The U-shaped serrated edge protector is ideal for protecting cables and wires when passing through, for example, housings and sheets. The narrow profile of the edge protector fits snugly against the punched cutout and provides clean, mechanical protection. If necessary, a drop of epoxy reinforces the edging. The powerful and reliable edge protector is particularly suitable for inner radii and is also easy to work with. It is available on a roll in various sizes for different sheet thicknesses.
Lieske Part No.: 300030

Our short-circuit-proof, single-phase, extra-narrow power supplies are approved according to CE/TÜV. The power supplies support predictive maintenance in the sense of Industry 4.0: The IO-Link interface enables all parameters to be integrated into the overall system diagnostics. Features: DIN rail mounting, adjustable output voltage from 24 V, output power 60 to 480 W, IP20, HEARTBEAT® - status display. Dimensions=116 x 70 x 150 mm, design=IP67, mounting=flange mounting, housing material=aluminum, connection (power supply IN)=7/8' plug, connection (power supply OUT)=7/8' socket, input voltage=100.240 V AC, single-phase, nominal output voltage DC=24 V, nominal output current=8 A, output power max.=192 W, output current max.=12 A for max. 4 s, protection class=IP67 with connector, approval/conformity=CEcURusWEEE, ambient temperature=-25...70 °C
Lieske Part No.: 992762

Functional principle = general electronic tool, design = sensor tester, connection = terminal connection, housing material = plastic, use = 3-wire sensor DC PNP/NPN
Lieske Part No.: 2070566

Our universal mounting system consists of the components base holder, mounting rods, cross connectors and joint pieces. Balluff offers a wide selection of sensor and reflector holders. You can choose between different materials such as POM, Al anodized, GD-Zn chrome-plated and stainless steel. The mounting system is flexible and robust as well as easy to install. Functional principle=mounting system, use=for optoelectronic sensors BOS 21Mfor reflectors BOS R-9, material=stainless steel, dimensions=61.5 x 34 x 59 mm, fastening=clamps
Lieske Part No.: 536531

Our sensor holders can be combined with the BMS mounting system. The high-quality sensor holders are designed and tested for Balluff magnetic field sensors. They are characterized by precision and durability. Functional principle=BMF mounting bracket, application=pneumatic cylinder with integrated groove, use=for magnetic field sensors BMF 305, material=anodized aluminum, ambient temperature=-40...85 °C
Lieske Part No.: 393104

The right reflector for every environment: Our round and cuboid reflectors and reflective foils are heat and chemical resistant. They are suitable for red light, white light, infrared and laser applications. Balluff reflectors are ideal for applications with BOS sensors. You can choose between different sizes and mounting options. Design=cube corner 1.2 mm, use=for optoelectronic reflective light barriersfor optoelectronic laser reflective light barriers, shape=cube2 mounting holes, dimensions=51 x 61 x 7.5 mm, active area=22.6 cm², ambient temperature=-20...60 °C, active area, material=PMMA, material=ABS, light type=unpolarized light, also for polarized light, mounting=adhesive screw M4
Lieske Part No.: 983982

The right reflector for every environment: Our round and cuboid reflectors and reflective foils are heat and chemical resistant. They are suitable for red light, white light, infrared and laser applications. Balluff reflectors are ideal for applications with BOS sensors. You can choose between different sizes and mounting options. Design=cube corner 4 mm, use=for optoelectronic reflective light barriers, shape=cube2 mounting holes, dimensions=19 x 60 x 6.1 mm, active area=4.9 cm², ambient temperature=-20...60 °C, active area, material=PMMA, material=ABS, light type=unpolarized light, also for polarized light, mounting=adhesive screw M4
Lieske Part No.: 983997

Our universal mounting system consists of the components base holder, mounting rods, cross connectors and joint pieces. Balluff offers a wide selection of sensor and reflector holders. You can choose between different materials such as POM, anodized aluminum, chrome-plated GD-Zn and stainless steel. The mounting system is flexible and robust as well as easy to install. Functional principle=mounting system, use=for mounting systems BMS for holding rods with Ø12 mm, material=chrome-plated zinc, matt, dimensions=60 x 30 x 36 mm, fastening=screws, clamps
Lieske Part No.: 620402

