Ro-Clip-Rohrschelle, aneinanderreihbar, mit Befestigungslangloch, zur Schraub- und Schlagdübelmontage (max. Ø 6 mm), auf Gewinde M 6 aufschraubbar, halogenfrei. Nicht flammausbreitend geprüft nach DIN EN 61386-1. Bei Anreihungen ist jede zweite Schelle mit dem Untergrund zu verbinden, damit die sichere Befestigung der Rohre / Kabel gewährleistet ist. Abmessungen (ca. Maße) H x B x L : 36,5 x 14,8 x 38,5 mm Befestigungslangloch : 4,5 x 12,4 mm für Kabel-Ø : 28 - 29 mm Einsatztemperatur : -40° bis 90°C Werkstoff : PP (Polypropylen) Farbton : lichtgrau RAL : 7035 (ähnlich)
Sales unit: 100 pieces
Lieske Part No.: 1241180

Ro-Clip-Rohrschelle, aneinanderreihbar, mit Befestigungslangloch, zur Schraub- und Schlagdübelmontage (max. Ø 6 mm), auf Gewinde M 6 aufschraubbar, halogenfrei. Nicht flammausbreitend geprüft nach DIN EN 61386-1. Bei Anreihungen ist jede zweite Schelle mit dem Untergrund zu verbinden, damit die sichere Befestigung der Rohre / Kabel gewährleistet ist. Abmessungen (ca. Maße) H x B x L : 34,5 x 14,8 x 34 mm Befestigungslangloch : 4,5 x 12,4 mm für Kabel-Ø : 25 - 26 mm für metrische Rohre nach DIN EN 60423 : M 25 Einsatztemperatur : -40° bis 90°C Werkstoff : PP (Polypropylen) Farbton : lichtgrau RAL : 7035 (ähnlich)
Sales unit: 100 pieces
Lieske Part No.: 1241187

Ro-Clip-Rohrschelle, aneinanderreihbar, mit Befestigungslangloch, zur Schraub- und Schlagdübelmontage (max. Ø 6 mm), auf Gewinde M 6 aufschraubbar, halogenfrei. Nicht flammausbreitend geprüft nach DIN EN 61386-1. Bei Anreihungen ist jede zweite Schelle mit dem Untergrund zu verbinden, damit die sichere Befestigung der Rohre / Kabel gewährleistet ist. Abmessungen (ca. Maße) H x B x L : 43 x 14,8 x 47,5 mm Befestigungslangloch : 4,5 x 12,4 mm für Kabel-Ø : 37 - 38 mm Einsatztemperatur : -40° bis 90°C Werkstoff : PP (Polypropylen) Farbton : lichtgrau RAL : 7035 (ähnlich)
Sales unit: 50 pieces
Lieske Part No.: 1241183

Ro-Clip-Rohrschelle, aneinanderreihbar, mit Befestigungslangloch, zur Schraub- und Schlagdübelmontage (max. Ø 6 mm), auf Gewinde M 6 aufschraubbar, halogenfrei. Nicht flammausbreitend geprüft nach DIN EN 61386-1. Bei Anreihungen ist jede zweite Schelle mit dem Untergrund zu verbinden, damit die sichere Befestigung der Rohre / Kabel gewährleistet ist. Abmessungen (ca. Maße) H x B x L : 38,5 x 14,8 x 41 mm Befestigungslangloch : 4,5 x 12,4 mm für Kabel-Ø : 31 - 32 mm für metrische Rohre nach DIN EN 60423 : M 32 Einsatztemperatur : -40° bis 90°C Werkstoff : PP (Polypropylen) Farbton : lichtgrau RAL : 7035 (ähnlich)
Sales unit: 50 pieces
Lieske Part No.: 1241219

Ro-Clip-Rohrschelle, aneinanderreihbar, mit Befestigungslangloch, zur Schraub- und Schlagdübelmontage (max. Ø 6 mm), auf Gewinde M 6 aufschraubbar, halogenfrei. Nicht flammausbreitend geprüft nach DIN EN 61386-1. Bei Anreihungen ist jede zweite Schelle mit dem Untergrund zu verbinden, damit die sichere Befestigung der Rohre / Kabel gewährleistet ist. Abmessungen (ca. Maße) H x B x L : 45,5 x 14,8 x 50,5 mm Befestigungslangloch : 4,5 x 12,4 mm für Kabel-Ø : 40 - 41 mm für metrische Rohre nach DIN EN 60423 : M 40 Einsatztemperatur : -40° bis 90°C Werkstoff : PP (Polypropylen) Farbton : lichtgrau RAL : 7035 (ähnlich)
Sales unit: 50 pieces
Lieske Part No.: 1241184

