Sales unit: 10 pieces
Lieske Part No.: 1599056

Can be installed in the construction profile in one second with a simple twisting movement. Can be installed and removed several times. For cable ties up to 8 mm wide. The bundled goods are centered by the rounded contour of the bundle holder. Cable tie holder for cable ties T50 - T120. The bundled goods can be guided lengthways or crossways to the profile. For construction profiles from all well-known manufacturers with the dimensions: 20 x 20, 30 x 30 mm 40 x 40 mm and 45 x 45 mm. Since no mounting hole is required, the ACFM is very easy to install and handle. The ACFM2W10PT6 is specially designed for the Bosch Rexroth profile with a groove width of 10 mm and external dimensions of 45 mm.
Sales unit: 500 pieces
Lieske Part No.: 2049740

Can be used as a screw or adhesive base. Perfect system solution in combination with cable ties. Special design keeps the cable tie in position. Assembly processes are simplified. Very good initial adhesion that increases over time. Innovative fastening solution for high and low energy surfaces. Q-Mount fastening bases in combination with Q-tie cable ties ensure reliable and permanent fastening. With the special SolidTack adhesive, the Q-Mount is an innovative fastening solution for low energy surfaces and where drilling holes is not desired or possible. The adhesive bases are suitable for a wide range of applications on painted surfaces, plastics or metals. The base is used in areas such as control cabinet construction, rail vehicle construction, aerospace, automobiles and agricultural machinery.
Sales unit: 100 pieces
Lieske Part No.: 2058178

Can be used as a screw or adhesive base. Perfect system solution in combination with cable ties. Special design keeps the cable tie in position. Assembly processes are simplified. Very good initial adhesion that increases over time. Innovative fastening solution for high and low energy surfaces. Q-Mount fastening bases in combination with Q-tie cable ties ensure reliable and permanent fastening. With the special SolidTack adhesive, the Q-Mount is an innovative fastening solution for low energy surfaces and where drilling holes is not desired or possible. The adhesive bases are suitable for a wide range of applications on painted surfaces, plastics or metals. The base is used in areas such as control cabinet construction, rail vehicle construction, aerospace, automobiles and agricultural machinery.
Sales unit: 100 pieces
Lieske Part No.: 2058177

Als Schraub- oder Klebesockel einsetzbar. Perfekte Systemlösung in Kombination mit Kabelbindern. Spezielles Design hält den Kabelbinder in Position. Montageprozesse werden vereinfacht. Sehr gute Anfangshaftung die mit der Zeit zunimmt. Innovative Befestigungslösung für hoch- und niederenergetische Oberflächen. Q-Mount Befestigungssockel in Kombination mit Q-tie Kabelbindern sorgen für eine zuverlässige und dauerhafte Befestigung. Mit dem speziellen SolidTack Kleber ist der Q-Mount eine innovative Befestigungslösung für niederenergetischen Oberflächen und wo Lochbohrungen nicht gewünscht oder möglich sind. Die Klebesockel eignen sich für eine Vielzahl von Anwendungen auf lackierten Oberflächen, Kunststoffen oder Metallen. Der Sockel kommt in Bereichen wie dem Schaltschrankbau, Schienenfahrzeugbau, der Luft und Raumfahrt sowie bei Automobilen und Landmaschinen zum Einsatz. Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 541258

Als Schraub- oder Klebesockel einsetzbar. Perfekte Systemlösung in Kombination mit Kabelbindern. Spezielles Design hält den Kabelbinder in Position. Montageprozesse werden vereinfacht. Sehr gute Anfangshaftung die mit der Zeit zunimmt. Innovative Befestigungslösung für hoch- und niederenergetische Oberflächen. Q-Mount Befestigungssockel in Kombination mit Q-tie Kabelbindern sorgen für eine zuverlässige und dauerhafte Befestigung. Mit dem speziellen SolidTack Kleber ist der Q-Mount eine innovative Befestigungslösung für niederenergetischen Oberflächen und wo Lochbohrungen nicht gewünscht oder möglich sind. Die Klebesockel eignen sich für eine Vielzahl von Anwendungen auf lackierten Oberflächen, Kunststoffen oder Metallen. Der Sockel kommt in Bereichen wie dem Schaltschrankbau, Schienenfahrzeugbau, der Luft und Raumfahrt sowie bei Automobilen und Landmaschinen zum Einsatz. Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 2144963

