Schneider Electric RM17TE00 multifunction phase monitor 183-528 VAC
|
159,13 EUR 165,83 EUR |
|||||||||||
|
( 189,36 EUR incl. VAT ) ≈ £133.03 | ≈ $177.11 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 602197 | ||||||||||
| Mfg Part No: | RM17TE00 | ||||||||||
| UPC/EAN: | 3389119405058 | ||||||||||
| Weight: | 0.088 kg | ||||||||||
| Type: | RM17TE00 | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Switching units / measuring, control relay from Schneider ElectricFurther products in category Switching units / measuring, control relay
All products of Schneider Electric
Product information for Schneider Electric RM17TE00:
Harmony Control. This network monitoring relay monitors three-phase networks for phase sequence, phase failure, phase asymmetry (5-15%), overvoltage and undervoltage in window mode (2-20%). A relay changer is available for reporting, which can be loaded up to 5 A. In the event of a phase error, the output drops out without delay; in the event of asymmetry and voltage errors, a switch-off delay can be set. The settings are made using control elements on the front, which can be protected against changes under a transparent cover. Two LEDs show the status. The width is 17.5 mm and it is mounted on the top hat rail. Supply from the measuring circuit 208-480 VAC (50-60 Hz).
| Complementary | |
| [Us] rated supply voltage | self-powered |
| Supply voltage limits | 183…528 V AC |
| Supply frequency | 50/60 Hz +/- 10 % |
| Power consumption in VA | 0…22 VA at 400 V AC 50 Hz |
| Measurement range | 208...480 V AC |
| Measurement voltage limits | 183…528 V AC |
| Maximum measuring cycle | 150 ms measurement cycle as true rms value |
| Threshold adjustment voltage | 2...20 % of Un selected; -2...-17 % in the range 220 V AC; +2...+10 % in the range 480 V AC; -2...-12 % in the range 208 V AC |
| Hysteresis | 2 % |
| Adjustment of asymmetry threshold | 5...15 % of Un selected |
| Measurement error | < 0.05 %/°C with temperature variation; < 1 % over the whole range with voltage variation |
| Time delay type | Adjustable 0.1...10 s, +/- 10 % of the full scale value Tt- time delay upon fault |
| Reset time | 1500 ms time delay |
| Response time | < 200 ms (in the event of a fault) |
| Output contacts | 1 C/O |
| nominal output current | 5 A |
| Maximum switching voltage | 250 V AC |
| Switching capacity in VA | 1250 VA |
| Minimum switching current | 10 mA at 5 V DC |
| Maximum switching current | 5 A AC; 5 A DC |
| Electrical durability | 100000 cycles |
| Mechanical durability | 30000000 cycles |
| Control circuit voltage limits | - 12 % + 10 % Un |
| Control circuit frequency | 50...60 Hz +/- 10 % |
| Phase failure sensitivity | 0.7 Un |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Electromagnetic compatibility | Emission standard for industrial environments conforming to IEC 61000-6-4; Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3; Immunity for industrial environments conforming to IEC 61000-6-2 |
| Standards | IEC 60255-1 |
| Product certifications | GOST; C-Tick; CSA; UL; GL |
| Marking | CE |
| Directives | 89/336/EEC - electromagnetic compatibility; 73/23/EEC - low voltage directive |
| Ambient air temperature for storage | -40…70 °C; -40…70 °C |
| Ambient air temperature for operation | -20…50 °C |
| Relative humidity | 95 % at 55 °C conforming to IEC 60068-2-30 |
| IP degree of protection | IP20 (terminals) conforming to IEC 60529; IP30 (casing) conforming to IEC 60529 |
| Pollution degree | 3 conforming to IEC 60664-1 |
| Overvoltage category | III conforming to IEC 60664-1 |
| Dielectric test voltage | 2 kV, 1 min AC 50 Hz conforming to IEC 60255-5 |
