Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Dold 0061302 GF9016 3AC200-480V UH DC24V 22KW soft starter

Your rating:
Average rating
product review for Dold 0061302 GF9016 3AC200-480V UH DC24V 22KW soft starter
( 0 / 5 ) 0 ratings
Dold 0061302
This image may differ from the desired article.
902,24 EUR
( 1.073,67 EUR incl. VAT )
≈ £755.17  |  ≈ $991.56
plus delivery charges: 55,00 €
On order · Delivery time approx. 20 workdaysinfo_outline
1x Dold 0061302 GF9016 3AC200-480V UH DC24V 22KW soft starter
Datasheet:file_download Download
Lieske Part No.:1002137
Mfg Part No: 0061302
UPC/EAN: 4030641613020
Weight:1 kg
Type:GF9016 3AC200-480V UH DC24V 22KW
Graduated prices net
From piecesPrice per pieces
3861,64 EUR
6821,04 EUR
9780,44 EUR
12739,84 EUR

Product information for Dold 0061302:

The Dold GF9016 is an electronic soft-start and soft-stop device for three-phase asynchronous motors. It is designed for controlled operation of motor start-up and shut-down processes with a rated power up to 22 kW. The device variant with auxiliary voltage DC 24 V is designed for supply and motor voltages in the range 3AC 200–480 V. The device complies with the standard IEC/EN 60947-4-2 and is marked with the UKCA approval. The width is 52.5 mm, enabling installation in standard control panels.

Applications
This device is suitable for drives with mechanical loads where a smooth start-up and shut-down are required. Typical application fields include conveyor belts, fans, pumps, compressors, woodworking machines, centrifuges, packaging machines, and door drives. It is particularly advantageous for drives with gear, belt, or chain transmission, as it reduces mechanical stress caused by sudden torque impulses.

Functions and Equipment in Detail
The GF9016 operates on the principle of phase-cut control. Two motor phases are controlled via power semiconductors (thyristors), allowing the current and torque of the motor to increase gradually. This prevents the sudden start-up torque that would occur with direct switching. After start-up, the circuit is bypassed via internal relay contacts to minimize power loss in the device. The soft-stop function extends the natural deceleration time of the drive to avoid jerky stopping. Device functions include mains monitoring and temperature monitoring, contributing to safety and reliability. An alarm output is integrated to indicate faults.

Technology Explained Simply
Control is achieved via an electronic ramp control, which drives the thyristors through an ignition pulse generator. Optionally, a kick-start function can be activated, providing a short pulse at the beginning of start-up to assist the start-up process. The device connection terminals are clearly marked: X1 (output +24 V), X2 (start/stop), X3 (kick-start 0.5 s), X4 (0 V), X5/X6 (alarm output, fault), X7/X8 (alarm output, device bypassed). The green LED indicates the ready-to-operate status, while the yellow LED flashes at a specific frequency during faults, indicating the fault code (e.g., supply voltage fault, overload, electronic fault). W3 wiring is possible, increasing flexibility during installation.

Compatibility and Accessories
The device is designed for 3-phase asynchronous motors operated in the voltage range 3AC 200–480 V. The load voltage is up to 3AC 400 V. The auxiliary voltage is DC 24 V. The device functions are designed for motors up to 22 kW. Control is performed via the designated terminals, with adjustment options for start-up and shut-down time as well as start-up voltage allowing individual adaptation to specific applications.

Mounting and Installation
The device is mounted in standard control panels. The width of 52.5 mm corresponds to the format for motors up to 22 kW. The connection terminals are clearly labeled, simplifying installation. Connections are made to terminals L1, L2, L3 (supply voltage) and T1, T2, T3 (motor voltage). Control is performed via signal terminals X1 to X8. W3 wiring is possible, enabling flexible installation in existing systems.

Advantages in Operation
Smooth start-up and shut-down reduce mechanical wear on motors and drive components, increasing service life. Reduction of start-up currents relieves the supplying network. Simple mounting and clear signaling via LEDs and alarm outputs facilitate maintenance and fault diagnosis. Integrated mains and temperature monitoring increase operational safety. The possibility of W3 wiring expands application options in existing installations.

Technical data
Extra functionsMains monitoring, Temperature monitoring
For three-phase motors, 400 V up to22 kW
Load voltage up to3AC 400 V
Width45 mm, 52,5 mm
TypeGF 9016
Signalling outputYes
Variant
Auxiliary voltageDC 24 V
Mains / motor voltage3AC 200 - 480 V
Nominal motor power22 kW
Approvals and MarkingsUKCA


Product data sheet
Datasheet for Dold 0061302, EAN: 4030641613020

Questions & answers

What is the delivery time of Dold 0061302 GF9016 3AC200-480V UH DC24V 22KW soft starter?

The article Dold 0061302 GF9016 3AC200-480V UH DC24V 22KW soft starter is currently not in stock but has been backordered.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0061302 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Dold 0061302 GF9016 3AC200-480V UH DC24V 22KW soft starter always at the best possible price. We can give you a discount of 2% on Dold 0061302 GF9016 3AC200-480V UH DC24V 22KW soft starter if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 3 pieces of Dold 0061302 GF9016 3AC200-480V UH DC24V 22KW soft starter we can offer you a price of 861,64 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Dold 0061302 GF9016 3AC200-480V UH DC24V 22KW soft starter
Dold 0061302 GF9016 3AC200-480V UH DC24V 22KW soft starter
902,24 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Dold 0061302 GF9016 3AC200-480V UH DC24V 22KW soft starter
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
9 + 6 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.