Schneider Electric RM35S0MW speed monitor 0.1-1200 rpm 24-240 V 1 W
|
168,63 EUR 175,73 EUR |
|||||||||||
|
( 200,67 EUR incl. VAT ) ≈ £140.97 | ≈ $187.69 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 601986 | ||||||||||
| Mfg Part No: | RM35S0MW | ||||||||||
| UPC/EAN: | 3389119405256 | ||||||||||
| Weight: | 0.133 kg | ||||||||||
| Type: | RM35S0MW | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Initiators, inductive / capacitive from Schneider ElectricFurther products in category Initiators, inductive / capacitive
All products of Schneider Electric
Product information for Schneider Electric RM35S0MW:
Harmony Control. This speed monitor monitors a rotating axis for exceedance or undershoot of a set limit value (0.1-1200 rpm, 0.002-20 Hz). An additional sensor must be connected for detection (3-wire proximity switch PNP or NPN, NAMUR proximity switch, potential-free auxiliary switch, voltage signal 0-30 V). The monitoring type, the limit value and a switching delay are adjustable. An error memory can also be activated, which holds the message until a reset. The wide-voltage power supply (24-240 VAC/DC) enables universal use. The cable connection is made via screw terminals.
| Complementary | |
| rest time in memory mode | 50 ms contact S2 in memory mode on time delay; 1 s supply Un in memory mode on time delay |
| Maximum switching voltage | 250 V AC/DC |
| [Un] rated nominal voltage | 24...240 V AC/DC 50/60 Hz, non self-powered |
| Supply voltage limits | 20.4…264 V AC/DC |
| Maximum power consumption in W | 3 W DC |
| Width | 35 mm |
| Output contacts | 1 C/O |
| Contacts material | Cadmium free |
| nominal output current | 5 A |
| delay at power up | 0.05 s |
| Hysteresis | 5 % of threshold |
| Measurement accuracy | +/- 10 % of the full scale value |
| Repeat accuracy | +/- 0.5 % for input and measurement circuit; +/- 0.5 % for time delay |
| Measurement error | +/- 0.1 %/°C with temperature variation; < +/- 1 % over the whole range with voltage variation |
| Input frequency | 0.0017…20 Hz |
| Response time | 15 ms max (on crossing the threshold) |
| Polarity | Reversible polarity on DC supply |
| Threshold setting | 10...100 % |
| supply voltage for sensor | 11.5...12.5 V |
| Maximum supply current for sensors | 40 mA for < 24 V AC at 25 °C; 40 mA for < 24 V DC at 25 °C; 50 mA for 24...240 V AC; 50 mA for 24...240 V DC |
| Impulse duration | >= 5 ms high state; >= 5 ms low state |
| Input compatibility | 3-wire sensor (E1) PNP or NPN, 12 V, 50 mA; NAMUR sensor (E2), 12 V, 1.5 kOhm; Voltage input (E1), 0...30 V, 9.5 kOhm, high state >= 4.5 V low state |
| Marking | CE : EMC 89/336/EEC; CE : 73/23/EEC |
| Overvoltage category | III conforming to IEC 60664-1 |
| Insulation resistance | > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5; > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1; > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5; > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1; > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5; > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1 |
| [Ui] rated insulation voltage | 250 V conforming to IEC 60664-1 |
| operating voltage tolerance | - 15 % + 10 % Un |
| Supply frequency | 50/60 Hz +/- 10 % |
| Operating position | Any position without derating |
| Connections - terminals | Screw terminals, 1 x 0.5...1 x 4 mm² (20 AWG...11 AWG) solid without cable end; Screw terminals, 2 x 0.5...2 x 2.5 mm² (20 AWG...14 AWG) solid without cable end; Screw terminals, 1 x 0.2...1 x 2.5 mm² (24 AWG...12 AWG) flexible with cable end; Screw terminals, 2 x 0.2...2 x 1.5 mm² (24 AWG...16 AWG) flexible with cable end |
| Tightening torque | 0.6…1 N.m conforming to IEC 60947-1 |
| Housing material | Polycarbonate |
| Status LED | 1 LED green for power ON; 1 LED yellow for inhibit; 1 LED yellow for relay (R) |
| Mounting support | 35 mm symmetrical DIN rail conforming to IEC 60715 |
| Electrical durability | 100000 cycles |
| Mechanical durability | 30000000 cycles |
| Control type | Without test button |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Immunity to microbreaks | 50 ms |
| Electromagnetic compatibility | Emission standard for industrial environments conforming to IEC 61000-6-4; Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3; Immunity for industrial environments conforming to NF EN/IEC 61000-6-2 |
| Standards | NF EN 60255-6; IEC 60255-6 |
| Product certifications | C-Tick; GOST; UL; GL; CSA |
| Ambient air temperature for storage | -40…70 °C |
| Ambient air temperature for operation | -20…50 °C |
| Relative humidity | 95 % at 55 °C conforming to IEC 60068-2-30 |
