Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English
Rittal Logo

Rittal 3244710 Blue e+ filter fan 867/910 m³/h, 115 V, RAL 7035

Your rating:
Average rating
product review for Rittal 3244710 Blue e+ filter fan 867/910 m³/h, 115 V, RAL 7035
( 4 / 5 ) 5 ratings
Rittal 3244710
This image may differ from the desired article.
Rittal 3244710Rittal 3244710Rittal 3244710Rittal 3244710Rittal 3244710
180,44 EUR
( 214,72 EUR incl. VAT )
≈ £151.03  |  ≈ $198.30
plus delivery charges: 100,00 €
Delivery time from supplier's stock (ca.) 12 workdaysinfo_outline
In Stock: >50 pieces
1x Rittal 3244710 Blue e+ filter fan 867/910 m³/h, 115 V, RAL 7035
Datasheet:file_download Download
Lieske Part No.:683872
Mfg Part No: 3244710
UPC/EAN: 4028177997899
Weight:5.011 kg
Type:SK 3244.710

Product information for Rittal 3244710:

The Rittal SK 3244.710 is a filter fan for enclosure climate control, designed as a wall-mounted unit. It is used for controlled ventilation of enclosures to ensure even cooling of installed electronic components. The device is made of plastic and is available in the colour RAL 7035. The delivery includes a fully ready-to-install unit including pleated filter, which can be directly mounted on the enclosure wall. Installation is tool-free via optimised snap hooks, which speeds up and simplifies the process.

Applications

The filter fan is designed for use in industrial environments where continuous and reliable ventilation of enclosures is required. It is particularly suitable for installations operating in rooms with high dust loads or in areas with occasional splashing water. The integrated filter technology ensures that only cleaned air enters the enclosure, thus extending the service life of electronic components. The unit is designed for operation in a temperature range of -30 °C to 55 °C, making it suitable for use in environments with varying climatic conditions.

Functions and equipment in detail

The fan features diagonal fan technology with a 1~ capacitor motor, providing higher pressure stability and more consistent airflow. The diagonal discharge direction ensures more even cooling of the enclosure, preventing heat accumulation in specific areas. The airflow rate is 867 m³/h (free blowing with pleated filter) at 50 Hz and 910 m³/h at 60 Hz. When used with a matching outlet filter, the airflow rate drops to 720 m³/h (50 Hz) or 745 m³/h (60 Hz). The unit is equipped with a pleated filter, which is pre-installed at delivery and offers a high filtration grade. A new opening mechanism on the louver grille allows for easy and quick filter replacement.

Technology explained simply

The rated operating voltage is 115 V, 1~, and is designed for frequencies of 50 Hz and 60 Hz. The rated power is 120.7 W (50 Hz) or 166.1 W (60 Hz), with a maximum rated current of 1.06 A (50 Hz) or 1.47 A (60 Hz). The protection rating IP 54 is standard when using non-woven filters or pleated filters. With an additional absorber mat, the unit achieves IP 54, and with a spray hood, IP 54. The corresponding NEMA protection ratings are Type 12 (with non-woven filter/pleated filter) and Type 3, 3R, 4, 4X (with non-woven filter/pleated filter and spray hood). The sound pressure levels are 64 dB(A) (50 Hz) and 66 dB(A) (60 Hz), representing an acoustically acceptable operating noise level. The unit includes a pre-fuse rated at 6 A, which can be implemented as a fuse switch or a fuse.

Compatibility and accessories

The filter fan can be combined with various accessories to adjust protection rating or functionality. These include outlet filters in RAL 7035, replacement filter mats for filtration, spray hoods made of stainless steel, absorber mats for IP 54, and speed controllers for variable airflow. Thermostats and hygrostats can also be used for temperature and humidity control within the enclosure. Installation requires a cutout of 292 mm width and 292 mm height, with a mounting depth of 136 mm. The overall dimensions of the device are 323 mm (width) × 323 mm (height) × 156 mm (depth).

