Ses-Sterling 03740160004C PLIO SNAP+ PS-12 C YE
|
25,12 EUR |
|
|
( 29,89 EUR incl. VAT ) ≈ £21.00 | ≈ $27.96 plus delivery charges: 55,00 € |
|
| Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline | |
| Lieske Part No.: | 804215 |
|---|---|
| Mfg Part No: | 03740160004C |
| UPC/EAN: | 3597470075302 |
| Weight: | 0.075 kg |
Product information for Ses-Sterling 03740160004C:
The PLIO SNAP+ PS-12 C" marker from Ses-Sterling is a cable labelling system specifically developed for labelling cables in the field of electrical and IT technology. Labelling is performed using pre-loaded carrier rods equipped with yellow markers made of POM material. Each marker features the black print "C and is designed for cables with an outer diameter of 4.5 to 6.0 mm and a cable cross-section of 4.0 to 6.0 mm². The packaging unit includes 12 pre-loaded carrier rods, containing a total of 300 markers. Unloaded carrier rods are also available, with the yellow colour of the carrier rods enabling visual differentiation.
Cable labelling is a central component of structured cabling, enabling cables to be uniquely identified during operation. The PLIO SNAP+ PS-30,5 cm ( 12 inch )C" supports quick and secure labelling, particularly in installations with high cable volumes. The markers are made of POM (Polyoxymethylene), a thermoplastic material known for its high strength, heat resistance, and chemical resistance. This material quality ensures long service life and reliability under industrial conditions.
Markers with the print C" are used for unique cable identification, for example in electrical installations, where "C may denote a specific function, phase, or cable category. The yellow colour of the carrier rods supports visual assignment, especially in environments with multiple labelling systems. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm, making them suitable for medium-sized cables in power and low-voltage technology.
POM material offers high mechanical stability and is resistant to wear, protecting the markers even under harsh operating conditions. The use of POM ensures that the labelling does not peel off or fade, guaranteeing long-term readability. The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations.
The packaging unit contains 12 pre-loaded carrier rods with a total of 300 markers. The carrier rods are supplied in a bag weighing 75 g (0.075 kg). The packaging is designed to protect the markers from damage during transport and storage. The delivery includes no additional tools or documentation; the markers are ready for immediate use.
Compatibility is provided for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The markers are designed for use with the PLIO SNAP+ system, enabling quick and secure attachment. The yellow colour of the carrier rods supports visual differentiation within a labelling system, especially when multiple colours are used for different cable groups.
Installation is performed by simply sliding the markers onto the cables, with the marker shape ensuring secure fixation. The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement. No additional tools or adhesives are required for use.
Operational benefits include fast and clear labelling, which simplifies maintenance, servicing, and fault diagnosis in electrical installations. The clear labelling with the letter "C" enables structured documentation and reduces errors during installation or repair. The material quality ensures high durability, keeping the markers readable over long periods even in demanding environments.
The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems. The yellow colour of the carrier rods supports visual assignment, especially in environments with multiple labelling systems. The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations.
The markers are ready for immediate use without requiring additional components or tools. The packaging contains exclusively the 12 pre-loaded carrier rods with a total of 300 markers.
Technical features include the yellow colour, the black print "C", the POM material, adaptation to cable outer diameters of 4.5 to 6.0 mm and cable cross-sections of 4.0 to 6.0 mm². The packaging unit weighs 75 g and contains 300 markers on 12 carrier rods. The markers are designed for indoor use and offer high mechanical stability due to the POM material.
Labelling is performed via the PLIO SNAP+ system, enabling quick and secure attachment. The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement. No additional tools or adhesives are required for use.
Applications include labelling cables in electrical installations, IT infrastructures, building technology, and industrial plants. The markers are particularly suitable for applications requiring clear and durable labelling to avoid errors during installation or maintenance. The yellow colour of the carrier rods supports visual differentiation within a labelling system.
The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations. The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems.
