Trilux LTX LT-SB3L-LRA/1500-730 2G1 ETDD pole-top luminaire 7307051

Decorative mast-top luminaire in cylinder shape with add-on roof. With intelligent label for quickly calling up luminaire information using a QR code. With autonomous power reduction via integrated evaluation electronics. Reduction of the luminaire luminous flux to 50% for a period of 7 hours (-2h/+5h), distributed around a daily new center of the duty cycle. Matching mast on request. In MLT version (multi-lens technology), consisting of highly efficient, UV and temperature-resistant lens systems in a quadruple arrangement. With symmetrical, wide-beam light distribution. For lighting paths, especially cycle paths. Other beam characteristics are available for flexible adaptation to customer-specific lighting tasks. The subsequent installation of a rear / side shield is possible as an accessory to be ordered separately. Luminaire luminous flux and light color are fixed, with constant luminous flux at the end of the service life (CLO). Rated luminous flux 1500 lm, rated power 14 W, maximum luminaire luminous efficacy 107 lm/W. Light color warm white, correlated color temperature (CCT) 3000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) = 5 SDCM. Other LED light colors available on request. Average rated service life LCLO(tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum. Luminaire roofs made of corrosion-resistant aluminum. Surface anthracite coated (DB 703). Coating suitable for marine weather on request. Cover pan made of highly impact-resistant PMMA, translucent. Protection class (EN 61140): II, protection type (DIN EN 60529): IP65, shock resistance according to IEC 62262: IK10. Mast available on request. Wind attack area fw 0.120 m2. Weight: 8.0 kg. With mounted connection cable 6 m. With electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Surge voltage resistance differential mode / common mode: 6 kV / 10 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body. Luminaire 10 years, spare parts (LED module, control gear, optical system) available 15 years after invoice date subject to reasonable changes in the interests of progress.
Type: LTX LT-SB3L-LRA/1500-730 2G1 ETDD