UBIQUITI NETWORKS UACC-AOC-SFP10-5M Ubiquiti UniFi Long-Range Direct Attach Cable (AOC), 10 Gbps, 5 m, content_copy

The product is an SFP+ direct-attach cable from UBIQUITI NETWORKS, type UACC-AOC-SFP10-5M, specifically designed for use in networks requiring high data rates. It serves as an active optical cable (AOC) for connecting SFP+ ports, for example between switches, servers, or other network devices, enabling data transmission with a maximum throughput rate of 10 Gbit/s. The cable length is 5 meters, with the technology also available in lengths of 10, 20, and 30 meters. The cable is designed for indoor use and is suitable for applications requiring a stable, high-speed connection over short to medium distances.

Applications

The SFP+ direct-attach cable is used in professional network environments, particularly in data centers, server rooms, or for connecting network switches within a data center. It is suitable for applications requiring high bandwidth and low latency, such as virtualization environments, cloud infrastructures, or high-performance computing. The use of active optical cables (AOC) provides an alternative to traditional copper cables, especially when the maximum range of 30 meters is sufficient and a data rate higher than 1 Gbit/s is required.

Features and Equipment in Detail

The cable features an SFP+ connector type at both ends, enabling direct connection between compatible SFP+ ports. Supported data rates include 10 Gbit/s and 1 Gbit/s, with the speed automatically adjusting to the capabilities of the connected devices. The jacket color is aqua, which is commonly used in the industry to indicate 10-Gigabit-Ethernet cables. The cable jacket is made of PVC, providing good mechanical stability and flexibility. The jacket has an outer diameter of 3.0 mm, enabling a compact and convenient form factor.

Technology Explained Simply

The cable operates at a wavelength of 850 nm, typical for multimode optics and optimized for short to medium distances. The use of active optical components (AOC) means the cable not only transmits light but also contains electronic components that amplify the signal and ensure stable transmission. This enables higher data rates and reduced error susceptibility compared to pure copper cables. The operating temperature ranges from 0 to 70 °C, allowing use in standardized indoor environments such as server rooms or data centers.

Compatibility and Accessories

The cable is designed for SFP+ ports and can be connected to any device supporting SFP+ interfaces. It is part of the UniFi product family from Ubiquiti and is commonly used in combination with UniFi switches or other Ubiquiti network devices. Compatibility with other manufacturers is not explicitly stated, although the SFP+ interface is a standard used in many network devices.

Installation and Mounting

Installation is performed by simply inserting the SFP+ connectors into the corresponding ports of the network devices. No additional tools or configurations are required. The connection becomes active immediately once the connectors are properly connected. The 5-meter cable length allows flexible placement of devices within a room without requiring additional extenders or switches.

Advantages in Operation

The cable offers a high data rate of 10 Gbit/s, which is crucial for modern network applications. The active optics ensure stable and reliable transmission, even under heavy loads. The compact design and PVC insulation facilitate handling and cable routing in server rooms. The operating temperature range of 0 to 70 °C ensures reliable performance under typical indoor conditions. The aqua-colored jacket simplifies identification in the network as a 10-Gigabit cable.

General
Connector type	SFP+ to SFP+
Cable length	5 m
Throughput rate	10 Gbit/s
Supported data rates	10/1 Gbit/s
Cable jacket	PVC
Jacket OD	3,0 mm
Wavelength	850 nm
Jacket colour	Aqua
Operation temperature	0 to 70 °C

---