Functions and equipment in detail include the loading of carrier rods with 300 markers, each featuring the black print "C". The carrier rods are yellow and made of POM, ensuring high mechanical stability and durability. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The packaging unit weighs 75 g and contains 12 pre-loaded carrier rods.
The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement. No additional tools or adhesives are required for use. Labelling is performed via the PLIO SNAP+ system, enabling quick and secure attachment.
Compatibility and accessories are provided for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The markers are designed for the PLIO SNAP+ system, enabling quick and secure attachment. The yellow colour of the carrier rods supports visual differentiation within a labelling system.
Installation and mounting are performed by simply sliding the markers onto the cables. The marker shape ensures secure fixation without additional tools or adhesives. The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement.
Operational advantages lie in fast and clear labelling, which simplifies maintenance, servicing, and fault diagnosis in electrical installations. The clear labelling with the letter "C" enables structured documentation and reduces errors during installation or repair. The material quality ensures high durability, keeping the markers readable over long periods even in demanding environments.
The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems. The yellow colour of the carrier rods supports visual assignment, especially in environments with multiple labelling systems. The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations.
Technology explained simply shows that the markers are made of POM (Polyoxymethylene), a robust plastic known for its high strength and heat resistance. The yellow colour of the carrier rods serves visual differentiation. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and offer mechanical fixation without adhesive. The "C" marking is printed in black and remains readable throughout the marker's service life.
The packaging unit contains 12 pre-loaded carrier rods with a total of 300 markers. The carrier rods are supplied in a bag weighing 75 g (0.075 kg). The markers are ready for immediate use without requiring additional tools or documentation.
Applications include labelling cables in electrical installations, IT infrastructures, building technology, and industrial plants. The markers are particularly suitable for applications requiring clear and durable labelling to avoid errors during installation or maintenance. The yellow colour of the carrier rods supports visual differentiation within a labelling system.
The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations. The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems.
Functions and equipment in detail include the loading of carrier rods with 300 markers, each featuring the black print "C". The carrier rods are yellow and made of POM, ensuring high mechanical stability and durability. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The packaging unit weighs 75 g and contains 12 pre-loaded carrier rods.
The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement. No additional tools or adhesives are required for use. Labelling is performed via the PLIO SNAP+ system, enabling quick and secure attachment.
Compatibility and accessories are provided for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The markers are designed for the PLIO SNAP+ system, enabling quick and secure attachment. The yellow colour of the carrier rods supports visual differentiation within a labelling system.
Installation and mounting are performed by simply sliding the markers onto the cables. The marker shape ensures secure fixation without additional tools or adhesives. The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement.
Operational advantages lie in fast and clear labelling, which simplifies maintenance, servicing, and fault diagnosis in electrical installations. The clear labelling with the letter "C" enables structured documentation and reduces errors during installation or repair. The material quality ensures high durability, keeping the markers readable over long periods even in demanding environments.
The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems. The yellow colour of the carrier rods supports visual assignment, especially in environments with multiple labelling systems. The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations.
Technology explained simply shows that the markers are made of POM (Polyoxymethylene), a robust plastic known for its high strength and heat resistance. The yellow colour of the carrier rods serves visual differentiation. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and offer mechanical fixation without adhesive. The "C" marking is printed in black and remains readable throughout the marker's service life.
The packaging unit contains 12 pre-loaded carrier rods with a total of 300 markers. The carrier rods are supplied in a bag weighing 75 g (0.075 kg). The markers are ready for immediate use without requiring additional tools or documentation.
Cable labelling is a central component of structured cabling, enabling cables to be uniquely identified during operation. The PLIO SNAP+ PS-30,5 cm ( 12 inch )C" supports quick and secure labelling, particularly in installations with high cable volumes. The markers are made of POM (Polyoxymethylene), a thermoplastic material known for its high strength, heat resistance, and chemical resistance. This material quality ensures long service life and reliability under industrial conditions.
