Allnet ALL-SG8626PM Switch full managed 24 Port Gigabit 390W 24x PoE+ 4x SFP fanless 48,3 cm ( 19 inch ) content_copy

Industry-Electronics Switch full managed 24 Port Gigabit 390W / 24x PoE+ / 4x SFP / Fanless / 48,3 cm ( 19 inch ) / ALL-SG8626PM" Cost-effective 24 Port Smart Managed Gigabit Layer-2 Switch +4x SFP MiniGbic Slots fanless for Desktop and 48,3 cm ( 19 inch ) Rack installation Highlights: 24 Port Gigabit Layer2+ Switch Architecture Port 23/24 Combo Ports for TP or SFP (1G) and Port 25/26 SFP (1G) Slots Supports various PoE management functions, including PoE-Schedule, PoE-PD-Alive etc. Supports SFP DDM & Cable diagnostics Supports G.8032 ERPS, self-recovery time < 20 ms Supports Port Aggregation 4KV surge protection, 6KV contact/8KV air ESD protection Totally fanless, no more annoying noises... max. 390W budget 48,3 cm ( 19 inch ) rack mount or wall/desktop mounting possible The new Industry-Electronics ALL-SG8626PM switch provides an optimal foundation for small and medium workgroups with high network and data traffic, enabling fast data transmission in the network. With a total of 22 backward-compatible Gigabit PoE ports, connected PoE end devices are reliably and powerfully interconnected. Thanks to its fanless design, the ALL-SG8626PM is also ideal for office environments, as it produces no disturbing noise. The switch is Layer 2+ Full Managed and therefore supports all necessary standards such as QoS, VLAN, Spanning Tree, IGMP Snooping up to Link Layer Discovery Protocol. This ensures highest performance & security in your network. The robust metal enclosure is suitable for mounting in a 19 rack as well as for wall mounting. In addition, the ALL-SG8626PM features 2x SFP miniGBIC slots to connect remote servers/uplink devices via fiber optic cables. The ALL-SG8626PM is a Layer 2+ Full Managed PoE switch that offers 24*10/100/1000M RJ45 ports and 4*1G Uplink SFP slot ports (2 shared combo), with 24 PoE ports compliant with IEEE802.3 af/at standards, single port PoE power output up to 30W. Comprehensive PoE management functions As a managed PoE switch for CCTV surveillance, wireless and VoIP networks, the ALL-SG8626PM features the following special PoE management functions: PoE-PD-Alive check Scheduled reboot of power supply PoE schedule Monitoring of PoE usage Soft reboot PoE non-stop Priority of PoE port power feeding Intelligent PD-Alive check for frozen PDs The industrial PoE switch ALL-SG8626PM with 24 ports can be configured to monitor the status of connected PDs in real time. As soon as a PD stops functioning and does not respond, the ALL-SG8626PM reboots the PoE port power supply and brings the PD back online. Furthermore, reliability is significantly improved by resetting the PD power supply, thereby reducing the administrator's management workload. PoE schedule function for energy saving To protect the environment, the ALL-SG8626PM switch Ethernet PoE, in addition to its ability to deliver high wattage, can effectively control power supply. The PoE schedule function helps activate or deactivate PoE power supply for each PoE port during specific time intervals, and is a powerful feature that helps SMEs or enterprises save energy and money. Scheduled PD restart The intelligent PoE switch ALL-SG8626PM allows each connected PoE-IP camera or PoE wireless access point to be restarted at a specific time every week. This reduces the risk of IP camera or AP crash due to buffer overflow. Redundant ring with fast recovery for critical network applications The ALL-SG8626PM supports redundant ring technology and has strong, fast self-recovery capability to prevent interruptions and external interference. It integrates the advanced ITU-T G.8032 ERPS technology, the Spanning Tree Protocol (802.1s MSTP), and a redundant power supply system into the customer's industrial automation network, improving system reliability and uptime in harsh factory environments. In a specific simple ring network, the data connection recovery time can be as low as 20 ms. Strong Layer-2 functions The Layer-2 Ethernet switch ALL-SG8626PM can be programmed for advanced Layer-2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP Snooping, and MLD Snooping. By aggregating supported ports, the ALL-SG8626PM enables the operation of a high-speed trunk group with multiple ports and also supports fail-over. Efficient and versatile management methods For efficient management, the ALL-SG8626PM is equipped with console, web, and SNMP management interfaces. With its integrated web-based management interface, it offers a user-friendly, platform-independent management and configuration option. For text-based management, access is possible via Telnet and the console port. For standard-based monitoring and management software, it provides an SNMPv3 connection that encrypts packet content during each session for secure remote management. Intelligent PoE switch with SFP-DDM function The ALL-SG8626PM supports the SFP-DDM function (Digital Diagnostic Monitor), which enables the network administrator to easily monitor real-time parameters of SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Technical specifications: Model ALL-SG8626PM Copper Ports 22-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports Combo Interfaces 2x 100/1000BASE-X SFP interface shared with port-23 and port-24 Supports 100/1000Mbps dual mode and DDM Fiber Ports 2-100/1000BASE-X SFP interfaces, supports 100/1000Mbps dual mode PoE Ports 1~24-802.3af/802.3at PoE Injector Ports Console Ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 52 Gbps/non-blocking Throughput 38.69Mpps @64 bytes Address Table 8K entries Share Data Buffer 4 Mb Jumbo Frame 9600 Bytes SDRAM 1Gb Flash Memory 128Mb Flow Control IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex Reset Button >2 sec.: Factory default and reset Power Supply 100~240V AC, 50/60Hz, 4A (max.) Power Consumption Max. 400 watts/1122 BTU PoE Standards IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per Port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) LED Indicators Power: Green Solid on- power work normal, off- power disconnected System: Green Blink -work normally, solid on- soft work abnormal, fast Blink – soft upgrade PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 Interfaces (Port 1 to Port 24): 1000 LNK/ACT (Green) Blink - port connected with data transmission Solid on- port connected without data transmission 100/1000Mbps SFP Interfaces (Port 22 to Port 24): Green Blink - port connected with data transmission Solid on- port connected without data transmission EMC Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 Layer2 Functions Port configuration Auto-negotiation Flow Control Port Mirror: TX/RX/BOTH Many-to-1 monitor CPU Mirror Traffic statistics Link Aggregation Static link aggregation LACP (Dynamic Trunk/Static Trunk) Algorith based on Source/Destination MAC Algorithm based on Source/Destination IP MAC Table Aging Time Static MAC address Dynamic MAC address management VLAN 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunneling Private VLAN (Protected port) GARP/GVRP ACL 256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter Ring Protection <20ms G.8032 ERPS Ring Fast Ring Multicast 256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast Routing QOS 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate Limiting (Ingress/Egress) Stri Priority Security Features Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP Protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port Port Isolation Loopback detection Management SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration Backup/Reload Dual Firmware LLDP Configuration Export/Import CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow Other Features DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP Option 67 DHCP Option 82 NTP/SNTP Client UPNP UDLD PoE management Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft-reboot PoE Non-stop Maintenance Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring Layer 3 functions Static Routing IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) IPV6 IPv6 neighbor discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 Dimension 440x290x44.5 mm Weight 4.5 kg Working Temperature -10 °C to 45 °C Storage Temperature -20 °C to 70 °C MTBF 50,000hrs