Self-adhesive mounting base. Synthetic rubber adhesive for universal applications. Largest possible adhesive surface. The cable tie can be looped in from four sides for quick and flexible installation. The main areas of application for the self-adhesive MB base are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening, but screw fastening is not possible.
Sales unit: 100 pieces
Lieske Part No.: 694767

Self-adhesive base, halogen-free for cable ties (T
8R to T
5 R), for threading of 4 pages tie width from 3.6 to 7.8 mm Material: Nylon 6.6 Color: natural temperature range: -4 ° C to +85 ° C Cable Ties max. Width: 5.4 mm Dimensions (L x W): 28 x 28 Type: MB4A-N66-NA-C

ST.
Sales unit: 100 pieces
Lieske Part No.: 897357

Screwable mounting base. Easy installation using standard screws. Particularly suitable for secure hold in the event of vibrations. The cable tie can be looped in from four sides for quick and flexible installation. The main areas of application are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening.
Sales unit: 100 pieces
Lieske Part No.: 342055

Self-adhesive mounting base. Synthetic rubber adhesive for universal applications. Largest possible adhesive surface. The cable tie can be looped in from four sides for quick and flexible installation. The main areas of application for the self-adhesive MB base are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening, but screw fastening is not possible.
Sales unit: 100 pieces
Lieske Part No.: 818734

Parallel guidance of the bundles prevents wear and abrasion. Design enables good form-fit to the bundled goods. Can be combined with heavy-duty cable ties. Easy maintenance of the bundle is guaranteed. Made of impact-modified, heat-stabilized material. The saddle mounts are used in heavy-duty applications. They are installed between two bundles to separate them safely. Wear due to friction is prevented. The special profile allows the bundle to fit tightly, regardless of whether the bundle diameter is large or small. The heavy-duty holders of the S2 series ensure orderly cable management in a variety of applications in rail vehicle construction, the commercial vehicle and agricultural industries, and in shipbuilding.
Sales unit: 2000 pieces
Lieske Part No.: 2058130

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 1131276

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 1131206

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Lieske Part No.: 1426086

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 1131124

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 15000 pieces
Lieske Part No.: 1131615

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 5000 pieces
Lieske Part No.: 1131362

Gebogenes Design für zusätzlichen Kabelschutz. Einfache Installation mittels Schraube oder Bolzen. Hohe Sicherheit, vor allem in Bereichen mit starker Vibration. Verschiedene Größen und Materialien verfügbar. Besonders geeignet sind die CTM-Befestigungssockel zur Befestigung von Leitungsbündeln, Kabelsträngen oder Kabeln mit großem Durchmesser.
Sales unit: 5000 pieces
Lieske Part No.: 172127

Type: CTM3-PA66-WH-C1 item: 5000 ST.
Sales unit: 7000 pieces
Lieske Part No.: 565588

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 10000 pieces
Lieske Part No.: 1131361

These bases are used wherever cables and wires with larger diameters need to be attached, e.g. B. in agricultural machinery or truck construction. They can be combined with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 1131360

Compact, flat design. Suitable for applications with minimal space. Can be combined with cable ties up to 5 mm wide. 4-way looping direction for use in line or at a 90° angle. Due to their small dimensions, the robust CTAM bases with 4-way cable tie holder are particularly suitable for limited space, e.g. in telecommunications, in control cabinets and in equipment or plant construction.
Sales unit: 100 pieces
Lieske Part No.: 2048842

Compact, flat design. Suitable for applications with minimal space. Can be combined with cable ties up to 5 mm wide. 4-way looping direction for use in line or at a 90° angle. Due to their small dimensions, the robust CTAM bases with 4-way cable tie holder are particularly suitable for limited space, e.g. in telecommunications, in control cabinets and in equipment or plant construction.
Sales unit: 100 pieces
Lieske Part No.: 1596655

Type: CTAM2-PA66-NA-C1 item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 297584

For applications with tight installation situations. Secure fastening using the expansion anchor. The TM1SF fastening element is used to hold a cable tie in tight spaces. It is used wherever a simple and quick fastening is required.
Sales unit: 100 pieces
Lieske Part No.: 350796

Screwable mounting bases. Bundled goods to the side for screwing. Compact design. Can be combined with cable ties up to 4.6 mm wide. Secure hold even with larger bundle diameters. Due to the lateral guidance of the cable and line bundle, these bases are ideal for installation in tight spaces, especially for fastening in corners and on edges, as the hole can be offset by a few millimeters.
Sales unit: 500 pieces
Lieske Part No.: 970743