Markers with the print C" are used for unique cable identification, for example in electrical installations, where "C may denote a specific function, phase, or cable category. The yellow colour of the carrier rods supports visual assignment, especially in environments with multiple labelling systems. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm, making them suitable for medium-sized cables in power and low-voltage technology.
POM material offers high mechanical stability and is resistant to wear, protecting the markers even under harsh operating conditions. The use of POM ensures that the labelling does not peel off or fade, guaranteeing long-term readability. The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations.
The packaging unit contains 12 pre-loaded carrier rods with a total of 300 markers. The carrier rods are supplied in a bag weighing 75 g (0.075 kg). The packaging is designed to protect the markers from damage during transport and storage. The delivery includes no additional tools or documentation; the markers are ready for immediate use.
Compatibility is provided for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The markers are designed for use with the PLIO SNAP+ system, enabling quick and secure attachment. The yellow colour of the carrier rods supports visual differentiation within a labelling system, especially when multiple colours are used for different cable groups.
Installation is performed by simply sliding the markers onto the cables, with the marker shape ensuring secure fixation. The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement. No additional tools or adhesives are required for use.
Operational benefits include fast and clear labelling, which simplifies maintenance, servicing, and fault diagnosis in electrical installations. The clear labelling with the letter "C" enables structured documentation and reduces errors during installation or repair. The material quality ensures high durability, keeping the markers readable over long periods even in demanding environments.
The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems. The yellow colour of the carrier rods supports visual assignment, especially in environments with multiple labelling systems. The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations.
The markers are ready for immediate use without requiring additional components or tools. The packaging contains exclusively the 12 pre-loaded carrier rods with a total of 300 markers.
Technical features include the yellow colour, the black print "C", the POM material, adaptation to cable outer diameters of 4.5 to 6.0 mm and cable cross-sections of 4.0 to 6.0 mm². The packaging unit weighs 75 g and contains 300 markers on 12 carrier rods. The markers are designed for indoor use and offer high mechanical stability due to the POM material.
Labelling is performed via the PLIO SNAP+ system, enabling quick and secure attachment. The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement. No additional tools or adhesives are required for use.
Applications include labelling cables in electrical installations, IT infrastructures, building technology, and industrial plants. The markers are particularly suitable for applications requiring clear and durable labelling to avoid errors during installation or maintenance. The yellow colour of the carrier rods supports visual differentiation within a labelling system.
The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations. The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems.
Functions and equipment in detail include the loading of carrier rods with 300 markers, each featuring the black print "C". The carrier rods are yellow and made of POM, ensuring high mechanical stability and durability. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The packaging unit weighs 75 g and contains 12 pre-loaded carrier rods.
The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement. No additional tools or adhesives are required for use. Labelling is performed via the PLIO SNAP+ system, enabling quick and secure attachment.
Compatibility and accessories are provided for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The markers are designed for the PLIO SNAP+ system, enabling quick and secure attachment. The yellow colour of the carrier rods supports visual differentiation within a labelling system.
Installation and mounting are performed by simply sliding the markers onto the cables. The marker shape ensures secure fixation without additional tools or adhesives. The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement.
Operational advantages lie in fast and clear labelling, which simplifies maintenance, servicing, and fault diagnosis in electrical installations. The clear labelling with the letter "C" enables structured documentation and reduces errors during installation or repair. The material quality ensures high durability, keeping the markers readable over long periods even in demanding environments.
The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems. The yellow colour of the carrier rods supports visual assignment, especially in environments with multiple labelling systems. The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations.
Technology explained simply shows that the markers are made of POM (Polyoxymethylene), a robust plastic known for its high strength and heat resistance. The yellow colour of the carrier rods serves visual differentiation. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and offer mechanical fixation without adhesive. The "C" marking is printed in black and remains readable throughout the marker's service life.
The packaging unit contains 12 pre-loaded carrier rods with a total of 300 markers. The carrier rods are supplied in a bag weighing 75 g (0.075 kg). The markers are ready for immediate use without requiring additional tools or documentation.
