Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Sales unit: 8 pieces
Lieske Part No.: 1331211

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Sales unit: 3 pieces
Lieske Part No.: 1331210

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Sales unit: 2 pieces
Lieske Part No.: 1331209

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Lieske Part No.: 1331193

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Lieske Part No.: 1330916

Robust und vielseitig - der dickwandige, halogenfreie Warmschrumpfschlauch mit Schmelzkleber.
Bei dem Warmschrumpfschlauch HDT-AN handelt es sich um einen dickwandigen, halogenfreien Warmschrumpfschlauch aus modifiziertem, strahlenvernetzten Polyolefin. Er eignet sich zur Verwendung an allen Kunststoff- und Massekabeln sowohl für Verlegungen im Innenraum als auch für Freiluft- und Erdverlegungen. Dabei dient er der Isolation und Abdichtung von Verbindungen jeglicher Art, insbesondere auch als Außenschlauch für Steuerleitungsgarnituren. Zur besseren Versiegelung verfügt er über eine Klebstoffbeschichtung auf der Innenwand. Der äußerst alterungsbeständige Warmschrumpfschlauch ist UV-beständig und resistent gegen viele chemische Einflüsse. Seine Schrumpfrate beträgt vier zu eins und er ist einsetzbar in einem Temperaturbereich von -55 °C bis +130 °C. Er ist nicht selbstverlöschend. Verkaufseinheit: 1 ST.
Lieske Part No.: 507835

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Lieske Part No.: 1330915

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Lieske Part No.: 1330914

Diese einfach montierbaren trennbaren Steckendverschlüsse sind für den Einsatz im Innenbereich bei mit Draht abgeschirmten, nicht armierten isolierten Polymerkabeln mit bis zu 24kV vorgesehen. Der trennbare Steckendverschluss dient dazu, eine Verbindung zwischen dem Kabel und der Schaltanlage, dem Transformator und anderen Anlagen herzustellen.
Die Produkte sind aus hochwertigem EPDM geformt und werden in Packungen mit Materialien für drei Phasen geliefert. Im Lieferumfang sind dabei eine Komponente zur Belastungskontrolle, ein Erdungsset, ein mechanischer Kabelschuh sowie die Montageanleitung enthalten. Die geraden, Winkel- und T-Steckendverschlüsse decken eine große Bandbreite an Kabelquerschnitten ab. Alle Sets wurden einer vollständigen Typprüfung gemäß Cenelec HD 629.1 (DIN VDE 0278) unterzogen. Verkaufseinheit: 1 ST.
Lieske Part No.: 704088

The 3MT HDT-A heat shrink tubing is a rigid, thick-walled and halogen-free heat shrink tubing range that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. HDT-A heat shrink tubing has a flame-retardant, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
The 3MT HDT-A heat shrink tubing is a thick-walled heat shrink tubing made of modified, radiation-cross-linked polyolefin. It is suitable for use on all plastic and ground cables for both outdoor and underground installations. It is used to insulate and seal connections of all kinds, especially as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range of -55 °C to +130 °C. It is self-extinguishing and complies with the test standard Lloyds Register of Shipping MIL-I-23053/15.
Sales unit: 25 pieces
Lieske Part No.: 2021920

The 3MT HDT-A heat shrink tubing is a rigid, thick-walled and halogen-free heat shrink tubing range that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. HDT-A heat shrink tubing has a flame-retardant, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
The 3MT HDT-A heat shrink tubing is a thick-walled heat shrink tubing made of modified, radiation-cross-linked polyolefin. It is suitable for use on all plastic and ground cables for both outdoor and underground installations. It is used to insulate and seal connections of all kinds, especially as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range of -55 °C to +130 °C. It is self-extinguishing and complies with the test standard Lloyds Register of Shipping MIL-I-23053/15.
Sales unit: 25 pieces
Lieske Part No.: 2109909

HDT-A heat shrink tubing is a rigid, thick-walled and halogen-free range of heat shrink tubing that provides reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. HDT-A heat shrink tubing has a flame-retardant, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
HDT-A heat shrink tubing is a thick-walled heat shrink tubing made of modified, radiation-cross-linked polyolefin. It is suitable for use on all plastic and ground cables for both outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range of -55 °C to +130 °C. It is self-extinguishing and complies with the test standard Lloyds Register of Shipping MIL-I-23053/15.
Sales unit: 15 pieces
Lieske Part No.: 2021918

