General
Colour	Yellow

The PLIO SNAP+ PS-12 C" marker from Ses-Sterling is a cable labelling system specifically developed for labelling cables in the field of electrical and IT technology. Labelling is performed using pre-loaded carrier rods equipped with yellow markers made of POM material. Each marker features the black print "C and is designed for cables with an outer diameter of 4.5 to 6.0 mm and a cable cross-section of 4.0 to 6.0 mm². The packaging unit includes 12 pre-loaded carrier rods, containing a total of 300 markers. Unloaded carrier rods are also available, with the yellow colour of the carrier rods enabling visual differentiation.

Cable labelling is a central component of structured cabling, enabling cables to be uniquely identified during operation. The PLIO SNAP+ PS-30,5 cm ( 12 inch )C" supports quick and secure labelling, particularly in installations with high cable volumes. The markers are made of POM (Polyoxymethylene), a thermoplastic material known for its high strength, heat resistance, and chemical resistance. This material quality ensures long service life and reliability under industrial conditions.

Markers with the print C" are used for unique cable identification, for example in electrical installations, where "C may denote a specific function, phase, or cable category. The yellow colour of the carrier rods supports visual assignment, especially in environments with multiple labelling systems. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm, making them suitable for medium-sized cables in power and low-voltage technology.

POM material offers high mechanical stability and is resistant to wear, protecting the markers even under harsh operating conditions. The use of POM ensures that the labelling does not peel off or fade, guaranteeing long-term readability. The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations.

The packaging unit contains 12 pre-loaded carrier rods with a total of 300 markers. The carrier rods are supplied in a bag weighing 75 g (0.075 kg). The packaging is designed to protect the markers from damage during transport and storage. The delivery includes no additional tools or documentation; the markers are ready for immediate use.

Compatibility is provided for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The markers are designed for use with the PLIO SNAP+ system, enabling quick and secure attachment. The yellow colour of the carrier rods supports visual differentiation within a labelling system, especially when multiple colours are used for different cable groups.

Installation is performed by simply sliding the markers onto the cables, with the marker shape ensuring secure fixation. The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement. No additional tools or adhesives are required for use.

Operational benefits include fast and clear labelling, which simplifies maintenance, servicing, and fault diagnosis in electrical installations. The clear labelling with the letter "C" enables structured documentation and reduces errors during installation or repair. The material quality ensures high durability, keeping the markers readable over long periods even in demanding environments.

The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems. The yellow colour of the carrier rods supports visual assignment, especially in environments with multiple labelling systems. The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations.

The markers are ready for immediate use without requiring additional components or tools. The packaging contains exclusively the 12 pre-loaded carrier rods with a total of 300 markers.

Technical features include the yellow colour, the black print "C", the POM material, adaptation to cable outer diameters of 4.5 to 6.0 mm and cable cross-sections of 4.0 to 6.0 mm². The packaging unit weighs 75 g and contains 300 markers on 12 carrier rods. The markers are designed for indoor use and offer high mechanical stability due to the POM material.

Labelling is performed via the PLIO SNAP+ system, enabling quick and secure attachment. The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement. No additional tools or adhesives are required for use.

Applications include labelling cables in electrical installations, IT infrastructures, building technology, and industrial plants. The markers are particularly suitable for applications requiring clear and durable labelling to avoid errors during installation or maintenance. The yellow colour of the carrier rods supports visual differentiation within a labelling system.

The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations. The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems.

Functions and equipment in detail include the loading of carrier rods with 300 markers, each featuring the black print "C". The carrier rods are yellow and made of POM, ensuring high mechanical stability and durability. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The packaging unit weighs 75 g and contains 12 pre-loaded carrier rods.

The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement. No additional tools or adhesives are required for use. Labelling is performed via the PLIO SNAP+ system, enabling quick and secure attachment.

Compatibility and accessories are provided for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The markers are designed for the PLIO SNAP+ system, enabling quick and secure attachment. The yellow colour of the carrier rods supports visual differentiation within a labelling system.

Installation and mounting are performed by simply sliding the markers onto the cables. The marker shape ensures secure fixation without additional tools or adhesives. The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement.

Operational advantages lie in fast and clear labelling, which simplifies maintenance, servicing, and fault diagnosis in electrical installations. The clear labelling with the letter "C" enables structured documentation and reduces errors during installation or repair. The material quality ensures high durability, keeping the markers readable over long periods even in demanding environments.

The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems. The yellow colour of the carrier rods supports visual assignment, especially in environments with multiple labelling systems. The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations.

Technology explained simply shows that the markers are made of POM (Polyoxymethylene), a robust plastic known for its high strength and heat resistance. The yellow colour of the carrier rods serves visual differentiation. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and offer mechanical fixation without adhesive. The "C" marking is printed in black and remains readable throughout the marker's service life.

The packaging unit contains 12 pre-loaded carrier rods with a total of 300 markers. The carrier rods are supplied in a bag weighing 75 g (0.075 kg). The markers are ready for immediate use without requiring additional tools or documentation.

Applications include labelling cables in electrical installations, IT infrastructures, building technology, and industrial plants. The markers are particularly suitable for applications requiring clear and durable labelling to avoid errors during installation or maintenance. The yellow colour of the carrier rods supports visual differentiation within a labelling system.

The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations. The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems.

Functions and equipment in detail include the loading of carrier rods with 300 markers, each featuring the black print "C". The carrier rods are yellow and made of POM, ensuring high mechanical stability and durability. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The packaging unit weighs 75 g and contains 12 pre-loaded carrier rods.

The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement. No additional tools or adhesives are required for use. Labelling is performed via the PLIO SNAP+ system, enabling quick and secure attachment.

Compatibility and accessories are provided for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The markers are designed for the PLIO SNAP+ system, enabling quick and secure attachment. The yellow colour of the carrier rods supports visual differentiation within a labelling system.

Installation and mounting are performed by simply sliding the markers onto the cables. The marker shape ensures secure fixation without additional tools or adhesives. The markers are not self-adhesive but mechanically fixed, allowing for repeated use and easy replacement.

Operational advantages lie in fast and clear labelling, which simplifies maintenance, servicing, and fault diagnosis in electrical installations. The clear labelling with the letter "C" enables structured documentation and reduces errors during installation or repair. The material quality ensures high durability, keeping the markers readable over long periods even in demanding environments.

The packaging unit is suitable for use in workshops, assembly operations, or during installation of cabling systems. The yellow colour of the carrier rods supports visual assignment, especially in environments with multiple labelling systems. The markers are designed for indoor use, with the material also offering limited resistance to moisture and temperature fluctuations.

Technology explained simply shows that the markers are made of POM (Polyoxymethylene), a robust plastic known for its high strength and heat resistance. The yellow colour of the carrier rods serves visual differentiation. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and offer mechanical fixation without adhesive. The "C" marking is printed in black and remains readable throughout the marker's service life.

The packaging unit contains 12 pre-loaded carrier rods with a total of 300 markers. The carrier rods are supplied in a bag weighing 75 g (0.075 kg). The markers are ready for immediate use without requiring additional tools or documentation.