Accessories from Agfeo
You have been filtering for Agfeo and therefore you see now only Accessories from Agfeo displayed.
You can choose other manufacturers on the left side in the menu or get the complete overview.
Accessories from Agfeo
 |
 Agfeo 1102699 Replacement handset without T10/T11/T15/ST15 silver handset cord
Product typeend device accessoriesear category (ElektroG): irrelevantShippingWEEE: 16714465Lieske Part No.: 785018 Mfg Part No: 1102699 Type: PERP |
10,91 EUR
 ≈ £9.13 | ≈ $12.21
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Empty housing Agfeo AS35, refurbished
Housing exchange Lieske Part No.: 465412 Mfg Part No: 4100224 |
12,00 EUR
≈ £10.04 | ≈ $13.43
in stockinfo_outline
|
PBX Accessories – Product Details & Advice
PBX accessories cover all peripheral products that expand, connect or protect a telephone system: expansion modules (a/b, S0, VoIP), PSU/UPS solutions, gateways (ISDN-to-SIP), software licences for additional users or functions, and connection cables. Auerswald expansion modules (e.g. COMpact 4S0 Module) can be inserted in compatible COMpact systems to increase S0 port count. ISDN-to-SIP gateways (e.g. Beronet, Patton) enable continued use of ISDN PBX systems on all-IP lines. Software licences for CTI, voicemail and UC extensions are offered manufacturer-specifically.
PBX overview: Telephone Systems. DECT system accessories: DECT System Phones.
Frequently Asked Questions
▶ How do I find the right expansion module for my system? Expansion modules are manufacturer-specific and model-dependent. Key factors: model designation of the PBX, expansion slot size (S, M, L for Auerswald) and required interface (a/b, S0, VoIP, DECT). Contact us with your system model for a matching recommendation. |
▶ What is a SIP-ISDN gateway and what is it needed for? A SIP-ISDN gateway (also ISDN VoIP gateway) connects an ISDN PBX to a SIP trunk from the IP provider. It translates ISDN signalling (DSS1) into SIP (RFC 3261) and vice versa. This allows continued use of existing ISDN systems on all-IP lines without immediate full migration. |
▶ Which UPS is suitable for a telephone system? PBX systems require a UPS with a pure sine wave in battery mode (not simulated sine!), as many PBX power supplies are sensitive to non-sinusoidal voltage. Capacity: for a PBX with 50–100 W power consumption, a UPS with 600–1000 VA capacity provides 15–30 minutes of bridging time. |