Can be installed in the construction profile in one second with a simple twisting movement. Can be installed and removed several times. For cable ties up to 8 mm wide. The bundled goods are centered by the rounded contour of the bundle holder. Cable tie holder for cable ties T50 - T120. The bundled goods can be guided lengthways or crossways to the profile. For construction profiles from all well-known manufacturers with the dimensions: 20 x 20, 30 x 30 mm 40 x 40 mm and 45 x 45 mm. Since no mounting hole is required, the ACFM is very easy to install and handle. The ACFM4W8PT2.2 is specially designed for the Bosch Rexroth profile with a groove width of 8 mm and external dimensions of 30 mm.
Sales unit: 25 pieces
Lieske Part No.: 1056343

Can be installed in the construction profile in one second with a simple twisting movement. Can be installed and removed several times. For cable ties up to 8 mm wide. The bundled goods are centered by the rounded contour of the bundle holder. Cable tie holder for cable ties T50 - T120. The bundled goods can be guided lengthways or crossways to the profile. For construction profiles from all well-known manufacturers with the dimensions: 20 x 20 mm, 30 x 30 mm, 40 x 40 mm, 45 x 45 mm and 50 x 50 mm. Because no mounting hole is required, the ACFM is very easy to install and handle. The ACFM8W6PT2.75 is specially designed for the ITEM profile with a groove width of 6 mm and external dimensions of 30 mm.
Sales unit: 25 pieces
Lieske Part No.: 2057943

Can be installed in the construction profile in one second with a simple twisting movement. Can be installed and removed several times. For cable ties up to 8 mm wide. The bundled goods are centered by the rounded contour of the bundle holder. Cable tie holder for cable ties T50 - T120. The bundled goods can be guided lengthways and crossways to the profile. For construction profiles from all well-known manufacturers with the dimensions: 20 x 20, 30 x 30 mm 40 x 40 mm and 45 x 45 mm. Since no mounting hole is required, the ACFM is very easy to install and handle. The ACFM1W13PT3.5 is specially designed for the Ziegler profile with a groove width of 13 mm and external dimensions of 45 mm.
Sales unit: 25 pieces
Lieske Part No.: 1373825

Flexibler Sockel für abgerundete und gewinkelte Oberflächen. FMB-Halterungen mit einheitlichem Acrylklebstoffsystem. Größere Designfreiheit, Gewichtsreduzierung und Prozesskostenoptimierung. Kleber mit hoher Zug- und Scherfestigkeit. Innovative Befestigungslösung für mit hoch und niederenergetischen Oberflächen. Schutzfolie mit Überstand für sehr einfaches Abziehen. Kabelbinder kann von vier Seiten eingeschlauft werden. Schnelle, einfache und flexible Montage. FlexTack Sockel können auch für hochenergetische Oberflächen wie Metall oder Glas verwendet werden. FlexTack Sockel sind eine innovative Befestigungslösung insbesondere für gebogene und abgewinkelte Oberflächen. Der verwendete Acrylat-Klebstoff ist für hoch- und niederenergetische Oberflächen geeignet. Die flexiblen Klebesockel bieten eine Alternative überall dort, wo Schraubbefestigungen nicht möglich sind und können, bedingt durch die Produkteigenschaften, für eine Vielzahl von Anwendungen eingesetzt werden. Dazu gehören unter anderem pulverlackbeschichtete oder lackierte Oberflächen, Metalloberflächen sowie Kunststoffverkleidungen in diversen Bereichen wie Schaltschränken, Schienenfahrzeug-, Flugzeug-, Fahrzeug- und Landmaschinenbau. Verkaufseinheit: 10000 ST.
Sales unit: 100 pieces
Lieske Part No.: 2145394