Functional principle=clamp holder, use=for capacitive sensors BCS R08, material=PP, dimensions=22 x 10 x 35 mm, fastening=screws, clamps, ambient temperature=-25...85 °C
Lieske Part No.: 2079494

Our brackets for our SmartLight signal lights and displays offer positioning and fastening in one. They are characterized by easy installation and a robust construction. The high-quality brackets are designed and tested for Balluff devices. You can combine the brackets for human machine interfaces with the BMS mounting system. Functional principle=SmartLight bracket, Use=for SmartLight signal light, Material=anodized aluminum, natural, Dimensions=Ø 70 x 250 mm, Fastening=screws
Lieske Part No.: 2070482

Our brackets for our SmartLight signal lights and displays offer positioning and fastening in one. They are characterized by easy installation and a robust construction. The high-quality brackets are designed and tested for Balluff devices. You can combine the brackets for human machine interfaces with the BMS mounting system. Functional principle=SmartLight bracket, Use=for Smartlight indicator, Material=anodized aluminum, natural, Dimensions=Ø 70 x 100 mm, Fastening=M5 screw
Lieske Part No.: 2070480

Our brackets for our SmartLight signal lights and displays offer positioning and fastening in one. They are characterized by easy installation and a robust construction. The high-quality brackets are designed and tested for Balluff devices. You can combine the brackets for human machine interfaces with the BMS mounting system. Functional principle=SmartLight bracket, Use=for SmartLight signal light, Material=anodized aluminum, natural, Dimensions=Ø 70 x 38 mm, Fastening=screws, clamps
Lieske Part No.: 2070485

Our sensor holders can be combined with the BMS mounting system. The high-quality sensor holders are designed and tested for Balluff magnetic field sensors. They are characterized by precision and durability. Functional principle=Adapter BMP, Application=Holder for round cylinders from Ø 10 mm, Use=for magnetic field position measuring system BMP, Material=PP
Lieske Part No.: 2070477

Our high-pressure-resistant inductive sensors can withstand a pressure of up to 500 bar. They are therefore perfect for monitoring the position of your hydraulics, such as for the end position control on hydraulic cylinders or the monitoring of valve positions. Inductive sensor, Ø 12 x 56 mm, connector, normally open (NO), nominal switching distance Sn=1.5 mm, flush, 500 bar, oil pressure-resistant, housing material=stainless steel, active surface, material=ceramic
Lieske Part No.: 981933

Magnetic field sensor, connection type 01=cable with connector, switching output 01=PNP, switching function 01=normally open (NO), housing material primary=LCP, protection class=IP67, fastening=mounting bracket BMF 303-HW*, application=particularly suitable for short-stroke cylinders due to optimized response path.
Lieske Part No.: 499107

Mechanical position switches are the classics in automation. The switching process is carried out by a telescopic plunger. This plunger is used to switch a mechanical switching element in a separate, sealed chamber. The optimal choice of plunger shape for the application in combination with our cams guarantees a long service life. Continuous current=1st switching point: 6.0 A, connection type=1st switching point: screw connection, ambient temperature=-5...80 °C, approval/conformity=CECSAWEEE
Lieske Part No.: 950120

Functional principle=switchgear, component=mechanical switchgear, design=safety DIN EN 60204-1, dimensions=185 x 140 x 187 mm, housing material=aluminum, switching element=1-6. Switching point: BSE 61, contact material=1-6. Switching point: fine silver, cable bushings, number=4 threaded outputs M25, cam rings=1-6. Switching point: 180°, drive type=right, max. speed=200 rpm, speed monitoring=without switching point loss, rated operating voltage Ue=1-6. Switching point: 250 V AC, continuous current=1-6. Switching point: 6 A, ambient temperature=-5...80 °C, approval/conformity=CEBGWEEE
Lieske Part No.: 950161

Inductive proximity switches according to DIN EN 60947-5-2. They detect the presence of metallic, electrically conductive objects in their measuring field without contact. The robust sensors can be used in a variety of ways in industry, e.g. in speed applications or for position determination.
Lieske Part No.: 265029

