Metz Connect 130921-E E-DAT module 24x8(8) 1 U patch panel Cat.6A stainless steel
|
203,78 EUR |
|||||||||||
|
( 242,50 EUR incl. VAT ) ≈ £170.56 | ≈ $223.95 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline | |||||||||||
| In Stock: >50 pieces | |||||||||||
| Lieske Part No.: | 204575 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 130921-E | ||||||||||
| UPC/EAN: | 4250184106166 | ||||||||||
| Weight: | 1.96 kg | ||||||||||
| Type: | 130921-E | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Metz Connect 130921-E:
Applications
This patch panel is suitable for use in structured cabling systems in office buildings, data centres, industrial facilities, and other environments with high requirements for data transmission speed and signal integrity. The use of Cat.6A components enables a bandwidth up to 500 MHz, which is necessary for future-proof networks. Compatibility with PoE technologies also makes it suitable for powering IP cameras, access points, and other PoE-enabled devices.
Functions and Equipment in Detail
The device features 24 RJ45 connectors, each connected via BTR 8-position IDC punch-down terminals. This technology enables easy installation of 2- to 4-pair data cables with AWG 26/1 to 22/1, as well as stranded cables with 7-strand Cu wire AWG 26/7 to 22/7. The wire mapping can be configured according to T568A or T568B, allowing flexible integration into existing networks. The integrated cable strain relief ensures orderly cable routing, reducing tension on the connections. Grounding is achieved via a fixed grounding bolt with nut and lock washer, along with a supplied 30 cm long grounding cable. The fully shielded modules are connected via a grounding bar, ensuring effective shielding against electromagnetic interference.
Technology Explained Simply
The designation Cat.6A (Category 6A) describes the performance class of the network component. This class enables data transmission up to 10 GBit/s over distances up to 100 metres. Testing according to ISO/IEC 11801 and DIN EN 50173-1 ensures compliance with international standards for structured cabling systems. GHMT certification (Generic Horizontal Media Test) confirms the components' performance under real-world conditions. The grounding bar ensures all shielded modules are electrically connected, enhancing shielding effectiveness and minimizing interference. The BTR 8-position IDC punch-down terminals enable quick and secure cable connections, with the punch-down technology ensuring reliable contact.
Compatibility and Accessories
The patch panel is compatible with various modules, including 130B11-Z, 130B11-E, 130B11-25-E, 130B11P1-E, and 130910-Z. It can be used in combination with BTR 19-panel 1HE equipped with 24 E-DAT modules Cat.6A Class EA or 24 C6A modules Cat.6A Class EA. Additional compatible accessories include dust covers, blank modules, coaxial modules, and OpDAT modules for fibre optic applications. The use of E-DAT modules enables modular expansion and maintenance of the system.
Mounting and Installation
Installation is carried out in a 19-inch rack in 1HE format. The BTR 8-position IDC punch-down terminals allow for quick and tool-free connection of data cables. The integrated cable strain relief supports orderly cable routing, reducing tension on the connections. Grounding is achieved via the supplied grounding bolt and 30 cm long grounding cable. The modules are connected via a grounding bar, ensuring effective shielding.
Operational Advantages
The patch panel offers high reliability and performance through compliance with Class EA and GHMT certification. Compatibility with PoE technologies enables power delivery to network devices via the network cable, simplifying installation. The integrated cable strain relief and grounding bar ensure a stable and interference-free connection. The modular design allows for flexible expansion and maintenance of the system. The use of stainless steel ensures high mechanical stability and corrosion resistance.