Als Schraub- oder Klebesockel einsetzbar. Perfekte Systemlösung in Kombination mit Kabelbindern. Spezielles Design hält den Kabelbinder in Position. Montageprozesse werden vereinfacht. Sehr gute Anfangshaftung die mit der Zeit zunimmt. Innovative Befestigungslösung für hoch- und niederenergetische Oberflächen. Q-Mount Befestigungssockel in Kombination mit Q-tie Kabelbindern sorgen für eine zuverlässige und dauerhafte Befestigung. Mit dem speziellen SolidTack Kleber ist der Q-Mount eine innovative Befestigungslösung für niederenergetischen Oberflächen und wo Lochbohrungen nicht gewünscht oder möglich sind. Die Klebesockel eignen sich für eine Vielzahl von Anwendungen auf lackierten Oberflächen, Kunststoffen oder Metallen. Der Sockel kommt in Bereichen wie dem Schaltschrankbau, Schienenfahrzeugbau, der Luft und Raumfahrt sowie bei Automobilen und Landmaschinen zum Einsatz. Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 2144962

Flexible base for rounded and angled surfaces. FMB brackets with a uniform acrylic adhesive system. Greater design freedom, weight reduction and process cost optimization. Adhesive with high tensile and shear strength. Innovative fastening solution for high and low energy surfaces. Protective film with overhang for very easy removal. Cable ties can be looped in from four sides. Fast, easy and flexible installation. FlexTack bases can also be used for high energy surfaces such as metal or glass. FlexTack bases are an innovative fastening solution especially for curved and angled surfaces. The acrylate adhesive used is suitable for high and low energy surfaces. The flexible adhesive bases offer an alternative wherever screw fastenings are not possible and, due to the product properties, can be used for a wide range of applications. These include powder-coated or painted surfaces, metal surfaces and plastic cladding in various areas such as control cabinets, rail vehicle, aircraft, vehicle and agricultural machinery construction.
Sales unit: 100 pieces
Lieske Part No.: 666241

SolidTack MB base with high-performance adhesive tape made of homogeneous acrylate. Very good initial adhesion, which increases over time. Innovative fastening solution for high and low energy surfaces. Protective film with overhang makes it easier to remove. SolidTack bases are an innovative fastening solution, especially for low energy surfaces. They offer an alternative wherever screw fastenings are not possible. The bases can be used for a variety of applications. These include powder-coated or painted surfaces, metal surfaces or plastic cladding in various areas such as control cabinets, rail vehicle, aircraft, vehicle and agricultural machinery construction.
Sales unit: 100 pieces
Lieske Part No.: 2058176

Can be installed in the construction profile in one second with a simple twisting movement. Can be installed and removed several times. For cable ties up to 8 mm wide. The bundled goods are centered by the rounded contour of the bundle holder. Cable tie holder for cable ties T50 - T120. The bundled goods can be guided lengthways or crossways to the profile. For construction profiles from all well-known manufacturers with the dimensions: 20 x 20, 30 x 30 mm 40 x 40 mm and 45 x 45 mm. Since no mounting hole is required, the ACFM is very easy to install and handle. The ACFM2W10PT6 is specially designed for the Bosch Rexroth profile with a groove width of 10 mm and external dimensions of 45 mm.
Sales unit: 25 pieces
Lieske Part No.: 1054854

Can be installed in the construction profile in one second with a simple twisting movement. Can be installed and removed several times. For cable ties up to 8 mm wide. The bundled goods are centered by the rounded contour of the bundle holder. Cable tie holder for cable ties T50 - T120. The bundled goods can be guided lengthways or crossways to the profile. For construction profiles from all well-known manufacturers with the dimensions: 20 x 20 mm, 30 x 30 mm, 40 x 40 mm, 45 x 45 mm and 50 x 50 mm. Because no mounting hole is required, the ACFM is very easy to install and handle. The ACFM5W8PT4.5 is specially designed for the ITEM profile with a groove width of 8 mm and external dimensions of 40 mm.
Sales unit: 500 pieces
Lieske Part No.: 2057940

