Cable Ties, halogen-free
With internal teething bands in different
Dimensions, beam diameter of 294 mm,
Material: polyamide 6.6, color: natural black + (Stable weather)
Temperature range: -40 ° C
to +85 ° C,
Tape Length: 813
Bandwidth: 8.8
Color: natural

Type: T150L-N66-NA-Q1
Item: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 240977

UV-weather-resistant cable ties in a wide range of types. Made from 100% high-quality plastic, so easy to recycle. Internal teeth for a secure hold on the bundle. Easy to process by hand or with tools (process-reliable). Easy to loop through the angled end of the band. These internally toothed cable ties are made from UV-resistant polyamide 6.6 (PA66W) and are suitable for outdoor applications. Compared to conventional cable ties made from PA66, UV-stabilized cable ties withstand UV radiation for a much longer period of time. PA66W cable ties are therefore recommended for bundling and fastening cables, pipes and hoses outdoors.
Sales unit: 25 pieces
Lieske Part No.: 707132

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 500 pieces
Lieske Part No.: 1235609

UV-weather-resistant cable ties in a wide range of types. Made from 100% high-quality plastic, so easy to recycle. Internal teeth for a secure hold on the bundle. Easy to process by hand or with tools (process-reliable). Easy to loop through the angled end of the band. T-series cable ties have a wide range of uses. They are used wherever cables, lines or hoses need to be bundled and secured. The variety of materials used in the cable ties means that the T-series can be used universally in a wide range of applications.
Sales unit: 500 pieces
Lieske Part No.: 2056811

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 25 pieces
Lieske Part No.: 242703

Cable Ties, halogen-free
With internal teething bands in different
Dimensions, beam diameter of 294 mm,
Material: polyamide 6.6, color: natural black + (Stable weather)
Temperature range: -40 ° C
to +85 ° C,
Band Length: 1067
Bandwidth: 8.8
Color: natural

Type: T150XL-N66-NA-Q1
Item: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 166195

Cable Ties, halogen-free internal teething bands in different dimensions, beam diameter of 294 mm, material: polyamide 6.6, color: natural + black, (weather stable) Temperature range: -4 ° C to +85 ° C Tape length: 54 width: 8.8 color : Natural Type: T
5 M-N66-NA-Q
Item: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 879282

Cable Ties, halogen-free
With internal teething bands in different
Dimensions, beam diameter of 294 mm,
Material: polyamide 6.6, color: natural black + (Stable weather)
Temperature range: -40 ° C
to +85 ° C,
Tape Length: 540
Bandwidth: 8.8
Color: black

Type: T150M-W-BK-Q1
Item: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 401927

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 25 pieces
Lieske Part No.: 671078

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 250 pieces
Lieske Part No.: 1131165

Type: T250S-PA66-NA-C1

Sales unit: 20000 pieces
Lieske Part No.: 644923

Type: T250R-PA66-NA-Q1
Sales unit: 2000 pieces
Lieske Part No.: 676732

Type: T250R-W-BK-G1

Sales unit: 500 pieces
Lieske Part No.: 875365

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 500 pieces
Lieske Part No.: 1239198

Type: T250M-PA66-NA-Q1
Sales unit: 2000 pieces
Lieske Part No.: 180541

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 1000 pieces
Lieske Part No.: 999621

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 25 pieces
Lieske Part No.: 2054896

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 500 pieces
Lieske Part No.: 412231

Type: TELS POM BK 1 PA

Lieske Part No.: 352746

Three-part system solution made of robust polyacetal (POM). Endless band, spacers and locking heads with stainless steel tongues are available. Very secure fastening. Good aging and UV resistance. Suitable for almost any bundle diameter. With potential for inventory reduction. The robust cable ties of the EL-TY series are suitable for tying large diameters such as pipes, thick cables or lines. Originally, the cable ties were designed primarily to secure overhead and ceiling cables. Today, the areas of application are much more extensive: from the construction sector to the chemical industry and telecommunications, right up to the fastening of signs in road traffic. Separate spacers allow a defined gap when two cables are routed in parallel.
Sales unit: 25 pieces
Lieske Part No.: 1581134