The product is silver in colour, with a height of 44.45 mm, width of 442 mm, and depth of 100 mm. It is designed for use in professional environments where high requirements for signal integrity, reliability, and maintainability exist. Delivery includes the pre-equipped patch panel and the 30 cm long grounding cable.
| General | |
| Category | Cat.6A |
| Class | EA |
| Test standard | ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08), IEC 60603-7-51 Ed.1 (12/2008) |
| Certification | GHMT |
| Bandwidth | 500 MHz |
| Ethernet support | 10 GBit/s |
| PoE support | PoE, PoE plus, UPoE, 4PPoE |
| Connection type | BTR 8-way IDC terminal blocks |
| Core wiring | T568A, T568B |
| Cable strain relief | Integrated |
| Grounding stud | M6 x 10 |
| Grounding cable | 30 cm |
| Material | Stainless steel |
| Colour | Silver |
| Number of RJ45 ports | 24 |
| Rack format | 19 inch, 1HE |
| EMC standard | EN 55022, EN 50082T1 |
| Shield connection | 360 degrees |
| Module type | E-DAT |
| Number of modules | 24 |
| Scope of delivery | E-DAT modul 1HE patch panel 24 port, fitted, stainless steel; 30 cm grounding cable |
| HDBaseT support | |
| Earthing bar | |
Questions & answers
What is the delivery time of Metz Connect 130921-E E-DAT module 24x8(8) 1 U patch panel Cat.6A stainless steel?
The article Metz Connect 130921-E E-DAT module 24x8(8) 1 U patch panel Cat.6A stainless steel is currently in stock
According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Metz Connect 130921-E to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Metz Connect 130921-E E-DAT module 24x8(8) 1 U patch panel Cat.6A stainless steel always at the best possible price. We can give you a discount of 2% on Metz Connect 130921-E E-DAT module 24x8(8) 1 U patch panel Cat.6A stainless steel if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Metz Connect 130921-E E-DAT module 24x8(8) 1 U patch panel Cat.6A stainless steel we can offer you a price of 191,55 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
|
Metz Connect 130B11P0-E BTR 19-panel 1 U equipped with 24 C6A modules Cat.6A Class EA
The Metz Connect 130B11P0-E is a 19-inch 1HE module carrier for installation in rack systems, equipped with 24 individual modules of Category 6A, Class EA. It serves as a patch panel for structured ... Lieske Part No.: 142905 Mfg Part No: 130B11P0-E |
216,92 EUR
![]() ≈ £181.57 | ≈ $238.40
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Metz Connect 130B11P1-E module Cat.6A 24 port 180° M 1 U stainless steel
The product 130B11P1-E from Metz Connect is a 19-inch 1HE patch panel made of stainless steel, equipped with 24 individual modules of type C6Amodul 180°. It serves as a structured interconnection ... Lieske Part No.: 267477 Mfg Part No: 130B11P1-E |
211,89 EUR 211,89 EUR
![]() ≈ £177.35 | ≈ $232.86
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Metz Connect 130920-E BTR 19-panel 1 U populated with 24 E-DAT modules Cat.6A Class EA
E-DAT modul system Patch Panels - Module frame front made of silver anodized aluminum - Module housing made of die-cast zinc refined, - Installation-friendly connection of 2 - to 4 pair data ... Lieske Part No.: 498258 Mfg Part No: 130920-E |
198,00 EUR 198,00 EUR
![]() ≈ £165.72 | ≈ $217.60
Delivery time from supplier's stock (ca.) 7 workdaysinfo_outline
|
|
Metz Connect 130855C-E E-DAT Cat.6A 24 Port Patch Panel 1 U LSA
19 inch 1U carrier made of silver anodized aluminum, with 24 individually shielded RJ45 sockets, Cat.6, A component testing according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC ... Lieske Part No.: 837121 Mfg Part No: 130855C-E |
156,10 EUR
![]() ≈ £130.66 | ≈ $171.55
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Metz Connect 130856C-E E-DAT Cat.6A 24 Port Patch Panel 1 U LSA Modular