Can be installed in the construction profile in one second with a simple twisting movement. Can be installed and removed several times. For cable ties up to 8 mm wide. The bundled goods are centered by the rounded contour of the bundle holder. Cable tie holder for cable ties T50 - T120. The bundled goods can be guided lengthways or crossways to the profile. For construction profiles from all well-known manufacturers with the dimensions: 20 x 20 mm, 30 x 30 mm, 40 x 40 mm, 45 x 45 mm and 50 x 50 mm. Because no mounting hole is required, the ACFM is very easy to install and handle. The ACFM7W10PT5.3 is specially designed for the ITEM profile with a groove width of 10 mm and external dimensions of 50 mm.
Sales unit: 500 pieces
Lieske Part No.: 2057941

Can be installed in the construction profile in one second with a simple twisting movement. Can be installed and removed several times. For cable ties up to 8 mm wide. The bundled goods are centered by the rounded contour of the bundle holder. Cable tie holder for cable ties T50 - T120. The bundled goods can be guided lengthways or crossways to the profile. For construction profiles from all well-known manufacturers with the dimensions: 20 x 20 mm, 30 x 30 mm, 40 x 40 mm, 45 x 45 mm and 50 x 50 mm. Because no mounting hole is required, the ACFM is very easy to install and handle. The ACFM5W8PT4.5 is specially designed for the ITEM profile with a groove width of 8 mm and external dimensions of 40 mm.
Sales unit: 25 pieces
Lieske Part No.: 2057942

Can be installed in the construction profile in one second with a simple twisting movement. Can be installed and removed several times. For cable ties up to 8 mm wide. The bundled goods are centered by the rounded contour of the bundle holder. Cable tie holder for cable ties T50 - T120. The bundled goods can be guided lengthways or crossways to the profile. For construction profiles from all well-known manufacturers with the dimensions: 20 x 20 mm, 30 x 30 mm, 40 x 40 mm, 45 x 45 mm and 50 x 50 mm. Because no mounting hole is required, the ACFM is very easy to install and handle. The ACFM7W10PT5.3 is specially designed for the ITEM profile with a groove width of 10 mm and external dimensions of 50 mm.
Sales unit: 25 pieces
Lieske Part No.: 1866352

Can be installed in the construction profile in one second with a simple twisting movement. Can be installed and removed several times. For cable ties up to 8 mm wide. The bundled goods are centered by the rounded contour of the bundle holder. Cable tie holder for cable ties T50 - T120. The bundled goods can be guided lengthways or crossways to the profile. For construction profiles from all well-known manufacturers with the dimensions: 20 x 20, 30 x 30 mm 40 x 40 mm and 45 x 45 mm. Since no mounting hole is required, the ACFM is very easy to install and handle. The ACFM4W8PT2.2 is specially designed for the Bosch Rexroth profile with a groove width of 8 mm and external dimensions of 30 mm.
Sales unit: 25 pieces
Lieske Part No.: 1056343

Can be installed in the construction profile in one second with a simple twisting movement. Can be installed and removed several times. For cable ties up to 8 mm wide. The bundled goods are centered by the rounded contour of the bundle holder. Cable tie holder for cable ties T50 - T120. The bundled goods can be guided lengthways or crossways to the profile. For construction profiles from all well-known manufacturers with the dimensions: 20 x 20 mm, 30 x 30 mm, 40 x 40 mm, 45 x 45 mm and 50 x 50 mm. Because no mounting hole is required, the ACFM is very easy to install and handle. The ACFM8W6PT2.75 is specially designed for the ITEM profile with a groove width of 6 mm and external dimensions of 30 mm.
Sales unit: 25 pieces
Lieske Part No.: 2057943

Can be installed in the construction profile in one second with a simple twisting movement. Can be installed and removed several times. For cable ties up to 8 mm wide. The bundled goods are centered by the rounded contour of the bundle holder. Cable tie holder for cable ties T50 - T120. The bundled goods can be guided lengthways and crossways to the profile. For construction profiles from all well-known manufacturers with the dimensions: 20 x 20, 30 x 30 mm 40 x 40 mm and 45 x 45 mm. Since no mounting hole is required, the ACFM is very easy to install and handle. The ACFM1W13PT3.5 is specially designed for the Ziegler profile with a groove width of 13 mm and external dimensions of 45 mm.
Sales unit: 25 pieces
Lieske Part No.: 1373825