| Vibration resistance | 0.35 mm (f= 5…57.6 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1; 1 gn (f= 57.6…150 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1 |
| Shock resistance | 15 gn for 11 ms conforming to IEC 60255-21-1 |
| IP degree of protection | IP20 (terminals) conforming to IEC 60529; IP30 (casing) conforming to IEC 60529 |
| Pollution degree | 3 conforming to IEC 60664-1 |
| Dielectric test voltage | 2 kV AC 50 Hz |
| Non-dissipating shock wave | 4 kV |
| Logistical informations | |
| Country of origin | ID |
| Main | |
| Range of product | Harmony Control Relays |
| Relay type | Speed control relays |
| Product or component type | Speed control relay |
| Relay name | RM35S |
| Relay monitored parameters | Overspeed; Underspeed |
| Time delay range | 0.6...60 s adjustable on energisation delay (tolerance: 0...10 % of the full scale value) |
| Switching capacity in VA | 1250 VA |
| Minimum switching current | 10 mA at 5 V DC |
| Maximum power consumption in VA | 5 VA AC |
| Measurement range | 0.05...0.5 s; 0.5...5 min; 1...10 min; 1...10 s; 0.5...5 s; 0.1...1 s; 0.1...1 min |
| Utilisation category | AC-12 conforming to IEC 60947-5-1; AC-13 conforming to IEC 60947-5-1; AC-14 conforming to IEC 60947-5-1; AC-15 conforming to IEC 60947-5-1; DC-12 conforming to IEC 60947-5-1; DC-13 conforming to IEC 60947-5-1; DC-14 conforming to IEC 60947-5-1 |
| time delay | Adjustable 0.6...60 s Ti- inhibition time delay upon startup |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 4.400 cm |
| Package 1 Width | 7.400 cm |
| Package 1 Length | 9.400 cm |
| Package 1 Weight | 133.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 48 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 7.181 kg |
Questions & answers
What is the delivery time of Schneider Electric RM35S0MW speed monitor 0.1-1200 rpm 24-240 V 1 W?
The article Schneider Electric RM35S0MW speed monitor 0.1-1200 rpm 24-240 V 1 W is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric RM35S0MW to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric RM35S0MW speed monitor 0.1-1200 rpm 24-240 V 1 W always at the best possible price. We can give you a discount of 2% on Schneider Electric RM35S0MW speed monitor 0.1-1200 rpm 24-240 V 1 W if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Schneider Electric RM35S0MW speed monitor 0.1-1200 rpm 24-240 V 1 W we can offer you a price of 162,31 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for Schneider Electric RM35S0MW speed monitor 0.1-1200 rpm 24-240 V 1 W
 |
Schneider Electric RM35TF30 multifunction phase monitor 194-528 VAC
Harmony Control. This network monitoring relay monitors three-phase networks (220-480 VAC in 6 stages) for phase sequence, phase failure, phase asymmetry (5-15%), overvoltage and undervoltage in ... Lieske Part No.: 601987 Mfg Part No: RM35TF30 |
200,45 EUR 208,89 EUR
 ≈ £167.58 | ≈ $223.10
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM17TE00 multifunction phase monitor 183-528 VAC
Harmony Control. This network monitoring relay monitors three-phase networks for phase sequence, phase failure, phase asymmetry (5-15%), overvoltage and undervoltage in window mode (2-20%). A relay ... Lieske Part No.: 602197 Mfg Part No: RM17TE00 |
159,13 EUR 165,83 EUR
≈ £133.03 | ≈ $177.11
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM22TR33 network monitoring phase sequence/failure, over- and under-voltage 380–480 V AC, 2 AC
Harmony Control. This network monitoring relay monitors three-phase networks (380-480 VAC) for phase sequence, phase failure, undervoltage and overvoltage. Two relay changeovers are available for ... Lieske Part No.: 633304 Mfg Part No: RM22TR33 |
153,42 EUR 159,89 EUR
≈ £128.26 | ≈ $170.76
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Schneider Electric RM22TG20 voltage monitoring on phase sequence/failure 208–480 VAC 2W
Harmony Control. Dieses Netzüberwachungsrelais überwacht Drehstromnetze (208-480 VAC) auf Phasenfolge und Phasenausfall. Zur Meldung sind zwei Relaiswechsler vorhanden, die bis 8 A belastbar ist. Lieske Part No.: 872768 Mfg Part No: RM22TG20 |
79,61 EUR 82,96 EUR
≈ £66.55 | ≈ $88.61
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Schneider Electric RMNF22TB30 network monitoring multifunctional 208-480 VAC
This 3-phase control relay belongs to the Harmony control relay range from Schneider Electric. This 3-phase control relay is equipped with NFC technology which allows digital operation instead of ... Lieske Part No.: 1778522 Mfg Part No: RMNF22TB30 |
149,15 EUR 155,43 EUR
≈ £124.69 | ≈ $166.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|