Can be used as a screw or adhesive base. Perfect system solution in combination with cable ties. Special design keeps the cable tie in position. Assembly processes are simplified. Very good initial adhesion that increases over time. Innovative fastening solution for high and low energy surfaces. Q-Mount fastening bases in combination with Q-tie cable ties ensure reliable and permanent fastening. With the special SolidTack adhesive, the Q-Mount is an innovative fastening solution for low energy surfaces and where drilling holes is not desired or possible. The adhesive bases are suitable for a wide range of applications on painted surfaces, plastics or metals. The base is used in areas such as control cabinet construction, rail vehicle construction, aerospace, automobiles and agricultural machinery.
Sales unit: 10 pieces
Lieske Part No.: 677341

Verkaufseinheit: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 2146043

für ein oder zwei Solarleitungen. sicherer Halt der Leitungen. einfacher Tausch von Leitungen im Wartungsfall. für Kanten 1,0 - 3,0 mm. Unser EC1-3SPDHC6-7 ist perfekt für die Verlegung von Solarleitungen. Der Artikel kann durch einfaches Aufstecken per Hand auf Solarmodule appliziert werden. Danach können bis zu zwei Leitungen durch einfaches Eindrücken in den Halter sicher geführt werden.
Sales unit: 100 pieces
Lieske Part No.: 2094433

For parallel guidance of two bundles that can be rotated 360° relative to each other. The H-design ensures a good form fit to the bundled goods. The head of the tie can be brought into the optimal bundle position. For cable ties up to 12.7 mm wide. Also for subsequent assembly of bundled goods. These elements were developed for the automotive and truck industries, but can be used in any area where a connection of two bundles and a defined distance are required.
Sales unit: 50 pieces
Lieske Part No.: 301756

Design ermöglicht sicheren Formschluss zum Bündelgut. Konventionelle Kabelschellen können ersetzt werden. Bevorratung verschiedener Schellengrößen nicht mehr notwendig. Für Schwerlastkabelbinder bis 13,5-mm-Breite. Wartung der Bündel durch einfachen Kabelbindertausch möglich. Entwickelt für die Automobil- bzw. LKW-Industrie werden Heavy Duty Mounts (HDM) überall dort eingesetzt, wo eine robuste, sichere und dauerhafte Bündelung gewünscht ist. Ebenfalls gehören der Schienenfahrzeugbau sowie die Verteidigungs- und Agrarindustrie zu den Fokusmärkten. Verkaufseinheit: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 705700

Type: QM20-PA66-NA-C1 item: 1 ST.
Sales unit: 100 pieces
Lieske Part No.: 136780

Type: QM30-PA66-NA-C1 item: 1 ST.
Sales unit: 100 pieces
Lieske Part No.: 754057

Sales Unit: 1 ST.
Sales unit: 50 pieces
Lieske Part No.: 948925

Type: QM20A-PA66-NA-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 613847

Type: QM30A-PA66-NA-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 526419

Type: QM40A-PA66-NA-L1
Sales unit: 50 pc
Sales unit: 50 pieces
Lieske Part No.: 571840

Sales Unit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 163272

Special shape of the cable tie holder keeps the Q-tie cable tie in place during installation. Fastened with two screws. Cable tie can be looped in from four sides. Extra quick and flexible installation in combination with Q-tie cable ties. Q-Mount mounting bases are ideal for holding our innovative Q-tie cable ties. They are suitable for all applications where reliable and permanent fixation is required.
Sales unit: 100 pieces
Lieske Part No.: 2057040

Type: QM20A-PA66-BK-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 347744

Type: QM30A-PA66-BK-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 855349

Type: QM40A-PA66-BK-L1
Sales unit: 50 pc
Sales unit: 50 pieces
Lieske Part No.: 368128

Type: CTQM5-PA66-NA-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 160528

Type: CTQM5-PA66-BK-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 478582

Type: TY3G1S PA66W BK 100 ST
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 717673

Self-adhesive base, halogen-free cable for all bands up to 4 mm range. The curved plate provides good support for larger cable bundles Material: Polyamide 6.6 Colour: natural temperature range: -4 ° C to +85 ° C cable tie Max. Width: 4 mm Dimensions (L x W): 2 x
4 Type: TY3G
S-N66-NA-C
Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 530902