Large selection of materials and sizes. Internal teeth for a secure hold on the bundle. High loop holding force combined with low looping forces. Easy to process by hand or with a tool. For bundling and securing cables, pipes and hoses. The LK series is similar to the T series, but offers intermediate sizes to meet individual customer needs.
Sales unit: 100 pieces
Lieske Part No.: 1314994

Large selection of materials and sizes. Internal teeth for a secure hold on the bundle. High loop holding force combined with low looping forces. Easy to process by hand or with a tool. The LK series is suitable for bundling and fastening cables, lines, hoses or other elements. These cable ties are used across industries in a wide variety of applications. The LK series offers intermediate sizes to the T series in order to cover every individual customer requirement.
Sales unit: 100 pieces
Lieske Part No.: 1231925

Large selection of materials and sizes. Internal teeth for a secure hold on the bundle. High loop holding force combined with low looping forces. Easy to process by hand or with a tool. The LK series is suitable for bundling and fastening cables, lines, hoses or other elements. These cable ties are used across industries in a wide variety of applications. The LK series offers intermediate sizes to the T series in order to cover every individual customer requirement.
Sales unit: 200 pieces
Lieske Part No.: 779370

Type: LK5-HIR (S)-L1-BK Package: 600 ST.
Sales unit: 600 pieces
Lieske Part No.: 445954

Large selection of materials and sizes. Internal teeth for a secure hold on the bundle. High loop holding force combined with low looping forces. Easy to process by hand or with a tool. The LK series is suitable for bundling and fastening cables, lines, hoses or other elements. These cable ties are used across industries in a wide variety of applications. The LK series offers intermediate sizes to the T series in order to cover every individual customer requirement.
Sales unit: 50 pieces
Lieske Part No.: 816611

Cable Ties, halogen-free
internal teething bands in different
dimensions, beam diameter of 294 mm,
material: polyamide 6.6, color: natural + black (weather stable)
Temperature range: -40 ° C
to +85 ° C,
band length: 540
width: 13.0
Color: natural

Type: LK5-N66-NA-L1
Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 586452

Type: LK5-HS-NA-L1

Sales unit: 50 pieces
Lieske Part No.: 328376

Cable Ties, halogen-free
With internal teething bands in different
Dimensions, beam diameter of 294 mm,
Material: polyamide 6.6, color: natural black + (Stable weather)
Temperature range: -40 ° C
to +85 ° C,
Band length: 540
width: 13.1
Color: black

Type: LK5-W-BK-L1
Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 397586

Releasable and reusable cable tie. Available in black and natural. Suitable for indoor or outdoor applications depending on the material. PA66HS for use in high ambient temperatures. Easy to open again thanks to the extended tongue design. Internally toothed cable tie. Available in various lengths. These releasable and reusable cable ties are used in areas where frequent changes to the bundle have to be made. This includes, among other things, a temporary installation for test purposes or the subsequent addition or removal of elements. These cable ties are most commonly used in stage construction, for cable routing at outdoor events or for prototype work. To open the cable tie, the extended tongue is simply pushed down with a finger.
Sales unit: 50 pieces
Lieske Part No.: 999767

Releasable and reusable cable tie. Available in black and natural. Suitable for indoor or outdoor applications depending on the material. PA66HS for use in high ambient temperatures. Easy to open again thanks to the extended tongue design. Internally toothed cable tie. Available in various lengths. These releasable and reusable cable ties are used in areas where frequent changes to the bundle have to be made. This includes, among other things, a temporary installation for test purposes or the subsequent addition or removal of elements. These cable ties are most commonly used in stage construction, for cable routing at outdoor events or for prototype work. To open the cable tie, the extended tongue is simply pushed down with a finger.
Sales unit: 50 pieces
Lieske Part No.: 216238