Flexibler Sockel für abgerundete und gewinkelte Oberflächen. FMB-Halterungen mit einheitlichem Acrylklebstoffsystem. Größere Designfreiheit, Gewichtsreduzierung und Prozesskostenoptimierung. Kleber mit hoher Zug- und Scherfestigkeit. Innovative Befestigungslösung für mit hoch und niederenergetischen Oberflächen. Schutzfolie mit Überstand für sehr einfaches Abziehen. Kabelbinder kann von vier Seiten eingeschlauft werden. Schnelle, einfache und flexible Montage. FlexTack Sockel können auch für hochenergetische Oberflächen wie Metall oder Glas verwendet werden. FlexTack Sockel sind eine innovative Befestigungslösung insbesondere für gebogene und abgewinkelte Oberflächen. Der verwendete Acrylat-Klebstoff ist für hoch- und niederenergetische Oberflächen geeignet. Die flexiblen Klebesockel bieten eine Alternative überall dort, wo Schraubbefestigungen nicht möglich sind und können, bedingt durch die Produkteigenschaften, für eine Vielzahl von Anwendungen eingesetzt werden. Dazu gehören unter anderem pulverlackbeschichtete oder lackierte Oberflächen, Metalloberflächen sowie Kunststoffverkleidungen in diversen Bereichen wie Schaltschränken, Schienenfahrzeug-, Flugzeug-, Fahrzeug- und Landmaschinenbau. Verkaufseinheit: 10000 ST.
Sales unit: 100 pieces
Lieske Part No.: 2145394

Can be used as a screw or adhesive base. Perfect system solution in combination with cable ties. Special design keeps the cable tie in position. Assembly processes are simplified. Very good initial adhesion that increases over time. Innovative fastening solution for high and low energy surfaces. Q-Mount fastening bases in combination with Q-tie cable ties ensure reliable and permanent fastening. With the special SolidTack adhesive, the Q-Mount is an innovative fastening solution for low energy surfaces and where drilling holes is not desired or possible. The adhesive bases are suitable for a wide range of applications on painted surfaces, plastics or metals. The base is used in areas such as control cabinet construction, rail vehicle construction, aerospace, automobiles and agricultural machinery.
Sales unit: 10 pieces
Lieske Part No.: 677341

Verkaufseinheit: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 2146043

für ein oder zwei Solarleitungen. sicherer Halt der Leitungen. einfacher Tausch von Leitungen im Wartungsfall. für Kanten 1,0 - 3,0 mm. Unser EC1-3SPDHC6-7 ist perfekt für die Verlegung von Solarleitungen. Der Artikel kann durch einfaches Aufstecken per Hand auf Solarmodule appliziert werden. Danach können bis zu zwei Leitungen durch einfaches Eindrücken in den Halter sicher geführt werden.
Sales unit: 100 pieces
Lieske Part No.: 2094433

For parallel guidance of two bundles that can be rotated 360° relative to each other. The H-design ensures a good form fit to the bundled goods. The head of the tie can be brought into the optimal bundle position. For cable ties up to 12.7 mm wide. Also for subsequent assembly of bundled goods. These elements were developed for the automotive and truck industries, but can be used in any area where a connection of two bundles and a defined distance are required.
Sales unit: 50 pieces
Lieske Part No.: 301756

Design ermöglicht sicheren Formschluss zum Bündelgut. Konventionelle Kabelschellen können ersetzt werden. Bevorratung verschiedener Schellengrößen nicht mehr notwendig. Für Schwerlastkabelbinder bis 13,5-mm-Breite. Wartung der Bündel durch einfachen Kabelbindertausch möglich. Entwickelt für die Automobil- bzw. LKW-Industrie werden Heavy Duty Mounts (HDM) überall dort eingesetzt, wo eine robuste, sichere und dauerhafte Bündelung gewünscht ist. Ebenfalls gehören der Schienenfahrzeugbau sowie die Verteidigungs- und Agrarindustrie zu den Fokusmärkten. Verkaufseinheit: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 705700

Type: QM20-PA66-NA-C1 item: 1 ST.
Sales unit: 100 pieces
Lieske Part No.: 136780

Type: QM30-PA66-NA-C1 item: 1 ST.
Sales unit: 100 pieces
Lieske Part No.: 754057

Sales Unit: 1 ST.
Sales unit: 50 pieces
Lieske Part No.: 948925

Type: QM20A-PA66-NA-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 613847

Type: QM30A-PA66-NA-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 526419

Type: QM40A-PA66-NA-L1
Sales unit: 50 pc
Sales unit: 50 pieces
Lieske Part No.: 571840