Cable clip suitable for fastening and releasing one or more hoses, round cables and lines of different diameters at any time. Particularly suitable for laying cables on very smooth, hard surfaces and in hard-to-reach places where the use of normal fastening bases/cable ties is not possible. Made of polyamide 6.6, natural colour, self-extinguishing in accordance with UL 94 V-2, self-adhesive, LxWxH 19x19x10 mm, maximum cable diameter 5 mm.
Sales unit: 100 pieces
Lieske Part No.: 670632

Cable clip suitable for fastening and releasing one or more hoses, round cables and lines of different diameters at any time. Particularly suitable for laying cables on very smooth, hard surfaces and in hard-to-reach places where the use of normal fastening bases/cable ties is not possible. Made of polyamide 6.6, natural colour, self-extinguishing in accordance with UL 94 V-2, self-adhesive, LxWxH 26x26x13 mm, maximum cable diameter 10 mm.
Sales unit: 100 pieces
Lieske Part No.: 427228

Cable clip, LxWxH 26x26x18 mm, max. cable diameter 10 mm, self-adhesive
Sales unit: 100 pieces
Lieske Part No.: 475633

Sales unit: 100 pieces
Lieske Part No.: 820370

Sales unit: 100 pieces
Lieske Part No.: 820405

Sales unit: 100 pieces
Lieske Part No.: 803031

Sales unit: 100 pieces
Lieske Part No.: 803076

Sales unit: 100 pieces
Lieske Part No.: 803165

Sales unit: 100 pieces
Lieske Part No.: 803222

Sales unit: 100 pieces
Lieske Part No.: 818518

Sales unit: 100 pieces
Lieske Part No.: 818520

Sales unit: 100 pieces
Lieske Part No.: 818563

Sales unit: 100 pieces
Lieske Part No.: 818285

Sales unit: 100 pieces
Lieske Part No.: 819477

Sales unit: 100 pieces
Lieske Part No.: 810660

Sales unit: 100 pieces
Lieske Part No.: 818132

Sales unit: 100 pieces
Lieske Part No.: 818958

Sales unit: 100 pieces
Lieske Part No.: 819311

Sales unit: 100 pieces
Lieske Part No.: 818174

Sales unit: 100 pieces
Lieske Part No.: 818825

Sales unit: 100 pieces
Lieske Part No.: 803026

Sales unit: 100 pieces
Lieske Part No.: 803131

Sales unit: 100 pieces
Lieske Part No.: 803178

Sales unit: 100 pieces
Lieske Part No.: 818487

Lieske Part No.: 727111

Sales unit: 100 pieces
Lieske Part No.: 526550

Lieske Part No.: 264943

Spacer for air-termination rods to maintain the separation distance in accordance with DIN EN 62305-3 (VDE 0185-305-3). Spacer rod made of glass-fiber reinforced plastic (GRP) D16 mm, UV-stabilized, color light gray, material factor km= 0.7. Version with rod holder (fixed cable routing) and pipe clamp (clamping range D50-300 mm).
Lieske Part No.: 457402

Pipe clamp with mounting bushing for spacer rod (D16 mm), for pipes up to 60 mm diameter.
Lieske Part No.: 784493

Antenna pipe clamp according to DIN EN 62561-1, for connecting pipes to the protective and functional equipotential bonding according to DIN VDE 0100-410/540 and the lightning protection equipotential bonding according to DIN EN 62305-3 (VDE 0185-305-3). Complete with continuously adjustable clamping band made of stainless steel, for connecting 1 conductor Rd D10 mm or 1-2 conductors Rd D6-8 mm or 4-50 mm² (single-/multi-wire).
Lieske Part No.: 271910

Non-continuous cable management solution with a wide base and smooth beveled edges. Provides optimal support for high-performance data cables, including CAT7 and fiber optic cables. 33 mm (1 5/16¿) diameter.
Sales unit: 50 pieces
Lieske Part No.: 1264075

Easy installation to support flanges. Provides optimal support for high performance data cables up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic. Offers superior fill capacity and load bearing capacity beyond most other single bracket alternatives. Rounded edges on the J-hooks allow support of the appropriate bend radius of high performance data cables. Cost effective alternative to expensive cable trays. Conforms to EN 50174-2. Conforms to ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569.
Sales unit: 50 pieces
Lieske Part No.: 1263608