The 3MT HDT-A heat shrink tubing is a rigid, thick-walled and halogen-free heat shrink tubing range that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. HDT-A heat shrink tubing has a flame-retardant, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
The 3MT HDT-A heat shrink tubing is a thick-walled heat shrink tubing made of modified, radiation-cross-linked polyolefin. It is suitable for use on all plastic and ground cables for both outdoor and underground installations. It is used to insulate and seal connections of all kinds, especially as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range of -55 °C to +130 °C. It is self-extinguishing and complies with the test standard Lloyds Register of Shipping MIL-I-23053/15.
Sales unit: 15 pieces
Lieske Part No.: 2021919

HDT-A heat shrink tubing is a rigid, thick-walled and halogen-free range of heat shrink tubing that provides reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. HDT-A heat shrink tubing has a flame-retardant, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
HDT-A heat shrink tubing is a thick-walled heat shrink tubing made of modified, radiation-cross-linked polyolefin. It is suitable for use on all plastic and ground cables for both outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range of -55 °C to +130 °C. It is self-extinguishing and complies with the test standard Lloyds Register of Shipping MIL-I-23053/15.
Sales unit: 10 pieces
Lieske Part No.: 2109910

The 3MT HDT-A heat shrink tubing is a rigid, thick-walled and halogen-free heat shrink tubing range that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. HDT-A heat shrink tubing has a flame-retardant, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
The 3MT HDT-A heat shrink tubing is a thick-walled heat shrink tubing made of modified, radiation-cross-linked polyolefin. It is suitable for use on all plastic and ground cables for both outdoor and underground installations. It is used to insulate and seal connections of all kinds, especially as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range of -55 °C to +130 °C. It is self-extinguishing and complies with the test standard Lloyds Register of Shipping MIL-I-23053/15.
Sales unit: 5 pieces
Lieske Part No.: 2021921

Die Warmschrumpfschläuche HDT-A sind eine starre, dickwandige und halogenfreie Schrumpfschlauch-Reihe, die für zuverlässige Leistung bei elektrischen Spleißen, Verbindungen und Abschlüssen bis zu 1,0 kV sowie für mechanischen und Umweltschutz sorgt. HDT-A Schrumpfschläuche verfügen über eine flammhemmende, vernetzte Polyolefin-Außenwand und eine werkseitig aufgebrachte Klebstoffschicht auf der Innenseite.
Bei dem Warmschrumpfschlauch HDT-A handelt es sich um einen dickwandigen Warmschrumpfschlauch aus modifiziertem, strahlenvernetzten Polyolefin. Er eignet sich zur Verwendung an allen Kunststoff- und Massekabeln sowohl für Freiluft- als auch Erdverlegungen. Dabei dient er der Isolation und Abdichtung von Verbindungen jeglicher Art, insbesondere auch als Außenschlauch für Steuerleitungsgarnituren. Zur besseren Versiegelung verfügt er über eine Klebstoffbeschichtung auf der Innenwand. Der äußerst alterungsbeständige Warmschrumpfschlauch ist UV-beständig und resistent gegen viele chemische Einflüsse. Seine Schrumpfrate beträgt vier zu eins und er ist einsetzbar in einem Temperaturbereich von -55 °C bis +130 °C. Er ist selbstverlöschend und entspricht der Prüfnorm Lloyds Register of Shipping MIL-I-23053/15. Verkaufseinheit: 5 ST.
Sales unit: 5 pieces
Lieske Part No.: 493483

