Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 100 pieces
Lieske Part No.: 287527

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 100 pieces
Lieske Part No.: 716920

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 8000 pieces
Lieske Part No.: 1242592

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 8000 pieces
Lieske Part No.: 958848

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 6000 pieces
Lieske Part No.: 203434

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 1000 pieces
Lieske Part No.: 974460

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 1000 pieces
Lieske Part No.: 1242818

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 100 pieces
Lieske Part No.: 690874

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 100 pieces
Lieske Part No.: 981359

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 100 pieces
Lieske Part No.: 660712

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 100 pieces
Lieske Part No.: 254328

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 100 pieces
Lieske Part No.: 582730

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 100 pieces
Lieske Part No.: 147823

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 100 pieces
Lieske Part No.: 1597928

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 1000 pieces
Lieske Part No.: 588889

The cable ties are internal gear teeth and are made entirely of plastic. They can be installed by hand or with a processing tool. Good the TY-ITS cable ties for easy bundling and securing of cables, pipes and hoses are. Type: UB7 PA66 NA item: ST 15000.
Sales unit: 15000 pieces
Lieske Part No.: 826317

Internal teeth. Made entirely of plastic. Installation by hand or with a processing tool. Suitable for easy bundling and fastening of cables, lines and hoses.
Sales unit: 8000 pieces
Lieske Part No.: 1232037

Installation by simply pushing it on by hand. For edges of 1 - 3 mm, 3 - 6 mm, 4 - 6 mm or 6 - 8 mm. Integrated metal clip holds the clip firmly on the edge. Metal clip is made of specially coated spring steel. Suitable when neither drilling nor adhesive can be used. Elements from the EdgeClip series are an excellent alternative wherever drilling holes and welding studs cannot be implemented and adhesive cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, mainly in the automotive and construction industries. The silver-gray clip, the heart of our EdgeClips, is made of double-tempered spring steel DIN EN 10132-4 C75S. The spring steel gives the clip both the necessary stability to achieve high pull-off forces and sufficient flexibility for a wide range of applications. The double coating is initially carried out with a zinc flake system and then an inorganic surface seal. Of course, no chromium VI is used here. This means that the clamp complies with the current end-of-life vehicle disposal directive 200/53/EC and the ban on heavy metals. The refined spring steel clamp also meets the salt spray resistance requirements of DIN EN ISO 9227 NSS (min. 840 hours without base metal corrosion) and EN ISO 6270-Z-CH (min. 720 hours without base metal corrosion). This is why this is a solution approved by many automobile manufacturers, even for exposed installation positions, e.g. in the engine compartment and chassis area.
Sales unit: 500 pieces
Lieske Part No.: 1312006

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 1232046

Type: ASI-HIR-NA-D1
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 956991

2-part cable tie with welding stud holder, pre-assembled. The head of the tie can be moved to the optimal bundling position. Easy assembly, no tools required. SB types for 5 mm welding studs and M5 threaded studs. Versions with plate for additional fastening of insulating materials. Oval welding stud sleeve for horizontal tolerance compensation. GBS8C for 8 mm welding studs for parallel guidance. The SBH5 series is mainly used in the automotive sector. The SB5 and SBS5 series are suitable for bundling and fastening cable harnesses and hoses in control cabinet construction, the automotive and construction machinery industries.
Sales unit: 500 pieces
Lieske Part No.: 308950

2-part cable tie with welding stud holder, pre-assembled. The head of the tie can be moved to the optimal bundling position. Easy assembly, tool-free. Soft-push design for easy manual assembly. SB types for 5 mm welding studs and M5 threaded studs. SBH variants with plate for additional fastening of insulating materials. Oval welding stud sleeve for horizontal tolerance compensation. GBS8C for 8 mm welding studs for parallel guidance. The SBH5 series is mainly used in the automotive sector. The SB5 and SBS5 series are suitable for bundling and fastening cable harnesses and hoses in control cabinet construction, the automotive and construction machinery industries.
Sales unit: 500 pieces
Lieske Part No.: 361933

2-part cable tie with welding stud holder, pre-assembled. The head of the tie can be moved to the optimal bundling position. Easy assembly, tool-free. Soft-push design for easy manual assembly. SB types for 5 mm welding studs and M5 threaded studs. SBH variants with plate for additional fastening of insulating materials. Oval welding stud sleeve for horizontal tolerance compensation. GBS8C for 8 mm welding studs for parallel guidance. The welding stud holders are mainly used in the automotive sector. They are suitable for bundling and fastening cable harnesses and hoses in control cabinet construction, the automotive and construction machinery industries.
Sales unit: 500 pieces
Lieske Part No.: 2129199