Type: RLT150 PA66HS NA 50 ST unit sale: 13500 ST.
Sales unit: 13500 pieces
Lieske Part No.: 240997

Releasable and reusable cable tie. Available in black and natural. Suitable for indoor or outdoor applications depending on the material. PA66HS for use in high ambient temperatures. Easy to open again thanks to the extended tongue design. Internally toothed cable tie. Available in various lengths. These releasable and reusable cable ties are used in areas where frequent changes to the bundle have to be made. This includes, among other things, a temporary installation for test purposes or the subsequent addition or removal of elements. These cable ties are most commonly used in stage construction, for cable routing at outdoor events or for prototype work. To open the cable tie, the extended tongue is simply pushed down with a finger.
Sales unit: 50 pieces
Lieske Part No.: 485420

Releasable and reusable cable tie. Available in black and natural. Suitable for indoor or outdoor applications depending on the material. PA66HS for use in high ambient temperatures. Easy to open again thanks to the extended tongue design. Internally toothed cable tie. Available in various lengths. These releasable and reusable cable ties are used in areas where frequent changes to the bundle have to be made. This includes, among other things, a temporary installation for test purposes or the subsequent addition or removal of elements. These cable ties are most commonly used in stage construction, for cable routing at outdoor events or for prototype work. To open the cable tie, the extended tongue is simply pushed down with a finger.
Sales unit: 100 pieces
Lieske Part No.: 456199

Releasable and reusable cable tie. Available in black and natural. Suitable for indoor or outdoor applications depending on the material. PA66HS for use in high ambient temperatures. Easy to open again thanks to the extended tongue design. Internally toothed cable tie. Available in various lengths. These releasable and reusable cable ties are used in areas where frequent changes to the bundle have to be made. This includes, among other things, a temporary installation for test purposes or the subsequent addition or removal of elements. These cable ties are most commonly used in stage construction, for cable routing at outdoor events or for prototype work. To open the cable tie, the extended tongue is simply pushed down with a finger.
Sales unit: 16000 pieces
Lieske Part No.: 1131164

Type: IT18R-PA66-NA-C1 item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 860665

IT cable ties with label
Ideal to make a mark even after installation.
cables on trees as well as on cable bundles or other
objects.

Material: Polyamide
Color: Natural
Dimensions: (L x W) 111 x 2.5 mm
Dimensions (L1 x W1) 21 x 9 mm Type: IT18FL-N66-NA-C1


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 192936

Identification cable ties made of polyamide 6.6. For easy identification and simultaneous bundling. Direct labeling on site or after processing (pins T82S-BK/T82R-RD). Large selection of matching labels for thermal transfer printing also available. These cable ties are suitable for time-saving labeling during and after the assembly of cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 218823

Identification cable ties made of polyamide 6.6. For easy identification and simultaneous bundling. Direct labeling on site or after processing (pins T82S-BK/T82R-RD). Large selection of suitable labels for thermal transfer printing also available. These cable ties are suitable for time-saving labeling during and after the assembly of cable harnesses.
Sales unit: 50 pieces
Lieske Part No.: 766906

IT cable ties with label Ideal to make a mark even after installation. Trees as well as on cable on cable bundles or other objects. Material: Polyamide Colour: Natural Dimensions: (L x W) 2 3 x 4,7 mm Dimensions (L
x W
) 29 x 24 mm Type: it5 RD-N66-NA-L
Quantity: 5 PCS.
Sales unit: 50 pieces
Lieske Part No.: 882656

Identification cable ties made of polyamide 6.6. For easy identification and simultaneous bundling. Direct labeling on site or after processing (pins T82S-BK/T82R-RD). Large selection of matching labels for thermal transfer printing also available. These cable ties are suitable for time-saving labeling during and after the assembly of cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 434115

