Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 24 - 26 mm
Sales unit: 100 pieces
Lieske Part No.: 398488

NIEDAX - Manufacturer: B 26 E3
Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 22 - 26 mm

NIEDAX model no. B 26 E3

Type: B26E3
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 447721

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 26 - 28 mm
Sales unit: 100 pieces
Lieske Part No.: 137202

NIEDAX - Manufacturer: B 29
Series clip, made of impact-resistant polystyrene, gray, halogen-free, cylinder head screw M4 x ... according to DIN EN ISO
2 7 and square nut galvanized to DIN ISO 42 or DIN 4 5 96
For NIEDAX C rails 29
, 29
3, 29
4 and 292 with

mm slot width. for cable diameter: 5 - 25mm NIEDAX Model No.: B 29th
Type: B29
Sales unit:
ST.
Lieske Part No.: 800287

NIEDAX - Manufacturer: B 293 Series clip, made ​​of impact-resistant polystyrene, gray, halogen-free, cylinder head screw M4 x ... according to DIN EN ISO
7 and 2 slide nut galvanized to DIN ISO 42 or DIN 4 5 96
, for NIEDAX C rails 29
, 29
3, 29
4 and 292 with mm slot width.

for cable diameter:
3 - 38 mm NIEDAX Model No.: B293 Type: B293 sales unit.
ST.
Sales unit: 100 pieces
Lieske Part No.: 803219

NIEDAX - Manufacturer: B 30
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameters 26 - 30 mm

NIEDAX model no. B 30

Type: B30
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 152640

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 26 - 30 mm
Sales unit: 100 pieces
Lieske Part No.: 363742

NIEDAX - Manufacturer: B 3/2 AL Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO
2 7, all-aluminum, suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately. Occupancy above the other 2 cables for cable diameter. 26-3 mm NIEDAX Model No.: B 3/2 AL Type: B3 / 2AL item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 817358

NIEDAX - Manufacturer: B 30/2 E3
hammer Foot-clamp with pressure trough, completely made ​​of stainless steel, material no 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW.. .) and dual sinks (DW. ..) must be ordered separately. occupancy above the other 2 cables for cable diameter: 28 - 30 mm NIEDAX model no.:. B 30/2 E3 Type: B30/2E3








Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 208460

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 28 - 30 mm
Sales unit: 100 pieces
Lieske Part No.: 720291

NIEDAX - Manufacturer: B 3 AL Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO
2 7, all-aluminum, suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 26 - 3 mm NIEDAX Model No.: B 3 AL Type: B3 AL sales unit.
ST.
Lieske Part No.: 710244

NIEDAX - Manufacturer: B 3 E3 Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no.
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 26 - 3 mm NIEDAX Model No.: B 3 E3 Type: B3 E3 sales unit.
ST.
Sales unit: 100 pieces
Lieske Part No.: 752886

NIEDAX - Manufacturer: B 34
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameters 30 - 34 mm

NIEDAX model no. B 34

Type: B34
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 178168

NIEDAX - Manufacturer: B 34/2
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW / GWS ... ) and dual sinks (DW. ..) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy above the other 2 cables for cable diameters 30 - 34 mm NIEDAX model no. B 34/2 Type: B34 / 2






Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 564577

Hammer foot clamp, with pressure pan and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 30 - 34 mm
Sales unit: 100 pieces
Lieske Part No.: 890883

NIEDAX - Manufacturer: B 34/2 E3
Hammerfoot-clamp with pressure trough, completely made ​​of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately. occupancy above the other 2 cables for cable diameter: 32 - 34 mm NIEDAX model No.:. B 34/2 E3 Type: B34/2E3








Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 661399

NIEDAX - Manufacturer: B 34 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 30 - 34 mm

NIEDAX model no. B 34 AL

Type: B34AL
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 440172

NIEDAX - Manufacturer: B 34 E3
Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 30 - 34 mm

NIEDAX model no. B 34 E3

Type: B34E3
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 270677

NIEDAX - Manufacturer: B 38 Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules! Occupancy:
Cable for cable diameter: 34 - 38 mm NIEDAX Model No.: B 38 Type: B38 sales unit.
ST.
Sales unit: 100 pieces
Lieske Part No.: 768170

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 34 - 38 mm
Sales unit: 50 pieces
Lieske Part No.: 477068

NIEDAX - Manufacturer: B 38/2 AL Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO
2 7, all-aluminum, suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately. Occupancy above the other 2 cables for cable diameter: 34 - 38 mm NIEDAX model no. B 38/2 AL Type: B38/2AL item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 957976

NIEDAX - Manufacturer: B 38/2 E3 Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no.
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately. Occupancy above the other 2 cables for cable diameters 36 - 38 mm NIEDAX model no. B 38/2 E3 Type: B38/2E3 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 960423