Type: TY8G1S PA66W BK ST 100 Quantity: 1 ea.
Lieske Part No.: 668160

Self-adhesive base, halogen-free
Universally applicable.For cable tie
8 mm width, the curved plate provides good
support for larger cable bundles
Material: Polyamide 6.6
Color: natural
Temperature range: -40 ° C to +85 ° C
max cable ties. Width: 8.0 mm
Dimensions (L x W): 32 x 25 Type: TY8G1S-N66-NA-C1


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 148605

Self-adhesive base, halogen-free for stranded wire, cables, wires, etc., for stranded wire, cables, wires, etc. from 3 to
8 mm in diameter. Material: Polyamide 6.6 Colour: natural temperature range: -4 ° C to +85 ° C Dimensions (L x W):
3 x
3 Type: RA3-N66-NA-C
Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 834604

Self-adhesive base, halogen-free
for stranded wire, cables, wires, etc.
for stranded wire, cables, wires, etc. 3-18 mm
Diameter.
Material: polyamide 6.6
Color: natural
Temperature range: -40 ° C to +85 ° C

Dimensions (L x W): 19 X 19

Type: RA6-N66-NA-C1
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 273526

Self-adhesive base, halogen-free for stranded wire, cables, wires, etc., for stranded wire, cables, wires, etc. from 3 to
8 mm in diameter. Material: Polyamide 6.6 Colour: natural temperature range: -4 ° C to +85 ° C Dimensions (L x W):
9 x
9 Type: RA9-N66-NA-C
Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 985920

Self-adhesive base, halogen-free
for stranded wire, cables, wires, etc.
for stranded wire, cables, wires, etc. 3-18 mm
Diameter.
Material: polyamide 6.6
Color: natural
Temperature range: -40 ° C to +85 ° C Dimensions (L x W): 25 X 25 Type: RA13-N66-NA-C1




Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 638861

Self-adhesive base, halogen-free for stranded wire, cables, wires, etc., for stranded wire, cables, wires, etc. from 3 to
8 mm diameter. Material: Polyamide 6.6 Colour: natural temperature range: -4 ° C to +85 ° C Dimensions (L x W): 28 X 28 Type: RA
8-N66-NA-C
Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 546800

Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 843727

Type: RB5 PA66 NA 100 ST
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 383433

Type: RB8-N66-NA-H1
Sales unit: 5000 pc
Sales unit: 5000 pieces
Lieske Part No.: 825153

The HellermannTyton ribbon cable holders are used for securing and guiding of flat cables and are available in four different sizes. Optionally, the FKH are secured with high-quality acrylic adhesive or M3 screws. Thanks to the practical clip fastener allows the holder quickly and easily open and close. The ribbon cable holder is made of high-quality, impact-modified polyamide 6.6 and hence can be used even in very dry areas. The rounded edges and extremely soft wings any flat cable is guided and held gently. Type: A FKH3 PA66HIR BK
ST sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 830204

One-piece mounting base for ribbon cables and round cables. Raised mounting surface ensures proper bonding. Quick and easy installation. Can be opened and reused. Cables are gently attached using soft holders. FKH bases are used to attach ribbon cables in information electronics, in consumer electronics or to connect sensors. Since each installation scenario is individual, FKH bases are available in different dimensions and can be supplied as self-adhesive and/or screwable versions.
Sales unit: 100 pieces
Lieske Part No.: 304235

One-piece mounting base for ribbon cables. Raised mounting surface ensures proper bonding. Quick and easy installation. Can be opened and reused. Cables are gently secured using soft holders. FKH bases are used to securely guide ribbon cables. These mounting bases are usually used in information and entertainment electronics or they are used to attach and guide sensor connections. To cover every individual application, FKH bases are available in different sizes. They can be supplied as self-adhesive or screwable versions.
Sales unit: 2000 pieces
Lieske Part No.: 2054871