19 inch 1U carrier made of silver anodized aluminum, with 24 individually shielded RJ45 sockets, Cat.6, A Component testing according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC ... Lieske Part No.: 873578 Mfg Part No: 130856C-E |
174,87 EUR 174,87 EUR
![]() ≈ £146.37 | ≈ $192.18
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
Fitting accessory for Metz Connect 130921-E E-DAT module 24x8(8) 1 U patch panel Cat.6A stainless steel
|
Metz Connect 15091075-I OpDAT module LC-Duplex OM4
The Metz Connect OpDAT module LC-Duplex OM4 is a network plug connection element for fibre optic applications, specifically designed for use in modular applications. It serves as a coupling with ... Lieske Part No.: 102250 Mfg Part No: 15091075-I |
8,99 EUR 8,99 EUR
![]() ≈ £7.52 | ≈ $9.88
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Metz Connect 130B11P0-E BTR 19-panel 1 U equipped with 24 C6A modules Cat.6A Class EA
The Metz Connect 130B11P0-E is a 19-inch 1HE module carrier for installation in rack systems, equipped with 24 individual modules of Category 6A, Class EA. It serves as a patch panel for structured ... Lieske Part No.: 142905 Mfg Part No: 130B11P0-E |
216,92 EUR
![]() ≈ £181.57 | ≈ $238.40
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Metz Connect 130898-00-RW-I BLIND module pure white
The product is a blind module of the brand Metz Connect, type 130898-00-RW-I, designed in modular form. It is used to close empty socket positions in modular applications, ensuring a neat and closed ... Lieske Part No.: 263750 Mfg Part No: 130898-00-RW-I |
-16% 1,85 EUR 2,19 EUR
![]() ≈ £1.55 | ≈ $2.03
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Metz Connect 130B11P1-E module Cat.6A 24 port 180° M 1 U stainless steel
The product 130B11P1-E from Metz Connect is a 19-inch 1HE patch panel made of stainless steel, equipped with 24 individual modules of type C6Amodul 180°. It serves as a structured interconnection ... Lieske Part No.: 267477 Mfg Part No: 130B11P1-E |
211,89 EUR 211,89 EUR
![]() ≈ £177.35 | ≈ $232.86
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Metz Connect 15091076-I OpDAT module LC-Duplex APC OS2
The Metz Connect OpDAT modul LC-Duplex APC OS2 (type 15091076-I) is a fibre coupling module for use in structured cabling systems, particularly in Fiber-to-the-desk solutions. It serves as an ... Lieske Part No.: 415309 Mfg Part No: 15091076-I |
10,69 EUR
![]() ≈ £8.95 | ≈ $11.75
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Metz Connect 130920-E BTR 19-panel 1 U populated with 24 E-DAT modules Cat.6A Class EA
E-DAT modul system Patch Panels - Module frame front made of silver anodized aluminum - Module housing made of die-cast zinc refined, - Installation-friendly connection of 2 - to 4 pair data ... Lieske Part No.: 498258 Mfg Part No: 130920-E |
198,00 EUR 198,00 EUR
![]() ≈ £165.72 | ≈ $217.60
Delivery time from supplier's stock (ca.) 7 workdaysinfo_outline
|
|
Metz Connect 130B11-E module Cat.6A 180° socket
The Metz Connect module 130B11-E is a modular Cat.6A connection unit in RJ45 format with 180° cable entry, specifically designed for the MC-module installation form. It serves as a connecting point ... Lieske Part No.: 574977 Mfg Part No: 130B11-E |
7,45 EUR
![]() ≈ £6.24 | ≈ $8.19
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
BTR 820032-0108-I dust protection cover for module Cat.6A red
Optional dust protection flap suitable for the individual modules: C6, Amodul, E-DAT module, each in MC module or Keystone design, UTP module in Keystone design and UAE module in MC module design ...Lieske Part No.: 581511 Mfg Part No: 820032-0108-I |
0,32 EUR 0,33 EUR
![]() ≈ £0.27 | ≈ $0.35