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for Niedax anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 34 - 38 mm
Sales unit: 100 pieces
Lieske Part No.: 994727

NIEDAX - Manufacturer: B 38 E3 Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no.
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 34 - 38 mm NIEDAX Model No.: B 38 E3 Type: B38E3 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 104933

NIEDAX - Manufacturer: B 42
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameters 38 - 42 mm

NIEDAX model no. B42 Type: B42


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 374715

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 38 - 42 mm
Sales unit: 50 pieces
Lieske Part No.: 979431

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for Niedax anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 38 - 42 mm
Sales unit: 50 pieces
Lieske Part No.: 788694

Hammer foot clamp, with pressure tray, made entirely of stainless steel, material no. 1.4301, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 40 - 42 mm
Sales unit: 50 pieces
Lieske Part No.: 122036

NIEDAX - Manufacturer: B 42 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 38 - 42 mm

NIEDAX model no. B 42 AL

Type: B42AL
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 408273

NIEDAX - Manufacturer: B 46
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameter: 42 - 46 mm

NIEDAX model no. B 46

Type: B46
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 321019

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 42 - 46 mm
Sales unit: 50 pieces
Lieske Part No.: 667210

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for Niedax anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 42 - 46 mm
Sales unit: 50 pieces
Lieske Part No.: 938206

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for Niedax anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 42 - 46 mm
Sales unit: 100 pieces
Lieske Part No.: 698783

NIEDAX - Manufacturer: B 46 E3 Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no.
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 42 - 46 mm NIEDAX Model No.: B 46 E3 Type: B46E3 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 718720

Series clamp, made of impact-resistant grey polystyrene, halogen-free, cylinder head screw M4x... in accordance with DIN EN ISO 1207 and sliding nut galvanised in accordance with DIN EN ISO 4042 or DIN 50962 / DIN EN ISO 19598, for NIEDAX C-profile rails 2970, 2971, 2972, 2975 and 2980 with 16-17 mm slot width. for cable Ø: 7 - 25 mm
Sales unit: 50 pieces
Lieske Part No.: 591185

Series clamp, made of impact-resistant grey polystyrene, halogen-free, cylinder head screw M4x... in accordance with DIN EN ISO 1207 and sliding nut galvanised in accordance with DIN EN ISO 4042 or DIN 50962 / DIN EN ISO 19598, for NIEDAX C-profile rails 2970, 2971, 2972, 2975 and 2980 with 16-17 mm slot width. for cable Ø: 13 - 38 mm
Sales unit: 50 pieces
Lieske Part No.: 1426051

NIEDAX - Manufacturer: B 5 Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) must be ordered separately. For use in the functional integrity please follow additional rules! Occupancy:
Cable for cable diameter. 46-5 mm NIEDAX Model No: 5 Type B: B5 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 978013

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 46 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 686809

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 46 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 324458

Hammer foot clamp, with pressure tray, made entirely of stainless steel, material no. 1.4301, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 48 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 589405

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 46 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 672244

NIEDAX - Manufacturer: B 5 E3 Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no.
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 46 - 5 mm NIEDAX Model Number: B type 5 E3: E3 B5 item.
ST.
Sales unit: 50 pieces
Lieske Part No.: 927194

NIEDAX - Manufacturer: B 54 Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) must be ordered separately. For use in the functional integrity please follow additional rules! Occupancy:
Cable for cable diameter 5 - 54 mm NIEDAX Model No.: B54 Type: B54 sales unit.
ST.
Sales unit: 50 pieces
Lieske Part No.: 813317

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 50 - 54 mm
Sales unit: 50 pieces
Lieske Part No.: 182447

NIEDAX - Manufacturer: B 54 E3
Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 50 - 54 mm

NIEDAX model no. B54 E3

Type: B54E3
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 392957

NIEDAX - Manufacturer: B 58
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) must be ordered separately are. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameter: 54 - 58 mm

NIEDAX model no. B58 Type: B58


Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 165341

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 54 - 58 mm
Sales unit: 50 pieces
Lieske Part No.: 297505

NIEDAX - Manufacturer: B 58 Foot Hammer E3-clamp with pressure trough, completely made of stainless steel, material no
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable Diameters. 54-58 mm NIEDAX Model No:. B58 E3 Type: B58E3 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 785842

NIEDAX - Manufacturer: B 64
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) must be ordered separately are. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameter: 58 - 64 mm

NIEDAX model no. B 64 Type: B64


Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 653176

NIEDAX - Manufacturer: B 64 AL Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO
2 7, all-aluminum, suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 58 - 64 mm NIEDAX Model No.: B 64 AL Type: B64AL item: 5 ea..
Sales unit: 50 pieces
Lieske Part No.: 851215