Screwable mounting bases. Bundled goods to the side for screwing. Compact design. Can be combined with cable ties up to 4.6 mm wide. Secure hold even with larger bundle diameters. Due to the lateral routing of the cable and line bundle, these bases are ideal for installation in tight spaces. Particularly for fastening in corners and on edges, as the hole can be offset by a few millimeters.
Sales unit: 500 pieces
Lieske Part No.: 567364

Screwable mounting bases. Bundled goods to the side for screwing. Compact design. Can be combined with cable ties up to 4.6 mm wide. Secure hold even with larger bundle diameters. Due to the lateral routing of the cable and line bundle, these bases are ideal for installation in tight spaces. Particularly for fastening in corners and on edges, as the hole can be offset by a few millimeters.
Sales unit: 500 pieces
Lieske Part No.: 426612

For single or multiple cables. Simply place cables in the square holder. Lockable to prevent accidental removal. Expansion anchors for easy and safe installation. The WPC holders are used in many industrial areas, including in the frame profiles of control cabinets or inside household appliances, where they can be installed without losing space.
Lieske Part No.: 2054886

For single or multiple cables. Simply place cables in the square holder. Lockable to prevent accidental removal. Expansion anchors for easy and safe installation. The WPC holders are used in many industrial areas, including in the frame profiles of control cabinets or inside household appliances, where they can be installed without losing space.
Sales unit: 500 pieces
Lieske Part No.: 2054884

For single or multiple cables. Simply place cables in the square holder. Lockable to prevent accidental removal. Expansion anchors for easy and safe installation. The WPC holders are used in many industrial areas, including in the frame profiles of control cabinets or inside household appliances, where they can be installed without losing space.
Sales unit: 500 pieces
Lieske Part No.: 818186

For single or multiple cables. Simply place cables in the square holder. Lockable to prevent accidental removal. Expansion anchors for easy and safe installation. The WPC holders are used in many industrial areas, including in the frame profiles of control cabinets or inside household appliances, where they can be installed without losing space.
Sales unit: 500 pieces
Lieske Part No.: 2054885

Ideal for routing cable bundles in parallel. For cable ties up to 9 mm wide. The LOK04 ring offers an easy way to bundle cables and lines and route them in parallel at the same time.
Sales unit: 20000 pieces
Lieske Part No.: 2058193

Type: LOK01B PA6HIR BK 100 ST

Sales unit: 100 pieces
Lieske Part No.: 478333

Type: TY5K2 PA66HS NA 100 ST
Lieske Part No.: 586606

Time-saving fastening solution. Base consists of two parts. Simply push into the fastening hole. Can be combined with cable ties of different widths. The TY5 wedge bases are used wherever efficient fastening and high fastening security are required, even under vibrations. The two-part wedge remains firmly anchored in the drill hole after insertion.
Sales unit: 100 pieces
Lieske Part No.: 940230

Type: TY5K3 PA66W BK 100 ST
Sales unit: 2000 pieces
Lieske Part No.: 646455

The head of the divider takes up a defined position when assembled. Easy assembly, no tools required. Bundled goods run at a defined distance from the surface directly above the welding stud. Primarily developed for the automotive industry, these welding stud holders are also used in all other areas where cables and lines need to be safely guided using welding or threaded studs.
Sales unit: 500 pieces
Lieske Part No.: 455249

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1-3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip series is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2058132

Pre-assembled two-part fastening ties with EdgeClip. The head of the cable tie can still be moved after fastening. For the smallest bundle diameters from 1 mm. For edges of 3 - 6 mm. The combination of cable ties and EdgeClip is suitable wherever holes cannot be drilled or where bonding fails due to high temperatures. These solutions are widely used for fastening and bundling cables, lines and pipes, e.g. in the automotive, construction and electrical industries as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 325608

Type: T50ROSEC24 PA66HS,PA66HIRHS BK 500 ST

Sales unit: 500 pieces
Lieske Part No.: 842027

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1-3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip series is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 446943

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1-3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip series is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 1216592

Quantity: 4000 ST.
Sales unit: 500 pieces
Lieske Part No.: 438109

Type: T50SOSEC21 PA66HS, PA66HIRHS BK 500 ST Package: 4000 ST.
Sales unit: 500 pieces
Lieske Part No.: 127229

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1 - 3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, primarily in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2055564

Type: T50ROSEC20-MC5-BK-D1

Sales unit: 500 pieces
Lieske Part No.: 466192

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with threads. The tie was developed primarily for fastening cable harnesses in the automotive industry. Due to its simple and user-friendly application, the fastening tie is also used in other industries, e.g. in aviation, switchgear and in the manufacture of household appliances.
Sales unit: 500 pieces
Lieske Part No.: 2058135