Type: T5 SSL5 item:
ST.
Sales unit: 7000 pieces
Lieske Part No.: 891203

Easy installation, no tools required. Expansion anchors lock into place with an audible and tangible click. High pull-out and holding force, even when subjected to loads from different directions. Plates protect against dirt and dust penetration. KSFT variants with rounded expansion anchors for minimized installation height. The T50SST5 variant offers support against axial displacement. Fastening ties with expansion anchors are used to securely bundle and fasten cable harnesses and hoses in control cabinet construction, the automotive industry and the aerospace industry. This fastening solution is used to secure cable harnesses. We offer a variety of plate thicknesses and hole sizes for every application.
Sales unit: 500 pieces
Lieske Part No.: 1232044

Solution for simultaneous bundling and fastening. Optimal combination of material and design. Wide variety of fastening elements for different applications. Removable and reusable. Including bundling and fastening of cable harnesses and hoses in control cabinet construction, in the automotive industry and the aerospace industry.
Sales unit: 3000 pieces
Lieske Part No.: 1580427

Easy to install, no tools required. The head of the one-piece takes up a defined position when installed. Expansion anchors lock into place with an audible and tangible click. Wings enable a safe and secure hold in confined spaces. The tie was developed primarily for fastening cable harnesses, pipes and hoses in the automotive industry. Due to its simple and user-friendly application, the fastening tie is also used in other industries, such as aviation, switchgear and the manufacture of household appliances.
Sales unit: 100 pieces
Lieske Part No.: 679567

Easy installation, no tools required. Fastening tie with expansion anchor without wings. Expansion anchors lock into place with an audible and tangible click. The head of the divider assumes a defined position when installed. This fastening tie is particularly suitable for installation in tight spaces due to its very slim geometry.
Sales unit: 500 pieces
Lieske Part No.: 1580389

Easy installation, no tools required. Expansion anchors lock into place with an audible and tangible click. High pull-out and holding force, even when subjected to loads from different directions. Plates protect against dirt and dust penetration. KSFT variants with rounded expansion anchors for minimized installation height. The T50SST5 variant offers support against axial displacement. Fastening ties with expansion anchors are used to securely bundle and fasten cable harnesses and hoses in control cabinet construction, the automotive industry and the aerospace industry. This fastening solution is used to secure cable harnesses. We offer a variety of plate thicknesses and hole sizes for every application.
Sales unit: 100 pieces
Lieske Part No.: 521259

Type: T50RFT7-HS-BK-D1

Sales unit: 500 pieces
Lieske Part No.: 897034

2-teiliger Kabelbinder mit Lamellenfuß, vormontiert. Der Kopf des Binders kann in die optimale Bündelposition gebracht werden. Einfache Montage, werkzeugfrei. Schützt vor eindringendem Schmutz und Staub durch Teller. Diverse Blechdicken finden Verwendung mit einem einzigen Lamellen-Fußteil. Auch für Sacklochbohrungen mit Gewinde. Diese Befestigungsbinder finden überall dort Anwendung, wo rationelles Arbeiten verbunden mit hohen Haltekräften gefordert ist. Sie sind z. B. im Schaltschrank- und Fahrzeugbau einsetzbar.
Sales unit: 500 pieces
Lieske Part No.: 127814

Type: T120R-V0-WH-C1

Sales unit: 100 pieces
Lieske Part No.: 885365

MLT series cable ties made of stainless steel SS316 (V4A). Simple and effective locking system, partially removable. Plastic coating protects against contact corrosion. MLT series metal cable ties are equipped with a folding lock. Bending the webs creates a very firm hold on the bundled goods. Even rigid bundles can be easily fixed with MLT cable ties. Metal cable ties are the first choice for all applications that have increased requirements for holding force, temperature and/or chemical resistance. In the event of a fire, cables, lines or pipes are held securely in place. The use of metal cable ties prevents emergency exits from being blocked by falling cables.
Sales unit: 1000 pieces
Lieske Part No.: 1133531