Warmschrumpfschläuche MDT-A ist eine mittelwandige Schrumpfschlauch-Reihe mit Heißschmelzkleber, das für zuverlässige Leistung bei elektrischen Spleißen, Verbindungen und Abschlüssen bis zu 1,0 kV sowie für mechanischen und Umweltschutz sorgt. MDT-A Schrumpfschläuche haben eine halogenfreie, vernetzte Polyolefin-Außenwand und eine werkseitig aufgebrachte Klebeschicht auf der Innenseite.
Bei dem Warmschrumpfschlauch MDT-A handelt es sich um einen halogenfreien, mittelwandigen Warmschrumpfschlauch aus strahlenvernetzten Polyolefin mit einer Schmelzkleberbeschichtung. Der Schmelzkleber dringt in alle Unebenheiten und Hohlräume ein und verhindert ein Eindringen von Feuchtigkeit. Der Warmschrumpfschlauch MDT-A eignet sich zur Isolierung von Kunststoff- und Massekabeln bis 0,6/1kV sowohl für die Verlegung in Freiluft und im Erdreich. Der alterungsbeständige Warmschrumpfschlauch ist UV-beständig und resistent gegen viele chemische Einflüsse. Er ist einsetzbar in einem Temperaturbereich von -55 °C bis +130 °C. Durch seine hohe Schrumpfrate von 4,5 zu eins können Sie große Durchmessersprünge mit nur einem Schlauch erfassen. Der Warmschrumpfschlauch MDT-A erfüllt technische Anforderungen nach IEC 60684 und ist zugelassen nach Lloyds Register of Shipping , Zertifikat 95/30032(E5). Er ist halogenfrei und RoHS-konform. Verkaufseinheit: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 838382

Robust und vielseitig - der dünnwandige Warmschrumpfschlauch ohne Schmelzkleber in der praktischen Spenderbox.
Bei dem Warmschrumpfschlauch HSR handelt es sich um einen dünnwandigen Warmschrumpfschlauch aus modifiziertem, strahlenvernetztem Polyolefin. Er ist für vielfältige Einsatzmöglichkeiten geeignet, insbesondere zur elektrischen Isolation und Kennzeichnung von Verbindungen. Der Warmschrumpfschlauch ist äußerst alterungsbeständig und bleibt dauerhaft hochflexibel. Seine Schrumpfrate beträgt zwei zu eins. Er ist selbstverlöschend und einsetzbar in einem Temperaturbereich von -55 °C bis +135 °C. Die mitgelieferte Spenderbox ermöglicht eine effiziente Lagerung und Handhabung, da Sie den Schlauch leicht auf die ideale Länge kürzen können. Verkaufseinheit: 5 ST.
Sales unit: 5 pieces
Lieske Part No.: 832587

PIG, very flexible shrink tubing for strongly contoured components, thin-walled, shrink ratio 3:1, inner diameter before shrinking 1.6 mm, black, shrink temperature > +90 degrees C, length 10.5 m
Lieske Part No.: 301444

PIG, very flexible shrink tubing for strongly contoured components, thin-walled, shrink ratio 3:1, inner diameter before shrinking 4.5 mm, black, shrink temperature > +90 degrees C, length 9 m
Lieske Part No.: 2034031

PIG, very flexible shrink tubing for strongly contoured components, thin-walled, shrink ratio 3:1, inner diameter before shrinking 6.4 mm, green / yellow striped, shrink temperature > +90 degrees C, length 7 m
Lieske Part No.: 299331

PIG, very flexible shrink tubing for strongly contoured components, thin-walled, shrink ratio 3:1, inner diameter before shrinking 9.5 mm, black, shrink temperature > +90 degrees C, length 6 m
Lieske Part No.: 2034032

PIG, very flexible shrink tubing for strongly contoured components, thin-walled, shrink ratio 3:1, inner diameter before shrinking 9.5 mm, green / yellow striped, shrink temperature > +90 degrees C, length 6 m
Lieske Part No.: 299332

PIG, very flexible shrink tubing for strongly contoured components, thin-walled, shrink ratio 3:1, inner diameter before shrinking 12.7 mm, green / yellow striped, shrink temperature > +90 degrees C, length 5.5 m
Lieske Part No.: 299333

PIG, very flexible shrink tubing for strongly contoured components, thin-walled, shrink ratio 3:1, inner diameter before shrinking 19 mm, green / yellow striped, shrink temperature > +90 degrees C, length 4.5 m
Lieske Part No.: 299334

PIG, very flexible shrink tubing for strongly contoured components, thin-walled, shrink ratio 3:1, inner diameter before shrinking 25.4 mm, black, shrink temperature > +90 degrees C, length 50 m
Lieske Part No.: 301445

