Softing IT Networks WX_AD_81_PL2,228264 Softing WireXpert copper accessories: RJ45 CAT 8.1 Permanent Link test adapter (1 kit)
|
1.108,80 EUR 1.140,00 EUR |
|
|
( 1.319,47 EUR incl. VAT ) ≈ £926.96 | ≈ $1,218.57 plus delivery charges: 55,00 € |
|
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |
| Lieske Part No.: | 2063574 |
|---|---|
| Mfg Part No: | WX AD 81 PL2,228264 |
| UPC/EAN: | 0046382254020 |
| Weight: | 0.4 kg |
Product information for Softing IT Networks WX_AD_81_PL2,228264:
Permanent Link test adapter enables precise analysis of cable quality by measuring the physical properties of the connection directly at the endpoints. This is particularly important for the installation and maintenance of high-speed networks, where even minor errors in cabling can lead to signal loss or data transmission disruptions. The adapter is part of a complete kit required for carrying out professional cable tests.
Functions and equipment in detail
The kit includes two Permanent Link adapters, a reference cable, and a calibration adapter. The two Permanent Link adapters are connected to the ends of the cable run to be tested, in order to measure the actual performance of the connection. The reference cable serves as a comparison standard to calibrate the measuring instruments against a known reference. The calibration adapter enables calibration of the measurement system to minimise systematic errors and ensure the accuracy of measurement results. These components are necessary to perform measurements in accordance with applicable standards.
Technology explained simply
The measurement is performed in the frequency range up to 2000 MHz, which corresponds to the requirements of the CAT 8.1 standard category. This frequency range is necessary to check the performance of modern network cables at high data rates. The use of RJ45 connectors ensures compatibility with common network devices and cables. The measurement is performed via the cable itself, with the adapters capturing signals directly at the endpoints, without additional plug connections in the measurement path. This avoids error sources that could arise from additional connections.
Compatibility and accessories
The test adapter is specifically designed for use with network testers that support CAT 8.1 standard requirements. It is not intended for other categories such as CAT 6A or CAT 7A, as the frequency and impedance requirements differ. Compatibility is oriented towards devices that perform Permanent Link measurements according to applicable standards. The kit is to be used as a unit, with all components working together to enable correct measurement.
Installation and mounting
Installation is carried out by simply connecting the Permanent Link adapters to the ends of the cable run to be tested. The adapters are connected directly to the RJ45 plug connections, with the connection needing to be mechanically stable to avoid measurement errors. The reference cable and calibration adapter are used according to the instructions of the measuring device to perform calibration and referencing. The exact procedure depends on the software of the measuring device used.
The use of individual components without the complete kit is not intended and may lead to inaccurate measurement results.
Advantages in operation
The use of the Permanent Link test adapter enables precise and reliable evaluation of cable quality. The measurement is performed directly at the endpoints, capturing the actual performance of the connection. Calibration and referencing ensure consistent results that are comparable with other measurements. This is particularly important for the installation and maintenance of high-speed networks, where high reliability of cabling is required. The measurement is performed without additional plug connections, which increases accuracy and minimises error sources.
| General | |
| Frequency range | 2000 MHz |
| Connection | RJ45 |
| Cable category | CAT 8.1 |
| Scope of delivery | 2 Permanent Link Adapters, reference cable, calibration adapter |
Questions & answers
What is the delivery time of Softing IT Networks WX_AD_81_PL2,228264 Softing WireXpert copper accessories: RJ45 CAT 8.1 Permanent Link test adapter (1 kit)?
The article Softing IT Networks WX_AD_81_PL2,228264 Softing WireXpert copper accessories: RJ45 CAT 8.1 Permanent Link test adapter (1 kit) is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Softing IT Networks WX_AD_81_PL2,228264 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Softing IT Networks WX_AD_81_PL2,228264 Softing WireXpert copper accessories: RJ45 CAT 8.1 Permanent Link test adapter (1 kit) always at the best possible price. We can give you a discount of 2% on Softing IT Networks WX_AD_81_PL2,228264 Softing WireXpert copper accessories: RJ45 CAT 8.1 Permanent Link test adapter (1 kit) if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

