|