Applications include labelling cables in electrical installations, IT infrastructures, building technology, and industrial plants. The markers are particularly suitable for applications requiring clear and durable labelling to avoid errors during installation or maintenance. The yellow colour of the carrier rods supports visual differentiation within a labelling system.
The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations. The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems.
Functions and equipment in detail include the loading of carrier rods with 300 markers, each featuring the black print "C". The carrier rods are yellow and made of POM, ensuring high mechanical stability and durability. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The packaging unit weighs 75 g and contains 12 pre-loaded carrier rods.
The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement. No additional tools or adhesives are required for use. Labelling is performed via the PLIO SNAP+ system, enabling quick and secure attachment.
Compatibility and accessories are provided for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The markers are designed for the PLIO SNAP+ system, enabling quick and secure attachment. The yellow colour of the carrier rods supports visual differentiation within a labelling system.
Installation and mounting are performed by simply sliding the markers onto the cables. The marker shape ensures secure fixation without additional tools or adhesives. The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement.
Operational advantages lie in fast and clear labelling, which simplifies maintenance, servicing, and fault diagnosis in electrical installations. The clear labelling with the letter "C" enables structured documentation and reduces errors during installation or repair. The material quality ensures high durability, keeping the markers readable over long periods even in demanding environments.
The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems. The yellow colour of the carrier rods supports visual assignment, especially in environments with multiple labelling systems. The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations.
Technology explained simply shows that the markers are made of POM (Polyoxymethylene), a robust plastic known for its high strength and heat resistance. The yellow colour of the carrier rods serves visual differentiation. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and offer mechanical fixation without adhesive. The "C" marking is printed in black and remains readable throughout the marker's service life.
The packaging unit contains 12 pre-loaded carrier rods with a total of 300 markers. The carrier rods are supplied in a bag weighing 75 g (0.075 kg). The markers are ready for immediate use without requiring additional tools or documentation.
| General | |
| Colour | Yellow |
Questions & answers
What is the delivery time of Ses-Sterling 03740160004C PLIO SNAP+ PS-12 C YE ?
The article Ses-Sterling 03740160004C PLIO SNAP+ PS-12 C YE is currently in stock
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Ses-Sterling 03740160004C to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Ses-Sterling 03740160004C PLIO SNAP+ PS-12 C YE always at the best possible price. We can give you a discount of 2% on Ses-Sterling 03740160004C PLIO SNAP+ PS-12 C YE if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Altenative Products for Ses-Sterling 03740160004C PLIO SNAP+ PS-12 C YE
 |
Ses-Sterling 03740160004- PLIO SNAP+ PS-12 YE
The PLIO SNAP+ PS-30,5 cm ( 12 inch )-" marker from Ses-Sterling is a cable identification system for the unambiguous identification of cables in electrical and IT applications. It is used for visual ... Lieske Part No.: 804194 Mfg Part No: 03740160004- |
25,12 EUR
 ≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004 PLIO SNAP+ PS-12 YE *
The PLIO SNAP+ PS-12 marker from Ses-Sterling is a cable labelling system specifically designed for labelling cables with outer diameters of 4.5 to 6.0 mm and cable cross-sections of 4.0 to 6.0 mm². Lieske Part No.: 804195 Mfg Part No: 03740160004 |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004. PLIO SNAP+ PS-12 YE