The fastening ties with welding stud holders in the FBB series are designed for 5 mm welding studs or M5 threaded studs. The FBB series band has a grid structure for increased band flexibility. FBB ties with the addition of M have a recess in the lower area so that the fastening tie does not rest on any welding burrs. The welding stud holder can be easily pressed onto the stud by hand (soft push). The fastening ties in the FBB series can be removed from the welding stud and reused by simply turning them anti-clockwise. All versions can be reopened and are therefore suitable for adding additional cables. The FBB series meets the specific requirements of the automotive and aviation industries, white goods and electrical engineering.
Sales unit: 500 pieces
Lieske Part No.: 298567

Type: T30RFT6LG PA66HIRHS BK 500 ST
Sales unit: 4000 pc
Sales unit: 500 pieces
Lieske Part No.: 248311

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 2500 pieces
Lieske Part No.: 567237

Type: BHT375-HS-BK-G1
Sales unit: 250 pc
Sales unit: 250 pieces
Lieske Part No.: 939725

2-part cable tie with expansion anchor as base part, pre-assembled. The head of the tie can be brought into the optimal bundle position. Easy assembly, no tools required. Expansion anchors lock into place with an audible and tangible click. High pull-out and holding force, even when subjected to loads from different directions. Plates protect against dirt and splash water penetrating. These fastening ties are used wherever efficient work combined with high holding forces is required. They are used in the automotive sector, among other places, and wherever cables need to be safely routed.
Sales unit: 500 pieces
Lieske Part No.: 1580386

Type: T50ROSEC5B-MC5-BK-D1
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 294333

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1-3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip series is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2055167

Type: T50ROSEC5A-MC5-BK-D1
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 261385

Sales Unit: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 279358

Type: BHT375M-HS-BK-G1
Sales unit: 250 pc
Sales unit: 250 pieces
Lieske Part No.: 430008

Type: REL30SDP6-N66-BK-D1
Sales unit: 2000 pc
Sales unit: 500 pieces
Lieske Part No.: 786845

The head of the divider takes up a defined position when assembled. Easy assembly, no tools required. High pull-out and holding force, even when subjected to loads from different directions. Protects against the ingress of dirt and dust. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with threads. DOP versions for oval holes serve as anti-twisting protection. Originally developed for fastening cable harnesses in the automotive industry, but due to their simplicity and user-friendliness, these parts are also used in other industries, for example in aviation, switchgear manufacturers, household appliance manufacturers.
Sales unit: 500 pieces
Lieske Part No.: 558087

Type: T30RFT5 PA66HS, PA66HIRHS BK ST 500 item: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 174696

Type: T50RFT5-MC1-BKGY-D1
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 880753

2-part cable tie with welding bolt holder, pre-assembled. For parallel routing of cables, lines and hoses. The head of the tie can be moved into the optimal bundle position. Easy assembly, no tools required. For 5 mm welding bolts and M5 threaded bolts. The fastening base is often used to secure cables, pipes and hoses in automobile and truck construction. It is simply pushed onto a bolt with a diameter of 5 mm.
Sales unit: 500 pieces
Lieske Part No.: 351890

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1 - 3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, primarily in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 140314

Type: T30REC4B PA66HS,PA66HIRHS BK 500 ST
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 288758

Type: T30REC4A PA66HS, PA66HIRHS BK ST 500 item: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 365766

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1 - 3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, primarily in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2054013

Sales Unit: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 757987

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1 - 3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, primarily in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 183758

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 1051654

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 1232045

Type: T50RFT6-MC5-BK-D1
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 873934

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 1314990

Quantity: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 969211

Easy installation, no tools required. Expansion anchors lock into place with an audible and tangible click. High pull-out and holding force, even when subjected to loads from different directions. Plates protect against dirt and dust penetration. KSFT variants with rounded expansion anchors for minimized installation height. The T50SST5 variant offers support against axial displacement. Fastening ties with expansion anchors are used to securely bundle and fasten cable harnesses and hoses in control cabinet construction, the automotive industry and the aerospace industry. This fastening solution is used to secure cable harnesses. We offer a variety of plate thicknesses and hole sizes for every application.
Sales unit: 500 pieces
Lieske Part No.: 2092998