Ro-Clip-Rohrschelle, aneinanderreihbar, mit Befestigungslangloch, zur Schraub- und Schlagdübelmontage (max. Ø 6 mm), auf Gewinde M 6 aufschraubbar, halogenfrei. Nicht flammausbreitend geprüft nach DIN EN 61386-1. Bei Anreihungen ist jede zweite Schelle mit dem Untergrund zu verbinden, damit die sichere Befestigung der Rohre / Kabel gewährleistet ist. Abmessungen (ca. Maße) H x B x L : 66,5 x 14,8 x 74 mm Befestigungslangloch : 4,5 x 12,4 mm für Kabel-Ø : 59 - 60 mmm Einsatztemperatur : -40° bis 90°C Werkstoff : PP (Polypropylen) Farbton : lichtgrau RAL : 7035 (ähnlich)
Sales unit: 25 pieces
Lieske Part No.: 1241526

Ro-Clip-Rohrschelle, aneinanderreihbar, mit Befestigungslangloch, zur Schraub- und Schlagdübelmontage (max. Ø 6 mm), auf Gewinde M 6 aufschraubbar, halogenfrei. Nicht flammausbreitend geprüft nach DIN EN 61386-1. Bei Anreihungen ist jede zweite Schelle mit dem Untergrund zu verbinden, damit die sichere Befestigung der Rohre / Kabel gewährleistet ist. Abmessungen (ca. Maße) H x B x L : 58,5 x 14,8 x 63 mm Befestigungslangloch : 4,5 x 12,4 mm für Kabel-Ø : 50 - 51 mm für metrische Rohre nach DIN EN 60423 : M 50 Einsatztemperatur : -40° bis 90°C Werkstoff : PP (Polypropylen) Farbton : lichtgrau RAL : 7035 (ähnlich)
Sales unit: 25 pieces
Lieske Part No.: 1241185

Ro-Clip-Rohrschelle, aneinanderreihbar, mit Befestigungslangloch, zur Schraub- und Schlagdübelmontage (max. Ø 6 mm), auf Gewinde M 6 aufschraubbar, halogenfrei. Nicht flammausbreitend geprüft nach DIN EN 61386-1. Bei Anreihungen ist jede zweite Schelle mit dem Untergrund zu verbinden, damit die sichere Befestigung der Rohre / Kabel gewährleistet ist. Abmessungen (ca. Maße) H x B x L : 69 x 14,8 x 80 mm Befestigungslangloch : 4,5 x 12,4 mm für Kabel-Ø : 63 - 64 mm für metrische Rohre nach DIN EN 60423 : M 63 Einsatztemperatur : -40° bis 90°C Werkstoff : PA (Polyamid) Farbton : lichtgrau RAL : 7035 (ähnlich)
Sales unit: 100 pieces
Lieske Part No.: 1243348

Rundschelle, mit vormontiertem Nagel, halogenfrei. Abmessungen (ca. Maße) H x B x L : 10 x 7,5 x 17,5 mm für Kabel-Ø : 8 mm Anzahl der Leitungen : 1 Nagellänge NL : 25 mm für Nagel-Ø : 2 mm Werkstoff : PE (Polyethylen) Werkstoff Nagel : Stahl, galvanisch verzinkt Farbton : lichtgrau RAL : 7035 (ähnlich)
Sales unit: 100 pieces
Lieske Part No.: 124152

Rundschelle, mit vormontiertem Nagel, halogenfrei. Abmessungen (ca. Maße) H x B x L : 10 x 7,5 x 17,5 mm für Kabel-Ø : 8 mm Anzahl der Leitungen : 1 Nagellänge NL : 35 mm für Nagel-Ø : 2 mm Werkstoff : PE (Polyethylen) Werkstoff Nagel : Stahl, galvanisch verzinkt Farbton : lichtgrau RAL : 7035 (ähnlich)
Sales unit: 100 pieces
Lieske Part No.: 1241519