The PLIO SNAP+ PS-30,5 cm ( 12 inch )." marker from Ses-Sterling is a cable marking system specifically designed for marking cables with outer diameters between 4.5 and 6.0 mm and cable cross-sections ... Lieske Part No.: 804196 Mfg Part No: 03740160004. |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004/ PLIO SNAP+ PS-12 YE
The PLIO SNAP+ PS-30,5 cm ( 12 inch )/" marker from Ses-Sterling is a cable identification system for the unambiguous identification of cables in electrical and IT applications. It is designed for ... Lieske Part No.: 804198 Mfg Part No: 03740160004/ |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004: PLIO SNAP+ PS-12 YE 03740160004
Lieske Part No.: 804199 Mfg Part No: 03740160004: |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
|
|
Ses-Sterling 03740160004; PLIO SNAP+ PS-12 YE 03740160004
Lieske Part No.: 804200 Mfg Part No: 03740160004; |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004 PLIO SNAP+ PS-12 + YE +
The PLIO SNAP+ PS-30,5 cm ( 12 inch )+" marker from Ses-Sterling is a cable marking system, specifically developed for clear and permanent labelling of cables in electrical and IT applications. The ... Lieske Part No.: 804202 Mfg Part No: 03740160004 |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
|
|
Ses-Sterling 03740160004= PLIO SNAP+ PS-12 YE
Lieske Part No.: 804203 Mfg Part No: 03740160004= |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 037401600040 PLIO SNAP+ PS-12 0 YE
The Ses-Sterling marker PLIO SNAP+ PS-12 0 cm ( 0 inch ) is a cable identification system for the unambiguous identification of cables in electrical and IT applications. It is used for visual marking ... Lieske Part No.: 804205 Mfg Part No: 037401600040 |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 037401600049 PLIO SNAP+ PS-12 9 YE
The Ses-Sterling marker PLIO SNAP+ PS-30,5 cm ( 12 inch )22,9 cm ( 9 inch ) is a cable identification system for use in electrical and IT technology. It serves for the unambiguous identification of ... Lieske Part No.: 804206 Mfg Part No: 037401600049 |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004A PLIO SNAP+ PS-12 A YE
The PLIO SNAP+ PS-12 A" marker from Ses-Sterling is a cable identification system specifically developed for the clear identification of cables in electrical and IT installations. Identification is ... Lieske Part No.: 804207 Mfg Part No: 03740160004A |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004ALP PLIO SNAP+ PS-12 A-Z YE
Lieske Part No.: 804209 Mfg Part No: 03740160004ALP |
600,83 EUR
≈ £502.29 | ≈ $668.72
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004ALT PLIO SNAP+ PS-12 A.C. YE
The PLIO SNAP+ PS-12 A.C. marker from Ses-Sterling is a cable identification system for use in electrical and IT technology. It is designed for the clear identification of cables and lines, ... Lieske Part No.: 804210 Mfg Part No: 03740160004ALT |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004B PLIO SNAP+ PS-12 B YE
The PLIO SNAP+ PS-30,5 cm ( 12 inch )B" marker from Ses-Sterling is a cable identification system specifically developed for the clear identification of cables in electrical and IT installations. Lieske Part No.: 804213 Mfg Part No: 03740160004B |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling PLIO SNAP+ PS-12 rectangular connector yellow 03740160004CRE
The PLIO SNAP+ PS-12 Rect.curr. marker from Ses-Sterling is a cable identification system for use in electrical and IT technology. It is designed for the clear identification of cables and wires to ... Lieske Part No.: 804217 Mfg Part No: 03740160004CRE |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004D PLIO SNAP+ PS-12 D YE
The PLIO SNAP+ PS-12 D" marker from Ses-Sterling is a cable labelling system, specifically designed for labelling cables in the field of electrical and IT technology. The markers are yellow in colour ... Lieske Part No.: 804219 Mfg Part No: 03740160004D |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004E PLIO SNAP+ PS-12 E YE
The PLIO SNAP+ PS-30,5 cm ( 12 inch )E" marker from Ses-Sterling is a cable identification system specifically developed for clear and permanent labelling of cables in electrical and IT applications. Lieske Part No.: 804220 Mfg Part No: 03740160004E |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004ETO PLIO SNAP+ PS-12 Star YE