| Insulation resistance | > 500 MOhm at 500 V DC conforming to IEC 60255-5 |
| [Ui] rated insulation voltage | 400 V conforming to IEC 60664-1 |
| Operating position | Any position without derating |
| Connections - terminals | Screw terminals, 1 x 0.5...1 x 4 mm² (20 AWG...11 AWG) solid without cable end; Screw terminals, 2 x 0.5...2 x 2.5 mm² (20 AWG...14 AWG) solid without cable end; Screw terminals, 1 x 0.2...1 x 2.5 mm² (24 AWG...12 AWG) flexible with cable end; Screw terminals, 2 x 0.2...2 x 1.5 mm² (24 AWG...16 AWG) flexible with cable end |
| Tightening torque | 0.6…1 N.m conforming to IEC 60947-1 |
| Housing material | Polycarbonate |
| Local signalling | LED (green) for power ON; LED (yellow) for relay ON |
| Mounting support | 35 mm symmetrical DIN rail conforming to IEC 60715 |
| Reliability data | MTTFd = 502.2 years; B10d = 470000 |
| Height | 90 mm; 88.9 mm |
| Width | 17.5 mm; 17.8 mm |
| Depth | 72 mm; 71.1 mm |
| Net weight | 0.08 kg; 0.08 kg |
| Logistical informations | |
| Country of origin | ID |
| Main | |
| Range of product | Harmony Control Relays |
| Relay type | Multifunction control relay |
| Product or component type | 3-phase control relay |
| Relay name | RM17TE |
| Relay monitored parameters | Undervoltage and overvoltage in window mode; Asymmetry; Phase sequence; Phase failure detection |
| Control type | Without test button |
| Contacts type and composition | 1 C/O |
| [Uc] control circuit voltage | 208...480 V |
| Product specific application | For 3-phase supply |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 2.700 cm |
| Package 1 Width | 7.700 cm |
| Package 1 Length | 9.600 cm |
| Package 1 Weight | 88.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 48 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 4.700 kg |
Questions & answers
What is the delivery time of Schneider Electric RM17TE00 multifunction phase monitor 183-528 VAC?
The article Schneider Electric RM17TE00 multifunction phase monitor 183-528 VAC is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric RM17TE00 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric RM17TE00 multifunction phase monitor 183-528 VAC always at the best possible price. We can give you a discount of 2% on Schneider Electric RM17TE00 multifunction phase monitor 183-528 VAC if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Schneider Electric RM17TE00 multifunction phase monitor 183-528 VAC we can offer you a price of 153,16 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
 |
Schneider Electric RM35JA31MW Current monitor 2–500 mA 24–240 V 2 W
Harmony Control. This current monitoring relay monitors a conductor for exceedance or undershoot of the set limit value in the range 2-500 mA. Two relay changeover switches are available for ... Lieske Part No.: 103031 Mfg Part No: RM35JA31MW |
139,17 EUR 145,04 EUR
 ≈ £116.35 | ≈ $154.90
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM35UA11MW Voltage monitor RM35-UA11MW 0.05–5 V UN24–240 V 2 W
Harmony Control. This multifunctional voltage monitor is used in direct and alternating voltage networks and enables monitoring of overshoot or undershoot of an adjustable limit value (0.05-5 VAC/DC). Lieske Part No.: 209548 Mfg Part No: RM35UA11MW |
141,07 EUR 147,02 EUR
≈ £117.93 | ≈ $157.01
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM17UB310 voltage monitor 183-528 VAC
Harmony Control. This voltage monitoring relay monitors three-phase supplies 208-480 VAC (50-60 Hz) for phase failure, as well as exceeding or falling below an adjustable limit value. A relay changer ... Lieske Part No.: 600998 Mfg Part No: RM17UB310 |
135,38 EUR 141,08 EUR
≈ £113.18 | ≈ $150.68