Rundschelle, mit vormontiertem Nagel, halogenfrei. Abmessungen (ca. Maße) H x B x L : 11,5 x 9,5 x 17,5 mm für Kabel-Ø : 9 mm Anzahl der Leitungen : 1 Nagellänge NL : 25 mm für Nagel-Ø : 2 mm Werkstoff : PE (Polyethylen) Werkstoff Nagel : Stahl, galvanisch verzinkt Farbton : lichtgrau RAL : 7035 (ähnlich)
Sales unit: 100 pieces
Lieske Part No.: 1241518

Rundschelle, mit vormontiertem Nagel, halogenfrei. Abmessungen (ca. Maße) H x B x L : 11,5 x 9,5 x 17,5 mm für Kabel-Ø : 9 mm Anzahl der Leitungen : 1 Nagellänge NL : 25 mm für Nagel-Ø : 2 mm Werkstoff : PE (Polyethylen) Werkstoff Nagel : Stahl, galvanisch verzinkt Farbton : hellelfenbein RAL : 1015 (ähnlich)
Sales unit: 1000 pieces
Lieske Part No.: 1243330

Rundschelle, mit vormontiertem Nagel, halogenfrei. Abmessungen (ca. Maße) H x B x L : 11,5 x 9,5 x 17,5 mm für Kabel-Ø : 9 mm Anzahl der Leitungen : 1 Nagellänge NL : 35 mm für Nagel-Ø : 2 mm Werkstoff : PE (Polyethylen) Werkstoff Nagel : Stahl, galvanisch verzinkt Farbton : lichtgrau RAL : 7035 (ähnlich)
Lieske Part No.: 1241517

Rundschelle, mit vormontiertem Nagel, halogenfrei. Abmessungen (ca. Maße) H x B x L : 11,5 x 9,5 x 17,5 mm für Kabel-Ø : 9 mm Anzahl der Leitungen : 1 Nagellänge NL : 50 mm für Nagel-Ø : 2 mm Werkstoff : PE (Polyethylen) Werkstoff Nagel : Stahl, galvanisch verzinkt Farbton : hellelfenbein RAL : 1015 (ähnlich)
Lieske Part No.: 1243326

Mounting clamp SILVYN® SCH 35-50 S, Mounting clamp, Clamping range (min./max.): 35mm - 50mm, Steel, Areas of application: SILVYN® SSV-M/SSVZ-M,SILVYN® SSV/SSV-Z,In combination with:, Benefits: Clamps several hose dimensions with one clamp,Enables safe strain relief
Sales unit: 50 pieces
Lieske Part No.: 1313104

Fastening element CORD CLIPS CC 11 CABLE CLAMP, fastening element, natural, polyamide, halogen-free, , Areas of application: Also suitable for parallel laying of several cables, Fastening elements for cables and lines, Suitable for cables up to 14.5 mm in diameter, Hook holders made of nylon with adhesive strips, Benefits: The special profile of this holder enables quick assembly and disassembly of one or more cables without damaging the insulation, No preparatory work such as mounting holes necessary
Sales unit: 100 pieces
Lieske Part No.: 436966

Fastening element CORD CLIPS CC 21 CABLE CLAMP, fastening element, natural, polyamide, halogen-free, , Areas of application: Also suitable for parallel laying of several cables, Fastening elements for cables and lines, Suitable for cables up to 14.5 mm in diameter, Hook holders made of nylon with adhesive strips, Benefits: The special profile of this holder enables quick assembly and disassembly of one or more cables without damaging the insulation, No preparatory work such as mounting holes necessary
Sales unit: 100 pieces
Lieske Part No.: 2055621

Bracket SILVYN® RKS 1 18/15, bracket, for hose outer diameter: 18.0mm, bore diameter: 6.4mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for versatile areas of application, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 2055642

Bracket SILVYN® RKS 1 8/12, bracket, for hose outer diameter: 8.0mm, bore diameter: 5.3mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for versatile areas of application, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 438067

Bracket SILVYN® RKS 1 10/12, bracket, for hose outer diameter: 10.0mm, bore diameter: 5.3mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for versatile areas of application, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 438064

Bracket SILVYN® RKS 1 13/15, bracket, for hose outer diameter: 13.0mm, bore diameter: 6.4mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for versatile areas of application, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 2055641

Bracket SILVYN® RKS 1 32/15, bracket, for hose outer diameter: 32.0mm, bore diameter: 6.4mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for a wide range of applications, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 438075