The Ses-Sterling marker PLIO SNAP+ PS-12 Star is a cable labelling system, specifically designed for labelling cables with outer diameters between 4.5 and 6.0 mm and cable cross-sections from 4.0 to 6. Lieske Part No.: 804223 Mfg Part No: 03740160004ETO |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling PLIO SNAP+ PS-12 vertical arrow yellow 03740160004FV
The PLIO SNAP+ PS-12 Vert. arrow marker from Ses-Sterling is a cable identification system for use in electrical and IT technology. It serves for the unambiguous identification of cables and lines, ... Lieske Part No.: 804226 Mfg Part No: 03740160004FV |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004G PLIO SNAP+ PS-12 G YE
The PLIO SNAP+ PS-30,5 cm ( 12 inch )G" marker from Ses-Sterling is a cable identification system specifically developed for the clear identification of cables in electrical and IT applications. Lieske Part No.: 804227 Mfg Part No: 03740160004G |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004H PLIO SNAP+ PS-12 H YE
The Ses-Sterling marker PLIO SNAP+ PS-12 H" is a cable identification system for use in electrical and IT technology. It is intended for the unambiguous identification of cables and lines in the field ... Lieske Part No.: 804229 Mfg Part No: 03740160004H |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004I PLIO SNAP+ PS-12 I YE
The PLIO SNAP+ PS-12 I" marker from Ses-Sterling is a cable identification system specifically developed for the clear identification of cables in electrical and IT applications. The markers are ... Lieske Part No.: 804230 Mfg Part No: 03740160004I |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004J PLIO SNAP+ PS-12 J YE
The PLIO SNAP+ PS-12 J" marker from Ses-Sterling is a cable identification system for the unambiguous identification of cables in electrical and IT applications. It is designed for visual marking of ... Lieske Part No.: 804231 Mfg Part No: 03740160004J |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004K PLIO SNAP+ PS-12 K YE
The PLIO SNAP+ PS-12 K" marker from Ses-Sterling is a cable marking system specifically developed for marking cables in the field of electrical and IT technology. The markers are yellow in colour and ... Lieske Part No.: 804233 Mfg Part No: 03740160004K |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004L PLIO SNAP+ PS-12 L YE
The PLIO SNAP+ PS-12 L" marker from Ses-Sterling is a cable labelling system, specifically designed for clear and permanent marking of cables in the field of electrical and IT installations. It is ... Lieske Part No.: 804234 Mfg Part No: 03740160004L |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004L1 PLIO SNAP+ PS-12 L1 YE
The PLIO SNAP+ PS-12 L2,5 cm ( 1 inch ) marker from Ses-Sterling is a cable marking system specifically designed for marking cables with outer diameters between 4.5 and 6.0 mm and cable cross-sections ... Lieske Part No.: 804235 Mfg Part No: 03740160004L1 |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004L2 PLIO SNAP+ PS-12 L2 YE
The PLIO SNAP+ PS-12 L5,1 cm ( 2 inch ) marker from Ses-Sterling is a cable identification system for use in electrical and IT technology. It is designed for the clear identification of cables and ... Lieske Part No.: 804238 Mfg Part No: 03740160004L2 |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004L3 PLIO SNAP+ PS-12 L3 YE
The PLIO SNAP+ PS-12 L7,6 cm ( 3 inch ) marker from Ses-Sterling is a cable identification system for use in electrical and IT technology. It is designed for the clear identification of cables and ... Lieske Part No.: 804240 Mfg Part No: 03740160004L3 |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004M PLIO SNAP+ PS-12 M YE
The PLIO SNAP+ PS-12 M" marker from Ses-Sterling is a cable identification system for use in electrical and IT technology. It is designed for the clear identification of cables and lines, enabling ... Lieske Part No.: 804242 Mfg Part No: 03740160004M |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|
 |
Ses-Sterling 03740160004MAS PLIO SNAP+ PS-12 Mass YE
The Ses-Sterling marker PLIO SNAP+ PS-12 Mass is a cable labelling system, specifically designed for clear identification of cables in electrical and IT applications. The markers are yellow in colour ... Lieske Part No.: 804243 Mfg Part No: 03740160004MAS |
25,12 EUR
≈ £21.00 | ≈ $27.96
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
|