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM35BA10 pump monitor 1–10 A 208–480 V 1 W
Harmony Control. This monitoring relay is used to control and monitor pumps in single-phase and three-phase networks. In single-phase networks (230 VAC), monitoring for overcurrent and undercurrent is ... Lieske Part No.: 601005 Mfg Part No: RM35BA10 |
209,95 EUR 218,79 EUR
≈ £175.52 | ≈ $233.67
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM17TA00 phase monitor asymmetry 1W
Harmony Control. This network monitoring relay monitors three-phase networks for phase sequence, phase failure and phase asymmetry (5-15%). A relay changer is available for reporting, which can be ... Lieske Part No.: 601818 Mfg Part No: RM17TA00 |
137,75 EUR 143,55 EUR
≈ £115.16 | ≈ $153.32
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM35S0MW speed monitor 0.1-1200 rpm 24-240 V 1 W
Harmony Control. This speed monitor monitors a rotating axis for exceedance or undershoot of a set limit value (0.1-1200 rpm, 0.002-20 Hz). An additional sensor must be connected for detection (3-wire ... Lieske Part No.: 601986 Mfg Part No: RM35S0MW |
168,63 EUR 175,73 EUR
≈ £140.97 | ≈ $187.69
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM35TF30 multifunction phase monitor 194-528 VAC
Harmony Control. This network monitoring relay monitors three-phase networks (220-480 VAC in 6 stages) for phase sequence, phase failure, phase asymmetry (5-15%), overvoltage and undervoltage in ... Lieske Part No.: 601987 Mfg Part No: RM35TF30 |
200,45 EUR 208,89 EUR
≈ £167.58 | ≈ $223.10
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM35UB330 voltage monitor 194-528 VAC
Harmony Control. This voltage monitoring relay monitors three-phase supplies (220-480 VAC) for phase failure, as well as the mains voltage for exceeding or falling below an adjustable limit value ... Lieske Part No.: 602198 Mfg Part No: RM35UB330 |
167,20 EUR 174,24 EUR
≈ £139.78 | ≈ $186.09
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM35UB3N30 voltage monitor 114-329 VAC
Harmony Control. This voltage monitoring relay monitors three-phase supplies for phase failure, as well as the mains voltage for exceeding or falling below an adjustable limit. The neutral conductor ... Lieske Part No.: 602202 Mfg Part No: RM35UB3N30 |
190,95 EUR 198,99 EUR
≈ £159.63 | ≈ $212.53
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM35JA32MT monitoring for over- and undertolerance 24–240 V 2 W
Harmony Control. This current monitoring relay monitors a conductor for exceedance or undershoot of the set limit value (1.5-15 A). You can choose between exceedance, undershoot and overshoot and ... Lieske Part No.: 606781 Mfg Part No: RM35JA32MT |
159,60 EUR 166,32 EUR
≈ £133.43 | ≈ $177.63
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM35UA13MW Voltage monitor 15-600 V UN 24-240 V 2 W 35 x 90 x 72 mm
Harmony Control. This multifunctional voltage monitor is used in direct and alternating voltage networks and enables monitoring of overshoot or undershoot of an adjustable limit value (15-600 VAC/DC). Lieske Part No.: 611028 Mfg Part No: RM35UA13MW |
141,07 EUR 147,02 EUR
≈ £117.93 | ≈ $157.01
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM35JA32MR monitoring for over- and undertolerance 24–240 V 2 W
Harmony Control. This current monitoring relay monitors a conductor for exceedance or undershoot of the set limit value (1.5-15 A). You can choose between exceedance, undershoot and overshoot and ... Lieske Part No.: 632714 Mfg Part No: RM35JA32MR |
154,38 EUR 160,88 EUR
≈ £129.06 | ≈ $171.82
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Schneider Electric RM35JA32MW Current monitor 0.15–15 A 24–240 V 2 W
