Rittal 9360102 RX RiLineX end module set 3-pole, overmountable content_copy

The Rittal RiLineX End Module Set, type RX 9360102, is a 3-pole end module for the modular RiLineX board. It is designed for safe and structured termination of the left and right sides of a RiLineX module board and integrates a continuous shock protection. The set is over-mountable, meaning additional devices or components can be mounted directly onto the end modules without compromising electrical safety. The end modules are made of polyamide (PA 6) and meet the requirements for flammability behaviour according to UL 94, ensuring high safety under thermal stress. The colour corresponds to RAL 35745, a dark grey tone that integrates well in industrial environments.

Applications
This end module set is specifically designed for use in modular RiLineX systems used in industrial electrical engineering, power distribution, and automation technology. It is suitable for applications with alternating voltages up to 1000 V AC and direct voltages up to 1500 V DC. The tested short-circuit withstand capability up to 65 kA makes it suitable for installations with high electrical loads. The systems are designed for use in switchgear, distribution boxes, and industrial control systems.

Functions and Equipment in Detail
The set includes a left end module and a right end module, each forming the termination of the RiLineX board. The integrated shock protection achieves at least protection class IP 2XB and can be upgraded to IP 3X, ensuring high safety against accidental contact with conductive parts. The end modules are designed for mounting on base modules of the RiLineX system, specifically for part numbers 9360110, 9360120, and 9360150. The delivery includes the required mounting materials to securely fasten the modules to the board.

Technology Explained Simply
The use of polyamide (PA 6) as a material provides high mechanical stability, heat resistance, and electrical insulation. The flammability classification UL 94 ensures that the material does not easily ignite when heated and does not propagate flame. The 3-pole configuration allows use in three-phase power supplies. The over-mountable design permits mounting of additional components, such as switches or indicator lights, directly onto the end modules, enabling efficient use of space within the enclosure.

Compatibility and Accessories
The end module set is specifically designed for use with RiLineX base modules 9360110, 9360120, and 9360150. It can be combined with various busbar cross-sections, including E-Cu busbars in dimensions 15x5 mm, 20x5 mm, 20x10 mm, 30x5 mm, and 30x10 mm, each with a length of 2400 mm. This combination enables scalable sizing of power supply, with rated currents up to 800 A. The systems are tested and certified according to IEC and UL standards, ensuring international usability.

Mounting and Installation
Mounting is done by securing the end modules to the ends of the RiLineX board using the included mounting materials. The over-mountable construction allows direct mounting of devices onto the end modules, enabling additional space utilization within the enclosure. The simple mounting and modular design allow flexible expansion and field baying of the systems.

Advantages in Operation
The RiLineX end module set provides a safe and structured termination solution for modular distribution systems. The integrated shock protection increases operational safety, while the over-mountable design efficiently utilizes space. Compatibility with various busbar cross-sections allows flexible adaptation to different current loads. Certification according to IEC and UL ensures reliability and worldwide use in industrial installations.

General
Material	Polyamide (PA 6), flammability according to UL 94
Colour	RAL 35745
Scope of delivery	Board end element left, board end element right, including fastening material
Suitable for part no.	9360110, 9360120, 9360150
Number of poles	3-pole

---