Microsens MS100732D

The Small Form Factor Pluggable (SFP+) is an advanced and interchangeable transceiver module specifically designed for high-performance networking applications. Its compact form factor is smaller than all currently available designs, providing maximum port density per line card. The hot-swap functionality allows SFP+ modules to be installed or replaced during operation without disrupting network availability.

SFP+ modules support bandwidths of up to 11.1 GBit/s, making them suitable for a variety of applications such as 10 Gigabit Ethernet, 8 Gigabit Fibre Channel, and STM-64. Depending on requirements, transceivers can be configured for multimode or single-mode fiber cables. Standards such as the Multi Source Agreement (MSA) and SFF-8472 ensure uniform design and optional Digital Diagnostic Monitoring (DDM), allowing precise monitoring of network connections.

Technical Specifications:

Types and Media:

• Supports multimode and single-mode fibers
• LC-duplex connector for reliable and robust connections
• Digital Diagnostic Monitoring (DDM) for monitoring temperature, signal strength, voltage, and other parameters
• Hot-swap capable for quick and uninterrupted installation or maintenance

Technical Details:

• Bandwidth: 8.5 GBit/s to 11.1 GBit/s
• Range:
- Multimode: 220 m to 300 m
- Single-mode: 10 km to 80 km

• Wavelengths:
- Multimode: TX/RX at 850 nm or 1310 nm
- Single-mode: TX/RX at 1310 nm or 1550 nm

• Operating Temperature:
- Standard models: 0°C to +70°C
- Extended temperature models: -40°C to +85°C

• Power Budget: Between 3.5 dB and 23 dB (depending on model)
• Laser Types:
- Multimode: VCSEL or FP
- Single-mode: DFB or EML

• Protocols: 10 Gigabit Ethernet, STM-64

Safety Information:

SFP+ transceivers utilize fiber-optic components that emit visible and invisible light. This light can cause irreversible eye damage. Follow these guidelines:

• Never look directly into optical outputs (risk of blinding).
• Cover unused optical ports with protective caps.
• Activate the connection only after all cabling has been fully installed.

The active laser components comply with Laser Class 1 standards.

Order Information:

Multimode Models:

• MS100700D: SFP+ 10G Transceiver SR, Multimode 850 nm, DDM, LC, range up to 300 m, operating temperature 0°C to +70°C
• MS100700DX: SFP+ 10G Transceiver SR, Multimode 850 nm, DDM, LC, extended temperature range (-40°C to +85°C)
• MS100701D: SFP+ 10G Transceiver LRM, Multimode 1310 nm, DDM, LC, range up to 220 m

Single-mode Models:

• MS100702D: SFP+ 10G Transceiver LR, Single-mode 1310 nm, DDM, LC, range up to 10 km, operating temperature 0°C to +70°C
• MS100702DX: SFP+ 10G Transceiver LR, Single-mode 1310 nm, DDM, LC, extended temperature range (-40°C to +85°C)
• MS100704D: SFP+ 10G Transceiver ER, Single-mode 1550 nm, DDM, LC, range up to 40 km
• MS100706D: SFP+ 10G Transceiver ZR, Single-mode 1550 nm, DDM, LC, range up to 80 km

These SFP+ modules provide a high-performance, flexible, and future-proof solution for modern network environments.