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Metz Connect 130910-I BTR E-DAT module Cat.6A Class EA cable mounting without tool
The Metz Connect E-DAT module Cat.6A 8(8) socket, type 130910-I, is a modular connection unit for network cable connections in the field of structured cabling. It serves as an RJ45 socket for ... Lieske Part No.: 757262 Mfg Part No: 130910-I |
6,88 EUR
![]() ≈ £5.76 | ≈ $7.56
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Metz Connect 15091072-I module LC-Duplex OM3 OpDAT
OpDAT module LC (ceramic) MM aqua • LC duplex adapters with adapter, suitable for modular applications • sleeve made of zirconia (ZrO2) for MM applications • for singlemode applications • ... Lieske Part No.: 792169 Mfg Part No: 15091072-I |
7,94 EUR 7,94 EUR
![]() ≈ £6.65 | ≈ $8.73
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Metz Connect 130855C-E E-DAT Cat.6A 24 Port Patch Panel 1 U LSA
19 inch 1U carrier made of silver anodized aluminum, with 24 individually shielded RJ45 sockets, Cat.6, A component testing according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC ... Lieske Part No.: 837121 Mfg Part No: 130855C-E |
156,10 EUR
![]() ≈ £130.66 | ≈ $171.55
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Metz Connect 1309A0-I E-DAT module coupling 8(8) 180° class EA
The Metz Connect 1309A0-I is an RJ45 cable coupling of class E, A, complying with the standards ISO/IEC 11801 and DIN EN 50173-1. It is designed for use in structured cabling systems, particularly for ... Lieske Part No.: 852131 Mfg Part No: 1309A0-I |
10,68 EUR
![]() ≈ £8.94 | ≈ $11.74
in stockinfo_outline
|
|
Metz Connect 130856C-E E-DAT Cat.6A 24 Port Patch Panel 1 U LSA Modular
19 inch 1U carrier made of silver anodized aluminum, with 24 individually shielded RJ45 sockets, Cat.6, A Component testing according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC ... Lieske Part No.: 873578 Mfg Part No: 130856C-E |
174,87 EUR 174,87 EUR
![]() ≈ £146.37 | ≈ $192.18
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Metz Connect 130910-Z E-DAT module Cat.6A 8(8) socket (12 pcs)
E-DAT module Cat.6A 8(8) socket, T568A (12 pieces) modular connection unit Cat.6A, RJ45 Cat.6A component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011- 09, TIA/EIA-568-C.2 ... Lieske Part No.: 889922 Mfg Part No: 130910-Z |
-52% 55,08 EUR 115,60 EUR
![]() ≈ £46.10 | ≈ $60.53
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Metz Connect 130898-01-I KOAX module F-socket/F-socket
Coaxial connector with adapter in modular design, suitable for module applications, front connection: for F-connector, rear connection: for F-connector, 75-ohm through-coupling, without termination ... Lieske Part No.: 966298 Mfg Part No: 130898-01-I |
6,96 EUR 6,96 EUR
![]() ≈ £5.82 | ≈ $7.65
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Metz Connect 130B11-25-E 25G module GHMT certified according to ISO/IEC TR-11801-9905
The Metz Connect 25G module type 130B11-25-E is a network connection module for high-speed connections in the field of structured cabling. It is specifically designed for use in modern network ... Lieske Part No.: 1441037 Mfg Part No: 130B11-25-E |
-15% 8,33 EUR 9,81 EUR
![]() ≈ £6.97 | ≈ $9.15
Delivery time from supplier's stock (ca.) 6 workdaysinfo_outline
|
|
Metz Connect 130B11-Z module Cat.6A 180° jack (12 pcs)
C6Amodul 180° Jack .modular Cat.6A connection unit RJ45 .Installation type: module, cable feed 180° .robust, one-piece and reusable module housing made of die-cast zinc, refined .Assembly without ... Lieske Part No.: 1441038 Mfg Part No: 130B11-Z |
-51% 58,76 EUR 120,95 EUR
![]() ≈ £49.18 | ≈ $64.58
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|




