One-piece mounting base for ribbon cables. Raised mounting surface ensures proper bonding. Quick and easy installation. Can be opened and reused. Cables are gently secured using soft holders. FKH bases are used to securely guide ribbon cables. These mounting bases are usually used in information and entertainment electronics or they are used to attach and guide sensor connections. To cover every individual application, FKH bases are available in different sizes. They can be supplied as self-adhesive or screwable versions.
Sales unit: 100 pieces
Lieske Part No.: 1580407

One-piece mounting base for ribbon cables. Raised mounting surface ensures proper bonding. Quick and easy installation. Can be opened and reused. Cables are gently secured using soft holders. FKH bases are used to securely guide ribbon cables. These mounting bases are usually used in information and entertainment electronics or they are used to attach and guide sensor connections. To cover every individual application, FKH bases are available in different sizes. They can be supplied as self-adhesive or screwable versions.
Sales unit: 100 pieces
Lieske Part No.: 1580406

Available as a screw or adhesive base. Optimal hold of the bundle thanks to the curved plate. The binder can be threaded in from two directions. Perfect for applications with tight installation conditions. The TY series has a rectangular design and is used primarily in the areas of telecommunications, control cabinet construction and industrial series production. The TY mounting bases are very robust and hold the bundle firmly in place even in the event of high vibrations. TY3G1 is very narrow in direct comparison with other mounting bases and can still find a place even in tight installation spaces.
Sales unit: 100 pieces
Lieske Part No.: 134333

Available as a screw or adhesive base. Optimal hold of the bundle thanks to the curved plate. The binder can be threaded in from two directions. Perfect for applications with tight installation conditions. The TY series has a rectangular design and is used primarily in the areas of telecommunications, control cabinet construction and industrial series production. The TY mounting bases are very robust and hold the bundle firmly in place even in the event of high vibrations. TY3G1 is very narrow in direct comparison with other mounting bases and can still find a place even in tight installation spaces.
Sales unit: 100 pieces
Lieske Part No.: 672809

Type: TY8H1-N66-NA-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 585054

Rational solution for parallel bundling. Installation possible with just two screws. Flexible bundle diameters by combining cable ties of different lengths. Suitable for a wide range of elongated holes. These fastening elements are used for parallel cable routing in control cabinet and mechanical engineering as well as in military systems.
Sales unit: 100 pieces
Lieske Part No.: 2054877

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 986167

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 720738

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 739374

Compact design with a slight curvature. Offers a secure hold for the bundled goods. Easy installation using a screw. Particularly suitable for a secure hold in the event of vibrations. Wherever cables and lines need to be securely fastened or cable bundles are laid, these mounting bases are an optimal solution. Thanks to the curved design, the cable bundle adapts perfectly to the base and ensures that the cables are safely guided within the application.
Sales unit: 1000 pieces
Lieske Part No.: 992082

Rational solution for parallel bundling. Installation possible with just two screws. Flexible bundle diameters by combining cable ties of different lengths. Suitable for a wide range of elongated holes. These fastening elements are used for parallel cable routing in control cabinet and mechanical engineering as well as in military systems.
Sales unit: 1000 pieces
Lieske Part No.: 1232050

Rational solution for parallel bundling. Installation possible with just two screws. Flexible bundle diameters by combining cable ties of different lengths. Suitable for a wide range of elongated holes. These fastening elements are used for parallel cable routing in control cabinet and mechanical engineering as well as in military systems.
Sales unit: 1000 pieces
Lieske Part No.: 560915

Screwable mounting bases. Bundled goods to the side for screwing. Compact design. CL8 can be combined with cable ties up to 8 mm wide. Secure hold even with larger bundle diameters. Due to the lateral routing of the cable and line bundle, these bases are ideal for installation in tight spaces. Particularly for fastening in corners and on edges, as the hole can be offset by a few millimeters.
Sales unit: 8000 pieces
Lieske Part No.: 1239153