Installation and mounting

Mounting is tool-free onto the enclosure wall. The optimised snap hooks allow for quick and secure fastening. Electrical connection is made via spring clamp terminals; in other models (e.g. 3237.XXX), connection is via individual wires (approx. 300 mm length). The unit is designed for surface mounting and requires a corresponding cutout in the enclosure.

Operational advantages

The SK 3244.710 offers high airflow, maximised by the integrated pleated filter in the standard delivery configuration. The diagonal fan technology ensures even air distribution within the enclosure, improving cooling performance. Tool-free mounting and easy filter replacement reduce maintenance time. The high protection rating of IP 54 (standard) up to IP 54 (with accessories) makes the device suitable for a wide range of industrial applications. The operating temperature range of -30 °C to 55 °C extends its usability across different climatic zones. The integrated pre-fuse rated at 6 A protects the device and connected circuit from overloads.

General
ModelWall surface mounted
MaterialPlastic
ColourRAL 7035
Scope of deliveryComplete ready-to-install unit, including pleated filter
FanDiagonal, 1~ capacitor motor
Airflow free blowing (with pleated filter)At 50 Hz: 867 m³/h, At 60 Hz: 910 m³/h
Airflow with associated exhaust filter including pleated filterAt 50 Hz: 720 m³/h, At 60 Hz: 745 m³/h
Airflow free-blowing (with filter)At 50 Hz: 700 m³/h, At 60 Hz: 770 m³/h
Airflow with associated exhaust filter including felt filterAt 50 Hz: 537 m³/h, At 60 Hz: 587 m³/h
Rated operating voltage115 V, 1~, 50 Hz/60 Hz
Rated power PelAt 50 Hz: 120.7 W, At 60 Hz: 166.1 W
Rated current max.At 50 Hz: 1.06 A, At 60 Hz: 1.47 A
Width323 mm
Height323 mm
Depth156 mm
Built-in depth136 mm
Mounting cutoutCutout width: 292 mm, Cutout height: 292 mm
Degree of protection IP according to IEC 60 529IP 54 with nonwoven filter/pleated filter, IP 55 with pleated filter and absorber mat, IP 56 with nonwoven filter/pleated filter and spray water hood
NEMA degree of protectionType 12 with felt filter/pleated filter, Type 3, 3R, 4, 4X with felt filter/pleated filter and spray water hood
FuseCircuit breaker/fuse: 6 A
NoteFor the filter fan 3237.XXX, the electrical connection is made via 2 individual wires (approx. 300 mm length) on the device; for all other filter fans, via spring clamp terminal.
Operating temperature range-30 °C...55 °C
Storage temperature range-30 °C...70 °C
Sound pressure levelAt 50 Hz: 64 dB(A), At 60 Hz: 66 dB(A)


Product data sheet
Datasheet for Rittal 3244710, EAN: 4028177997899

Questions & answers

What is the delivery time of Rittal 3244710 Blue e+ filter fan 867/910 m³/h, 115 V, RAL 7035?

The article Rittal 3244710 Blue e+ filter fan 867/910 m³/h, 115 V, RAL 7035 is currently in stock

According to our experience the article is ready for dispatch within 12 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Rittal 3244710 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Rittal 3244710 Blue e+ filter fan 867/910 m³/h, 115 V, RAL 7035 always at the best possible price. We can give you a discount of 2% on Rittal 3244710 Blue e+ filter fan 867/910 m³/h, 115 V, RAL 7035 if you choose payment in advance on ordering.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


This product is recommended as accessory for

Rittal 9828110 CS adapter plate for Toptec, for mounting of filter fan Rittal LogoRittal 9828110 CS adapter plate for Toptec, for mounting of filter fan The Rittal CS 9828110 is an adapter plate for the Toptec control panel series, specifically designed for the mounting of filter fans at locations where a cooling unit cutout is present in the ...

