SSD 128GB Transcend M.2 MTE110S (M.2 2280) PCIe Gen3 x4 NVMe content_copy

The Transcend SSD TS128GMTE110S is an internal Solid-State Drive (SSD) in the M.2 2280 form factor, specifically developed for use in modern computers and notebooks. The device offers a storage capacity of 128 GB and utilizes 3D triple-level cell (TLC) NAND flash technology, enabling high data density while maintaining good performance. The SSD is connected via a PCI Express 3.0 x4 interface with NVMe protocol, ensuring fast data transfer rates. The maximum read speed is 1800 MB/s, while the write speed is 1500 MB/s. These values are typical for SSDs of this class and enable efficient use in everyday workflows such as booting operating systems, opening applications, or working with files.

Applications

The SSD is suitable for use in desktop PCs, notebooks, and other computers that feature an M.2 slot with PCIe 3.0 x4 support and NVMe protocol. It is particularly well-suited for systems requiring fast response times and a compact design. Due to the M.2 2280 form factor, it is compatible with many modern devices, including motherboards and laptops that support this storage format. Use in workstations, home computers, or small office systems is well covered by the performance and reliability of the SSD.

Features and Specifications in Detail

The SSD includes several technical features that enhance performance and extend the device’s lifespan. These include TRIM support, which improves file system efficiency for data deletion and helps maintain stable write speeds over time. Thermal throttling ensures that the SSD automatically reduces performance at high temperatures to prevent overheating. Intelligent SLC Caching uses a portion of the storage as temporary SLC mode to accelerate write operations. Additionally, the SSD is equipped with Low-Density Parity Check (LDPC), an error correction technology that enhances data integrity. Support for S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) allows the operating system to monitor the SSD’s health status.

Technical Explanation

The SSD uses the NVMe specification 1.3, which was specifically developed for SSDs and enables direct communication with the processor via the PCIe interface. Unlike older SATA SSDs, which operate through a separate controller interface, the NVMe SSD communicates directly with the system, resulting in lower latency and higher transfer rates. The 3D TLC technology means that memory cells are arranged in multiple stacked layers, increasing storage density. This reduces costs and power consumption, although it may lead to slightly lower write performance under very heavy loads.

Compatibility and Accessories

The SSD is designed for systems that have an M.2 2280 slot with PCIe 3.0 x4 support and NVMe protocol. Compatibility with specific motherboards or notebooks depends on physical connection options and supported interfaces. The SSD is delivered as a standalone storage module without additional adapters or cables.

Installation and Mounting

Installation involves inserting the M.2 module into the corresponding slot on the motherboard. Physical mounting typically requires a screwdriver to secure the module. The exact procedure depends on the specific computer model. The SSD connects directly to the system via the PCIe interface, without additional cables or adapters. Installation is performed after turning off the device and opening the enclosure.

Operational Advantages

The SSD offers significantly faster data access times compared to traditional hard disk drives (HDDs), resulting in shorter boot times for operating systems and applications, as well as faster file transfers. The mechanical stability, with no moving parts, increases reliability and reduces the risk of physical damage. The low power consumption and heat generation also make the SSD suitable for mobile devices. Integrated features such as TRIM, thermal throttling, and LDPC contribute to long-term stability and data integrity.

General
Capacity	128 GB
Reading speed	1800 MB/s
Write speed	1500 MB/s
NAND flash memory type	3D triple-level cell (TLC)
Form factor	M.2 2280
Interface	PCI Express 3.0 x4 (NVMe)
Protocol	NVMe 1.3
TRIM support
Thermal throttling
Intelligent SLC caching
Low-Density Parity Check
S.M.A.R.T.
DRAM-less

---