2-part cable tie with EdgeClip, pre-assembled. Easy assembly, no tools required. The head of the tie can be moved to the optimal bundling position. For edges of 1 - 2.5 mm or 1 - 3 mm. Rotatable cable tie for flexible cable routing. This combination of cable tie and Edge Clip is suitable wherever holes cannot be drilled or where an adhesive fails due to high temperatures. These solutions are widely used for fastening and bundling cables, lines and pipes, e.g. in the automotive, construction and electrical industries as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2048215

2-teiliger Kabelbinder mit Lamellenfuß, vormontiert. Der Kopf des Binders kann in die optimale Bündelposition gebracht werden. Einfache Montage, werkzeugfrei. Schützt vor eindringendem Schmutz und Staub durch Teller. Diverse Blechdicken finden Verwendung mit einem einzigen Lamellen-Fußteil. Auch für Sacklochbohrungen mit Gewinde. Diese Befestigungsbinder finden überall dort Anwendung, wo rationelles Arbeiten verbunden mit hohen Haltekräften gefordert ist. Sie sind z.B. im Schaltschrank- und Fahrzeugbau einsetzbar.
Sales unit: 100 pieces
Lieske Part No.: 705710

2-teiliger Kabelbinder mit Lamellenfuß, vormontiert. Der Kopf des Binders kann in die optimale Bündelposition gebracht werden. Einfache Montage, werkzeugfrei. Schützt vor eindringendem Schmutz und Staub durch Teller. Diverse Blechdicken finden Verwendung mit einem einzigen Lamellen-Fußteil. Auch für Sacklochbohrungen mit Gewinde. Diese Befestigungsbinder finden überall dort Anwendung, wo rationelles Arbeiten verbunden mit hohen Haltekräften gefordert ist. Sie sind z.B. im Schaltschrank- und Fahrzeugbau einsetzbar.
Sales unit: 4000 pieces
Lieske Part No.: 705708

2-teiliger Kabelbinder mit Lamellenfuß, vormontiert. Der Kopf des Binders kann in die optimale Bündelposition gebracht werden. Einfache Montage, werkzeugfrei. Schützt vor eindringendem Schmutz und Staub durch Teller. Diverse Blechdicken finden Verwendung mit einem einzigen Lamellen-Fußteil. Auch für Sacklochbohrungen mit Gewinde. Diese Befestigungsbinder finden überall dort Anwendung, wo rationelles Arbeiten verbunden mit hohen Haltekräften gefordert ist. Sie sind z.B. im Schaltschrank- und Fahrzeugbau einsetzbar.
Sales unit: 500 pieces
Lieske Part No.: 705698

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 1216590

2-teiliger Kabelbinder mit Schweißbolzenaufnahme, vormontiert. Der Kopf des Binders kann in die optimale Bündelposition gebracht werden. Einfache Montage, werkzeugfrei. Soft-push-Design für einfache Handmontage. SB-Typen für 5 mm Schweißbolzen und M5-Gewindebolzen. SBH-Varianten mit Teller für zusätzliche Befestigung von dämmenden Werkstoffen. Ovale Schweißbolzenhülse für horizontalen Toleranzausgleich. GBS8C für 8 mm Schweißbolzen zur Parallelführung. Die Serie SBH5 wird hauptsächlich im Automobilbereich eingesetzt. Die Serien SB5 und SBS5 sind für die Bündelung und Befestigung von Kabelbäumen und Schläuchen im Schaltschrankbau, der Automobil- und Baumaschinenindustrie geeignet.
Sales unit: 500 pieces
Lieske Part No.: 1570498

2-teiliger Kabelbinder mit EdgeClip, vormontiert. Der Kopf des Binders kann in optimale Bündelposition gebracht werden. Typ EC9, EC10, EC21 und EC22 für Bündeldurchmesser ab 1 mm. Für Kanten von 1 - 3 mm. Elemente aus der EdgeClip-Serie sind eine sehr gute Alternative überall dort, wo Lochbohrungen und Schweißbolzen nicht realisierbar und Kleber aufgrund höherer Temperaturen nicht einsetzbar sind. Anwendung findet die EdgeClip-Familie zur Bündelung und Befestigung von Kabelbäumen und Schläuchen überwiegend in der Automobil-, Bau- und Elektroindustrie sowie in der Kabelbaumfertigung.
Sales unit: 500 pieces
Lieske Part No.: 705706

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 2058139