Lieske Part No.: 639691
Mfg Part No: 9828110
Type: CS 9828110
508,84 EUR
Rittal 9828110 plus VAT
≈ £425.90  |  ≈ $559.22
Delivery time from supplier's stock (ca.) 12 workdaysinfo_outline

Fitting accessory for Rittal 3244710 Blue e+ filter fan 867/910 m³/h, 115 V, RAL 7035

Rittal 3110000 Thermostat enclosure internal temperature controller Rittal LogoRittal 3110000 Thermostat enclosure internal temperature controller The Rittal temperature controller type SK 3110000 is an enclosure internal temperature controller used for controlling fans, heaters, and heat exchangers, as well as serving as a signal generator for ...

Lieske Part No.: 236715
Mfg Part No: 3110000
Type: SK 3110000
25,72 EUR
Rittal 3110000 plus VAT
≈ £21.53  |  ≈ $28.27
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
Rittal 3120200 Speed controller for filter fan and air/air heat exchanger Rittal LogoRittal 3120200 Speed controller for filter fan and air/air heat exchanger Temperature-dependent speed control for TopTherm fan-and-filter units and air/air heat exchangers for noise reduction and to save energy in part-load operation.
Technical specifications: For mounting ...

Lieske Part No.: 320297
Mfg Part No: 3120200
Type: SK 3120200
-10% 147,89 EUR 164,97 EUR
Rittal 3120200 plus VAT
≈ £123.78  |  ≈ $162.53
Delivery time from supplier's stock (ca.) 8 workdaysinfo_outline
Rittal 3173100 Replacement filter mat 5 pcs for SK 3243-45, filtration Rittal LogoRittal 3173100 Replacement filter mat 5 pcs for SK 3243-45, filtration Made of chopped-fibre mat with a progressive structure. Temperature-resistant to 100°C, self-extinguishing category F1 to DIN 53 438. Dust-laden air side: Open structure. Clean-air side: Closed ...

Lieske Part No.: 436924
Mfg Part No: 3173100
Type: SK 3173100
21,83 EUR
Rittal 3173100 plus VAT
≈ £18.27  |  ≈ $23.99
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
Rittal 3114200 Digital temperature display and control for 100–230 V Rittal LogoRittal 3114200 Digital temperature display and control for 100–230 V For installation in the enclosure door or wall.
Technical specifications: Three-digit, 7-segment display
Option of switching between °C/°F
Includes 1800 mm long NTC sensor
Two relay outputs as ...

Lieske Part No.: 502047
Mfg Part No: 3114200
Type: SK 3114200
86,13 EUR 86,14 EUR
Rittal 3114200 plus VAT
≈ £72.09  |  ≈ $94.66
Delivery time from supplier's stock (ca.) 6 workdaysinfo_outline
Rittal 3173105 Replacement filter mat 50 pcs for SK 3243-45, filtration Rittal LogoRittal 3173105 Replacement filter mat 50 pcs for SK 3243-45, filtration Made of chopped-fibre mat with a progressive structure. Temperature-resistant to 100°C, self-extinguishing category F1 to DIN 53 438. Dust-laden air side: Open structure. Clean-air side: Closed ...

Lieske Part No.: 564033
Mfg Part No: 3173105
Type: SK 3173105
194,47 EUR 202,25 EUR
Rittal 3173105 plus VAT
≈ £162.77  |  ≈ $213.72
Delivery time from supplier's stock (ca.) 6 workdaysinfo_outline
Rittal 3243300 Blue e+ outlet filter, RAL 7035 Rittal LogoRittal 3243300 Blue e+ outlet filter, RAL 7035 The article SK 3243.300 from Rittal is an exhaust filter for filter fans of the SK 3243.7xx, 3243.9xx, 3244.7xx, 3244.9xx and 3245.9xx series. It is a wall-mounted component made of plastic in the ...

Lieske Part No.: 683857
Mfg Part No: 3243300
Type: SK 3243.300
32,83 EUR
Rittal 3243300 plus VAT
≈ £27.48  |  ≈ $36.08
Delivery time from supplier's stock (ca.) 6 workdaysinfo_outline
Rittal 3118000 SK Hygrostat, 24-230 V, 1~, 12-75 V (DC), WHD: 71x71x33.5 mm Rittal LogoRittal 3118000 SK Hygrostat, 24-230 V, 1~, 12-75 V (DC), WHD: 71x71x33.5 mm The hygrostat switches on the heater and/or fan when a preset relative humidity in the enclosure is exceeded. In this way, the relative humidity is reduced, and condensation on assemblies or ...