Harmony Control. This current monitoring relay monitors a conductor for exceedance or undershoot of the set limit value in the range 0.15-15 A. Two relay changeover switches are available for ... Lieske Part No.: 673020 Mfg Part No: RM35JA32MW |
139,65 EUR 145,53 EUR
≈ £116.75 | ≈ $155.43
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM35TM250MW motor temperature and phase monitor 24-240 V AC/DC 2 S
This monitoring relay is used in three-phase networks to monitor the phase sequence and phase failure and can monitor the temperature of motors with a built-in PTC sensor. A relay output with a ... Lieske Part No.: 753435 Mfg Part No: RM35TM250MW |
168,63 EUR 175,73 EUR
≈ £140.97 | ≈ $187.69
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM35HZ21FM Frequency monitor 50/60 Hz 120–277 V 2 W
Harmony Control. This mains frequency monitoring relay is used to monitor frequency fluctuations in alternating current networks 120-277 VAC with 50 Hz or 60 Hz. A separate limit value is set for the ... Lieske Part No.: 840608 Mfg Part No: RM35HZ21FM |
172,90 EUR 180,18 EUR
≈ £144.54 | ≈ $192.44
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM35UA12MW multifunction voltage monitor 1-100 V
Harmony Control. Dieser Multifunkions-Spannungswächter wird in Gleich- und Wechselspannungsnetzen eingesetzt und ermöglicht die Überwachung auf Über- oder Unterschreitung eines einstellbaren ... Lieske Part No.: 894112 Mfg Part No: RM35UA12MW |
141,07 EUR 147,02 EUR
≈ £117.93 | ≈ $157.01
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM35TM50MW phase monitor motor temperature 24-240 V AC/DC 2 S
Dieses Überwachungsrelais wird in Drehstromnetzen zur Überwachung der Phasenfolge und Phasenausfall eingesetzt und kann die Temperatur von Motoren mit eingebautem PTC-Fühler überwachen. Für die ... Lieske Part No.: 894119 Mfg Part No: RM35TM50MW |
153,90 EUR 160,38 EUR
≈ £128.66 | ≈ $171.29
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric RM35TF36 voltage monitoring Harmony control relay 480-690 VAC 3ph
Die Multifunktionsrelais RM35T der Baureihe Harmony Control ermöglichen die Überwachung von Stromversorgungskreisen in 3-Phasen-Netzen. Dieses modulare, multifunktionale 3-phasige Steuerrelais ... Lieske Part No.: 894601 Mfg Part No: RM35TF36 |
238,45 EUR 248,49 EUR
≈ £199.34 | ≈ $265.39
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
Fitting accessory for Schneider Electric RM17TE00 multifunction phase monitor 183-528 VAC
|
|
Schneider Electric RM17UB310 voltage monitor 183-528 VAC
Harmony Control. This voltage monitoring relay monitors three-phase supplies 208-480 VAC (50-60 Hz) for phase failure, as well as exceeding or falling below an adjustable limit value. A relay changer ... Lieske Part No.: 600998 Mfg Part No: RM17UB310 |
135,38 EUR 141,08 EUR
≈ £113.18 | ≈ $150.68
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric RM35TF30 multifunction phase monitor 194-528 VAC
Harmony Control. This network monitoring relay monitors three-phase networks (220-480 VAC in 6 stages) for phase sequence, phase failure, phase asymmetry (5-15%), overvoltage and undervoltage in ... Lieske Part No.: 601987 Mfg Part No: RM35TF30 |
200,45 EUR 208,89 EUR
≈ £167.58 | ≈ $223.10
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RMNF22TB30 network monitoring multifunctional 208-480 VAC
This 3-phase control relay belongs to the Harmony control relay range from Schneider Electric. This 3-phase control relay is equipped with NFC technology which allows digital operation instead of ... Lieske Part No.: 1778522 Mfg Part No: RMNF22TB30 |
149,15 EUR 155,43 EUR
≈ £124.69 | ≈ $166.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|