Bracket SILVYN® RKS 1 14/15, bracket, for hose outer diameter: 14.0mm, bore diameter: 6.4mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for a wide range of applications, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 438070

Bracket SILVYN® RKS 1 15/15, bracket, for hose outer diameter: 15.0mm, bore diameter: 6.4mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for a wide range of applications, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 667633

Bracket SILVYN® RKS 1 20/15, bracket, for hose outer diameter: 20.0mm, bore diameter: 6.4mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for versatile areas of application, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 438073

Bracket SILVYN® RKS 1 25/15, bracket, for hose outer diameter: 25.0mm, bore diameter: 8.4mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for a wide range of applications, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 1312107

SCHLAUCHSCHELLE FS30, Ø Schlauch: 30 mm, Type: FS30
Lieske Part No.: 507864

Cable clamp, cable diameter: 40-44 mm, sendzimir galvanized
Lieske Part No.: 1331016

Cable clamp, cable diameter: 44-48 mm, sendzimir galvanized
Lieske Part No.: 1331015

Additional equipment for sensors
Lieske Part No.: 302463

NIEDAX - Brand: 222 D
toggle bolts threaded rod, galvanized according to DIN 50961, blue passivated, for cavity walls and ceilings, including 2 washers according to DIN EN ISO 7089 and hexagon nuts according to DIN EN ISO 4035th The load values ​​include a safety factor of 4 The carrying capacity apply only with adequate bearing capacity of the ground.

Threaded rod: M 4 threaded rod length: 100 mm Capacity Q: 0.5 kN Hole diameter: 12 mm NIEDAX Model No:. 222 D Type: 222D










Item: 25 ST.
Sales unit: 50 pieces
Lieske Part No.: 669181

NIEDAX - Make: 222 H
Toggle bolt with ceiling hook, galvanized according to DIN 50961, blue passivated, for cavity walls and ceilings, including one washer according to DIN EN ISO 7089 and 1 Hex nut to DIN EN ISO 4035th The load values ​​include a safety factor of 4 The carrying capacity apply only with adequate bearing capacity of the ground.

Haleninnendurchm. 13mm

Threaded Rod: 4 M

Thread length: 70 mm

Total length L: 95 mm

Capacity Q: 0.1 kN

Hole diameter: 12 mm

NIEDAX model no. 222 H

Type: 222H
Item: 25 ST.
Sales unit: 50 pieces
Lieske Part No.: 220605

NIEDAX - Brand: 223 D toggle bolts threaded rod, galvanized to DIN 5 96
, Blue passivated, for cavity walls and ceilings, including 2 washers according to DIN EN ISO 7 89 and 2 hexagonal nuts according to DIN EN ISO 4 35 The load values ​​include a safety factor of 4 The carrying capacity apply only with adequate bearing capacity of the ground. Threaded rod: threaded rod 5 M Length:
F mm Load capacity:
, KN Hole diameter:
5 mm NIEDAX model no. 223 D Type: 223D item: 25 ST.
Sales unit: 50 pieces
Lieske Part No.: 866011

Ceiling outlet for web cable, with hook screw and dowel Ø 10 mm, can be used for 2-, 3-, and 4-core web cable, impact-resistant, halogen-free. To prevent plaster damage, the ceiling outlet for web cable must be used on every cable outlet, unless wall outlet boxes are required! Dimensions (approx. dimensions) B : 50 mm Material ceiling outlet/dowel : PS (polystyrene) Material hook screw : galvanized steel wire Material hexagon nut : brass, bare Color : white
Sales unit: 50 pieces
Lieske Part No.: 532821

Pipe and cable spacing clamp, with long fastening hole, for cables and electrical installation pipes in accordance with DIN EN 61386-21, for screwing on with push-through anchor DAM 6X... or screw anchor NSA 6X.../FKK-T30. Dimensions (approx. dimensions) W x L : 18 x 89 mm Long fastening hole : 6.4 x 10 mm for cable Ø : 47 - 55 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 50 Material : Steel, hot-dip galvanized in accordance with DIN EN ISO 1461 Screw material : Stainless steel, material no. 1.4301, 1.4303 Niedax model no. : 856 F
Sales unit: 20 pieces
Lieske Part No.: 466975

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 14 - 16 mm
Sales unit: 100 pieces
Lieske Part No.: 318813