Lieske Part No.: 693183
Mfg Part No: 3118000
Type: SK 3118000
82,70 EUR 84,05 EUR
Rittal 3118000 plus VAT
≈ £69.22  |  ≈ $90.89
Delivery time from supplier's stock (ca.) 6 workdaysinfo_outline
Rittal 3243080 Spray water hood for SK 3243, 3244.xx stainless steel Rittal LogoRittal 3243080 Spray water hood for SK 3243, 3244.xx stainless steel For fan-and-filter units/outlet filters. Easy cleaning thanks to exterior silicone coating approved for use with foodstuffs.
Material: Stainless steel
Silicone
Protection category IP to IEC 60 529: IP ...

Lieske Part No.: 842304
Mfg Part No: 3243080
Type: SK 3243080
160,54 EUR 166,96 EUR
Rittal 3243080 plus VAT
≈ £134.37  |  ≈ $176.43
Delivery time from supplier's stock (ca.) 7 workdaysinfo_outline
Rittal 3243020 Blank cover for mounting cutout SK 3243.xxx, SK 3 Rittal LogoRittal 3243020 Blank cover for mounting cutout SK 3243.xxx, SK 3 If existing mounting cut-outs for fan-and-filter units/outlet filters need to be closed to achieve a higher protection category, the filter mat of the fan-and-filter unit/outlet filter can simply be ...

Lieske Part No.: 983720
Mfg Part No: 3243020
Type: SK 3243020
24,73 EUR
Rittal 3243020 plus VAT
≈ £20.70  |  ≈ $27.18
Delivery time from supplier's stock (ca.) 12 workdaysinfo_outline
Rittal 3183125 Pleated filter IP55 for filter fan/outlet filter Rittal LogoRittal 3183125 Pleated filter IP55 for filter fan/outlet filter The article SK 3183125 from Rittal is a pleated filter for filter fans and outlet filters, specifically designed for use in industrial enclosures and climate control systems. It serves for air ...

Lieske Part No.: 1101876
Mfg Part No: 3183125
Type: SK 3183125
71,51 EUR 71,53 EUR
Rittal 3183125 plus VAT
≈ £59.85  |  ≈ $78.59
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
Rittal 3183135 SK SK absorber mat IP55 for filter fan 3243.3/7/9xx/3244, pack of 5 Rittal LogoRittal 3183135 SK SK absorber mat IP55 for filter fan 3243.3/7/9xx/3244, pack of 5 The SK 3183135 is an absorber mat from Rittal, specifically developed for use in pleated filters of filter fans. It serves as an additional protection filter to ensure the protection rating IP 55 when ...

Lieske Part No.: 1571618
Mfg Part No: 3183135
Type: SK 3183135
62,91 EUR 65,61 EUR
Rittal 3183135 plus VAT
≈ £52.66  |  ≈ $69.14
Made to order · Delivery time approx. 5 workdaysinfo_outline
Rittal 3173120 Pleated filter IP54 for filter fan/outlet filter Rittal LogoRittal 3173120 Pleated filter IP54 for filter fan/outlet filter The Rittal SK 3173120 is a pleated filter for filter fans and outlet filters, specifically developed for use in industrial enclosures and climate control systems. The product is made of PET material ...

Lieske Part No.: 2145329
Mfg Part No: 3173120
Type: SK 3173120
-10% 59,69 EUR 66,58 EUR
Rittal 3173120 plus VAT
≈ £49.96  |  ≈ $65.60
Delivery time from supplier's stock (ca.) 12 workdaysinfo_outline
Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Rittal 3244710 Blue e+ filter fan 867/910 m³/h RAL 7035
Rittal 3244710 Blue e+ filter fan 867/910 m³/h, 115 V, RAL 7035
180,44 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Rittal 3244710 Blue e+ filter fan 867/910 m³/h RAL 7035
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
9 + 1 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.