Ses-Sterling 03740160004J PLIO SNAP+ PS-12 J YE content_copy

The PLIO SNAP+ PS-12 J" marker from Ses-Sterling is a cable identification system for the unambiguous identification of cables in electrical and IT applications. It is designed for visual marking of cables with an outer diameter of 4.5 to 6.0 mm and a cable cross-section of 4.0 to 6.0 mm². The markers are yellow in colour and feature a black print with the marking "J. The product is supplied in a packaging unit containing 12 pre-loaded carrier rods, with a total of 300 markers per bag. The carrier rods are made of POM (polyoxymethylene), a robust plastic known for its high strength and weather resistance. The yellow colour of the carrier rods enables quick visual identification in use, especially in complex cabling systems.

Cable identification is a central component of structured cabling to avoid errors during installation, maintenance or repair. The PLIO SNAP+ PS-12 J" is specifically designed for use in electrical and data cabling systems where clear and durable labelling is required. The markers are available in an unmarked version, meaning they are supplied without pre-printed labelling; however, in this case, they are pre-loaded with the marking "J. The packaging unit is supplied as a bag with a weight of 75 g.

Functions and equipment in detail include the use of POM as material, which offers high mechanical load capacity and chemical resistance. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm, making them suitable for a wide range of standard cables in electrical and data cabling applications. The marking "J" is printed in black, providing high contrast against the yellow carrier rod and ensuring readability even in low light conditions. The carrier rods are designed to be easily and securely wrapped around the cable without requiring additional tools.

Technology explained simply refers to the material choice of POM, known for its high strength, heat resistance and abrasion resistance. These properties make the marker suitable for use in industrial and technical environments where mechanical stress and environmental influences may occur. The yellow colour of the carrier rods serves not only for visual identification but can also be used as a colour code for specific cable types or functions in certain applications. The marking "J" is permanently applied and remains legible even under prolonged exposure to temperature, humidity or mechanical stress.

Compatibility and accessories refers to the use of the marker with cables within the specified diameter and cross-section range. The markers are not specific to any particular cable brand or technology, but are universally applicable. The packaging unit contains exclusively the 12 pre-loaded carrier rods with a total of 300 markers.

Mounting and installation is carried out by simply wrapping the carrier rod around the cable. The marker's design allows for secure fastening without additional tools. The markers are dimensioned to be wrapped around the cable without risk of cracking or deformation. Installation is performed directly on the cable, with the marking "J" facing outward to enable quick identification. The mounting process is quick and requires no special cable preparation.

Advantages in operation lie in the combination of robust material, high readability and easy handling. The use of POM ensures a long service life for the markers, even under industrial conditions. The yellow colour and black print "J" ensure clear visibility, facilitating maintenance and fault diagnosis. The packaging unit with 300 markers provides sufficient quantity for larger projects, increasing cost-effectiveness in use. The markers are suitable for use in electrical and data cabling systems where unambiguous identification is required.

The markers are specifically designed for use in structured cabling systems where clear and durable labelling is required. The packaging unit contains 12 pre-loaded carrier rods with a total of 300 markers, suitable for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The carrier rods are made of POM and are yellow in colour, with the marking "J" printed in black. Mounting is done by simply wrapping the carrier rod around the cable, without requiring additional tools. The markers are suitable for use in electrical and data cabling systems where unambiguous identification is required.

General
Colour	Yellow

---