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 22 - 26 mm
Sales unit: 100 pieces
Lieske Part No.: 318819

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 42 - 46 mm
Sales unit: 50 pieces
Lieske Part No.: 318823

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 3 cables for cable Ø: 14 - 16 mm
Sales unit: 100 pieces
Lieske Part No.: 318826

Cable support tray system for wall mounting or for fastening to rails. In accordance with VDE 0298-565-1 and VDE 0298-565-2, a maximum support distance of 0.8 m should not be exceeded. The load-bearing capacity information only applies if the support is sufficiently anchored to the supporting surface and if the surfaces of the vertical profile/anchor rails and the tray support rails in the clamping area are made of steel or galvanized steel. If the clamping area has a coat of paint, this must be removed, otherwise the load-bearing capacity is not given or guaranteed. Danger of slipping! 1. The cable support tray system in tray widths of 40, 50, 60, 70, 80 and 120 mm is available on request. Fastening material must be ordered separately, depending on the application. Dimensions (approx. dimensions) Tray W x L: 100 x 200 mm Number of support trays: 1 Load capacity F at B/2: 0.5 kN Rail H x W: 140 x 72 mm Rail holes: 11 x 16 mm Center hole spacing: 100 mm Number of holes: 2 Material: Steel, hot-dip galvanized according to DIN EN ISO 1461
Lieske Part No.: 1882702

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 3 cables for cable Ø: 26 - 28 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 318828

Universal U-clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 16 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 318762

U-clamp, for angle iron, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 82 - 90 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 25 pieces
Lieske Part No.: 318840

U-clamp, for angle iron, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 90 - 100 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 25 pieces
Lieske Part No.: 318841

U-clamp, for angle iron, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a max. leg length of 40 mm, counter trays (GWU/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 18 - 22 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 318842

Bügelschelle, für Winkeleisen, einschließlich Kunststoffdruckwanne mit UV-Schutz und Zapfenschraube M 6 mit Mehrfachantrieb, einsetzbar an gleich- und ungleichschenkligem Winkelstahl sowie U-Eisen. Gegenwannen GWU ... / GWS ... und Doppelwanne DW ... bitte gesondert bestellen. Verwendung für : gleich- und ungleichschenkligem Winkelstahl sowie U-Eisen mit einer Schenkellänge von max. 40 mm sowie einer Dicke von 4 - 6 mm Abmessungen (ca. Maße) Belegung übereinander : 2 Kabel für Kabel-Ø : 26 - 30 mm Werkstoff Bügel : Stahl, tauchfeuerverzinkt nach DIN EN ISO 1461 Werkstoff Druckwanne : Polypropylen (PP), halogenfrei, mit UV-Schutz, Farbton schwarz Werkstoff Wanneneinlage : Stahl, bandverzinkt nach DIN EN 10346
Sales unit: 100 pieces
Lieske Part No.: 2144067

Bügelschelle, für Winkeleisen, einschließlich Kunststoffdruckwanne mit UV-Schutz und Zapfenschraube M 6 mit Mehrfachantrieb, einsetzbar an gleich- und ungleichschenkligem Winkelstahl sowie U-Eisen. Gegenwannen GWU ... / GWS ... und Doppelwanne DW ... bitte gesondert bestellen. Verwendung für : gleich- und ungleichschenkligem Winkelstahl sowie U-Eisen mit einer Schenkellänge von max. 40 mm sowie einer Dicke von 4 - 6 mm Abmessungen (ca. Maße) Belegung übereinander : 2 Kabel für Kabel-Ø : 30 - 34 mm Werkstoff Bügel : Stahl, tauchfeuerverzinkt nach DIN EN ISO 1461 Werkstoff Druckwanne : Polypropylen (PP), halogenfrei, mit UV-Schutz, Farbton schwarz Werkstoff Wanneneinlage : Stahl, bandverzinkt nach DIN EN 10346
Sales unit: 100 pieces
Lieske Part No.: 2144068

U-clamp, for angle iron, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a max. leg length of 40 mm, counter trays (GWU...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 46 - 50 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 318844

U-clamp, with toothed clamp base, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 22 - 26 mm
Sales unit: 100 pieces
Lieske Part No.: 318845

U-clamp, with toothed clamp base, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 22 - 26 mm
Sales unit: 100 pieces
Lieske Part No.: 318847