PIG, very flexible shrink tubing for strongly contoured components, thin-walled, shrink ratio 3:1, inner diameter before shrinking 25.4 mm, black, shrink temperature > +90 degrees C, length 3.3 m
Lieske Part No.: 2034033

PIG, very flexible shrink tubing for strongly contoured components, thin-walled, shrink ratio 3:1, inner diameter before shrinking 25.4 mm, green / yellow striped, shrink temperature > +90 degrees C, length 3.3 m
Lieske Part No.: 1317231

PIG, very flexible shrink tubing for strongly contoured components, thin-walled, shrink ratio 3:1, inner diameter before shrinking 40 mm, black, shrink temperature > +90 degrees C, length 50 m
Lieske Part No.: 301446

CMP, CSA / UR approved shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 3.2 mm, black, shrink temperature > +110 degrees C, length 300 m
Lieske Part No.: 928505

CMP, CSA / UR approved shrink tubing, thin wall, shrink ratio 2:1, inner diameter before shrinking 3.2 mm, white, shrink temperature > +110 degrees C, length 30.5 m
Lieske Part No.: 300280

CMP, CSA / UR approved shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 6.4 mm, black, shrink temperature > +110 degrees C, length 300 m
Lieske Part No.: 1323163

GYS, flexible green / yellow striped shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 25.4 mm, green / yellow striped, shrink temperature > +90 degrees C, length 3.3 m
Lieske Part No.: 300078

GYS, flexible green / yellow striped shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 12.7 mm, green / yellow striped, shrink temperature > +90 degrees C, length 30.5 m
Sales unit: 25 pieces
Lieske Part No.: 116432

GYS, flexible green / yellow striped shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 19.1 mm, green / yellow striped, shrink temperature > +90 degrees C, length 12.2 m
Sales unit: 10 pieces
Lieske Part No.: 116433

GYS, flexible green / yellow striped shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 19.1 mm, green / yellow striped, shrink temperature > +90 degrees C, length 5 m
Lieske Part No.: 1311335

PLG, flexible shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 25.4 mm, red, shrink temperature > +110 degrees C, length 3.3 m
Lieske Part No.: 1317145

PLG, flexible shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 25.4 mm, blue, shrink temperature > +110 degrees C, length 3.3 m
Lieske Part No.: 300279

HSB1000-8 PLG, flexible shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 25.4 mm, grey, shrink temperature +110 degrees C, length 3.3 m
Sales unit: 5 pieces
Lieske Part No.: 551714

PLG, flexible shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 25.4 mm, transparent, shrink temperature > +110 degrees C, length 3.3 m
Sales unit: 5 pieces
Lieske Part No.: 324538

PLG, flexible shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 3.2 mm, brown, shrink temperature > +110 degrees C, length 11.5 m
Lieske Part No.: 1314095

PLG, flexible shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 3.2 mm, yellow, shrink temperature > +110 degrees C, length 11.5 m
Lieske Part No.: 299339

PLG, flexible shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 3.2 mm, blue, shrink temperature > +110 degrees C, length 11.5 m
Lieske Part No.: 300277

PLG, flexible shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 3.2 mm, white, shrink temperature > +110 degrees C, length 11.5 m
Sales unit: 5 pieces
Lieske Part No.: 1314100

PLG, flexible shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 4.7 mm, red, shrink temperature > +110 degrees C, length 9.5 m
Lieske Part No.: 299340

PLG, flexible shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 4.7 mm, blue, shrink temperature > +110 degrees C, length 9.5 m
Lieske Part No.: 300275

PLG, flexible shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 4.7 mm, white, shrink temperature > +110 degrees C, length 9.5 m
Sales unit: 5 pieces
Lieske Part No.: 1314085

PLG, flexible shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 6.4 mm, brown, shrink temperature > +110 degrees C, length 7.5 m
Lieske Part No.: 1313495

PLG, flexible shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 6.4 mm, red, shrink temperature > +110 degrees C, length 7.5 m
Sales unit: 5 pieces
Lieske Part No.: 1317144

PLG, flexible shrink tubing, thin-walled, shrink ratio 2:1, inner diameter before shrinking 6.4 mm, green, shrink temperature > +110 degrees C, length 7.5 m
Sales unit: 5 pieces
Lieske Part No.: 1314129