ALLNET Switch smart managed Layer2 10 Port? PoE budget 140W? 8x PoE at ? 2x SFP? 48,3 cm ( 19 inch ) ? Fanless ? ALL-SG8310v2PM

ALLNET Switch smart managed Layer2 10 Port • PoE Budget 140W • 8x PoE at • 2x SFP • 48,3 cm ( 19 inch ) • Fanless • ALL-SG8310v2PM Highlights: 8-Port 10/100/1000Mbit/s with full PoE support 2x SFP slots for optional MiniGBICS PoE Power 4x a´ 30 watts (IEEE802.3at or 8x IEEE802.3af) FANLESS DESIGN with internal power supply Jumbo frames and IGMP snooping support link aggregation and rapid spanning tree IEEE802.1q VLAN tagging and 802.1p priority queues PoE budget 140 W The ALL
-SG8310v2PM is an 8-port 10/100/1000Mbit/s switch with PoE support on all ports, perfect for segmenting larger networks. It is an excellent choice to provide your network with more performance and efficiency 802.3afPower over Ethernet (PoE)
The ALL-SG8310v2PM supports the PoE standard IEEE 802.3at on 4 ports with up to 30 watts of power per port for the connected PoE devices or on 8 ports the full power according to IEEE802.3af with up to 15 ,4W. The maximum PoE budget is 140W. The ALL-SG8310v2PM uses the existing LAN cabling for the power supply. This makes it easier to install PoE devices such as WLAN access points, IP cameras, VoIP telephones and much more, as there is no need to take power sockets into account when placing them. The PoE ON/OFF function allows the administrator to conveniently reset the end devices remotely by switching off the PoE power supply for each individual port.
High-Speed Networking/Jumbo Frames Support
The ALL-SG8310v2PM offers an excellent solution for expanding your Gigabit network. With gigabit speeds, this product offers high flexibility and high bandwidth connectivity to servers, workstations and other connected devices. In addition, it also supports 9.6K Jumbo Frames for better network utilization, which greatly improves large file transfers.
Extensive administration/management functions
Modern applications for video surveillance with IP cameras and Voice over IP are increasingly replacing classic analog technologies. The demands on the network infrastructure also increase. The ALLNET ALL-SG8310v2PM is equipped with many management and security functions for all modern communication scenarios. IGMP Snooping, Tagged VLAN, Quality of Service, Port Trunking, Flow Control, Storm Control, Link Aggregation, IEEE802.1x, SNMP v1/ v2c and Spanning Tree are just a small excerpt from the extensive functional portfolio of the ALL-SG8310v2PM. For more details see Technical Details.
Technical Details: Items Specifications Model No. ALL-SG8310v2PM Key Components RTL8382M
Flash IC:16MB
DDR: 1Gb
IP808AR PSE controller I/O ports 8x GbE ports, RJ45
2 x SFP Giga ports
Reset Button: reset to default setting, re-start system
Console port by RTJ45 Type PoE ports Port# 1~ 8
IEEE802.3at, IEEE802.3af LED Define PWR/SYS: Green LEDOff: power off or fail On : power on Blinking: system booting up PoE Alert: Green LEDOff: No over PoE Max power Alert On: Over PoE Max power Alert Port LED:
Link/ACT:Off: port disconnected or link fail Green on: 10/100/1000Mbps connected Blinking: sending or receiving data PoE: Off: PoE power output off Green on: PoE power output on SFP:

• Off: disconnected or fail
• Green: 100/1000Mbps connected
• Blinking: data transmitting HW feature IEEE802.3 10BASE-T
IEEE802 .3u 100BASE-TX
IEEE802.3ab 1000BASE-T
IEEE802.3az EEE
IEEE802.3at, IEEE802.3af
MAC address Table: 8K
Packet buffer size: 4.1M
Jumbo Frame: 9K bytes Console Support Cisco-like CLI command Security DT Security circuit. PoE power pin-out Alternative A (Pin 1.2/3.6) PoE Output power capacity Maximum output :30W per each portCompliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or PoE+ Automatically discover the connection of PD device and immediately sends power to it Auto disable port if the port current is over 700mA or short happens Priority default setting is lower port NO. has high priority The maximum power used by power devices is defined by the following classification. When Port works in Auto Mode, the output port power limit will be associated with PD classification Value. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable Power Input Internal power supply
Input: 100-240V AC
Output: 180W PoE Power Budget 140W Reset button Support reset to default configuration Dimension 265(W) x 183(D) x 44(H) mm FAN Design Fan-less Temperature Operating: 0 ~ 40?
Storage: -40~70? Humidity Operating: 10% ~ 90% RH (non-condensing)
Storage: 5% ~ 90% RH (non-condensing) Software Features Status System Information Logging Message Port Statistics Error Disabled Bandwidth Utilization Link Aggregation MAC Address Table 8K Network IP Address Static / Dynamic System Time SNTP / From Computer / Manual Time Port Port Setting State / Speed / Duplex / Flow Control Error Disabled Recovery Interval ACL / ARP Rate Limit / BPDU Guard / Broadcast Flood / DHCP Rate Limit / Port Security / Self Loop / Unicast Flood / Unknown Multicast Flood Link Aggregation Group Port Setting State / Speed / Flow Control LACP EEE Jumbo Frame 9K Byte PoE Global Setting Schedule Status Priority Setting Power Limit Power Show VLAN VLAN Create VLAN VLAN Configuration Membership Port Setting Voice VLAN Property Voice OUI Protocol VLAN Protocol Group Group Binding MAC VLAN MAC Group Group Binding Surveillance VLAN Property Surveillance OUI GVRP Property Membership Statistics MAC Address Table Dynamic Address Aging Time Static Address Filtering Address Spanning Tree Property State / Operation Mode / Path Cost / BPDU Handling Operation Mode : STP/RSTP/MSTP Port Setting MST Instance MST Port Setting Statistics Discovery LLDP Property Port Setting MED Network Policy MED Port Setting < styl