Metz Connect 130921-E, EAN: 4250184106166

Metz Connect 130921-E Patch Panel 24 Port Stainless Steel

Networks > Patch Panels

Metz Connect 130921-E Patch Panel 24 Port Stainless Steel

Lieske Part No. 204575
Mfg Part No 130921-E
EAN-Code 4250184106166
Manufacturer Metz Connect
Here only 203,78 EUR
242,50 EUR incl. VAT

Further information for Metz Connect 130921-E Patch Panel 24 Port Stainless Steel

General
CategoryCat.6A
ClassEA
Test standardISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08), IEC 60603-7-51 Ed.1 (12/2008)
CertificationGHMT
Bandwidth500 MHz
Ethernet support10 GBit/s
PoE supportPoE, PoE plus, UPoE, 4PPoE
Connection typeBTR 8-way IDC terminal blocks
Core wiringT568A, T568B
Cable strain reliefIntegrated
Grounding studM6 x 10
Grounding cable30 cm
MaterialStainless steel
ColourSilver
Number of RJ45 ports24
Rack format19 inch, 1HE
EMC standardEN 55022, EN 50082T1
Shield connection360 degrees
Module typeE-DAT
Number of modules24
Scope of deliveryE-DAT modul 1HE patch panel 24 port, fitted, stainless steel; 30 cm grounding cable
HDBaseT supportYes
Earthing barYes
The Metz Connect patch panel 130921-E is a 19-inch 1HE module carrier made of stainless steel, equipped with 24 individual modules of the E-DAT series. It serves as a structured connection unit for copper data cables in the Cat.6A category and is designed for use in professional network infrastructures. The components are tested according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08), and IEC 60603-7-51 Ed.1 (12/2008), and are GHMT-certified. Compliance with Class EA according to ISO/IEC 11801 and DIN EN 50173-1 ensures high performance and reliability. The patch panel is suitable for operation with 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE), and HDBaseT. The integrated cable strain relief enables orderly cable routing, with additional strain relief possible. Grounding is achieved via a grounding bolt M6 x 10 with nut and lock washer, supplemented by a 30 cm long grounding cable. All fully shielded modules are interconnected via a grounding bar, ensuring effective electromagnetic shielding.

Applications
This patch panel is suitable for use in structured cabling systems in office buildings, data centres, industrial facilities, and other environments with high requirements for data transmission speed and signal integrity. The use of Cat.6A components enables a bandwidth up to 500 MHz, which is necessary for future-proof networks. Compatibility with PoE technologies also makes it suitable for powering IP cameras, access points, and other PoE-enabled devices.

Functions and Equipment in Detail
The device features 24 RJ45 connectors, each connected via BTR 8-position IDC punch-down terminals. This technology enables easy installation of 2- to 4-pair data cables with AWG 26/1 to 22/1, as well as stranded cables with 7-strand Cu wire AWG 26/7 to 22/7. The wire mapping can be configured according to T568A or T568B, allowing flexible integration into existing networks. The integrated cable strain relief ensures orderly cable routing, reducing tension on the connections. Grounding is achieved via a fixed grounding bolt with nut and lock washer, along with a supplied 30 cm long grounding cable. The fully shielded modules are connected via a grounding bar, ensuring effective shielding against electromagnetic interference.

Technology Explained Simply
The designation Cat.6A (Category 6A) describes the performance class of the network component. This class enables data transmission up to 10 GBit/s over distances up to 100 metres. Testing according to ISO/IEC 11801 and DIN EN 50173-1 ensures compliance with international standards for structured cabling systems. GHMT certification (Generic Horizontal Media Test) confirms the components' performance under real-world conditions. The grounding bar ensures all shielded modules are electrically connected, enhancing shielding effectiveness and minimizing interference. The BTR 8-position IDC punch-down terminals enable quick and secure cable connections, with the punch-down technology ensuring reliable contact.

Compatibility and Accessories
The patch panel is compatible with various modules, including 130B11-Z, 130B11-E, 130B11-25-E, 130B11P1-E, and 130910-Z. It can be used in combination with BTR 19-panel 1HE equipped with 24 E-DAT modules Cat.6A Class EA or 24 C6A modules Cat.6A Class EA. Additional compatible accessories include dust covers, blank modules, coaxial modules, and OpDAT modules for fibre optic applications. The use of E-DAT modules enables modular expansion and maintenance of the system.

Mounting and Installation
Installation is carried out in a 19-inch rack in 1HE format. The BTR 8-position IDC punch-down terminals allow for quick and tool-free connection of data cables. The integrated cable strain relief supports orderly cable routing, reducing tension on the connections. Grounding is achieved via the supplied grounding bolt and 30 cm long grounding cable. The modules are connected via a grounding bar, ensuring effective shielding.

Operational Advantages
The patch panel offers high reliability and performance through compliance with Class EA and GHMT certification. Compatibility with PoE technologies enables power delivery to network devices via the network cable, simplifying installation. The integrated cable strain relief and grounding bar ensure a stable and interference-free connection. The modular design allows for flexible expansion and maintenance of the system. The use of stainless steel ensures high mechanical stability and corrosion resistance.

The product is silver in colour, with a height of 44.45 mm, width of 442 mm, and depth of 100 mm. It is designed for use in professional environments where high requirements for signal integrity, reliability, and maintainability exist. Delivery includes the pre-equipped patch panel and the 30 cm long grounding cable.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/204575
qrcode für Metz Connect 130921-E Patch Panel 24 Port Stainless Steel