Sales Unit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 163272

Special shape of the cable tie holder keeps the Q-tie cable tie in place during installation. Fastened with two screws. Cable tie can be looped in from four sides. Extra quick and flexible installation in combination with Q-tie cable ties. Q-Mount mounting bases are ideal for holding our innovative Q-tie cable ties. They are suitable for all applications where reliable and permanent fixation is required.
Sales unit: 100 pieces
Lieske Part No.: 2057040

Type: QM20A-PA66-BK-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 347744

Type: QM30A-PA66-BK-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 855349

Type: QM40A-PA66-BK-L1
Sales unit: 50 pc
Sales unit: 50 pieces
Lieske Part No.: 368128

Type: CTQM5-PA66-NA-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 160528

Type: CTQM5-PA66-BK-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 478582

Type: TY3G1S PA66W BK 100 ST
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 717673

Self-adhesive base, halogen-free cable for all bands up to 4 mm range. The curved plate provides good support for larger cable bundles Material: Polyamide 6.6 Colour: natural temperature range: -4 ° C to +85 ° C cable tie Max. Width: 4 mm Dimensions (L x W): 2 x
4 Type: TY3G
S-N66-NA-C
Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 530902

Type: TY8G1S PA66W BK ST 100 Quantity: 1 ea.
Lieske Part No.: 668160

Self-adhesive base, halogen-free
Universally applicable.For cable tie
8 mm width, the curved plate provides good
support for larger cable bundles
Material: Polyamide 6.6
Color: natural
Temperature range: -40 ° C to +85 ° C
max cable ties. Width: 8.0 mm
Dimensions (L x W): 32 x 25 Type: TY8G1S-N66-NA-C1


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 148605

Self-adhesive base, halogen-free for stranded wire, cables, wires, etc., for stranded wire, cables, wires, etc. from 3 to
8 mm in diameter. Material: Polyamide 6.6 Colour: natural temperature range: -4 ° C to +85 ° C Dimensions (L x W):
3 x
3 Type: RA3-N66-NA-C
Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 834604

Self-adhesive base, halogen-free
for stranded wire, cables, wires, etc.
for stranded wire, cables, wires, etc. 3-18 mm
Diameter.
Material: polyamide 6.6
Color: natural
Temperature range: -40 ° C to +85 ° C

Dimensions (L x W): 19 X 19

Type: RA6-N66-NA-C1
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 273526

Self-adhesive base, halogen-free for stranded wire, cables, wires, etc., for stranded wire, cables, wires, etc. from 3 to
8 mm in diameter. Material: Polyamide 6.6 Colour: natural temperature range: -4 ° C to +85 ° C Dimensions (L x W):
9 x
9 Type: RA9-N66-NA-C
Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 985920

Self-adhesive base, halogen-free
for stranded wire, cables, wires, etc.
for stranded wire, cables, wires, etc. 3-18 mm
Diameter.
Material: polyamide 6.6
Color: natural
Temperature range: -40 ° C to +85 ° C Dimensions (L x W): 25 X 25 Type: RA13-N66-NA-C1




Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 638861

Self-adhesive base, halogen-free for stranded wire, cables, wires, etc., for stranded wire, cables, wires, etc. from 3 to
8 mm diameter. Material: Polyamide 6.6 Colour: natural temperature range: -4 ° C to +85 ° C Dimensions (L x W): 28 X 28 Type: RA
8-N66-NA-C
Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 546800

Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 843727

Type: RB5 PA66 NA 100 ST
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 383433

Type: RB8-N66-NA-H1
Sales unit: 5000 pc
Sales unit: 5000 pieces
Lieske Part No.: 825153

The HellermannTyton ribbon cable holders are used for securing and guiding of flat cables and are available in four different sizes. Optionally, the FKH are secured with high-quality acrylic adhesive or M3 screws. Thanks to the practical clip fastener allows the holder quickly and easily open and close. The ribbon cable holder is made of high-quality, impact-modified polyamide 6.6 and hence can be used even in very dry areas. The rounded edges and extremely soft wings any flat cable is guided and held gently. Type: A FKH3 PA66HIR BK
ST sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 830204

One-piece mounting base for ribbon cables and round cables. Raised mounting surface ensures proper bonding. Quick and easy installation. Can be opened and reused. Cables are gently attached using soft holders. FKH bases are used to attach ribbon cables in information electronics, in consumer electronics or to connect sensors. Since each installation scenario is individual, FKH bases are available in different dimensions and can be supplied as self-adhesive and/or screwable versions.
Sales unit: 100 pieces
Lieske Part No.: 304235