Modario PS IP64 stainless steel joint cover
Lieske Part No.: 424168

ModarioBlind cover
Lieske Part No.: 2039513

Modario 31 InterfaceInterface S, slave, local control, central control, dimmable, installation location: on the Modario mounting rail, made of sheet steel, protection rating (total): IP20, protection class (total): SK I (protective earthing), test mark: CE, VDE, 1 x DALI-2
Lieske Part No.: 2037162

Mounting accessories, for Modario, mounting set, made of steel, untreated, galvanized, with plug, 3-pin, with phase selection, for mounting rail, 5- or 10-wire, packaging unit: 1 piece,
Lieske Part No.: 1337163

Mounting accessories, for Modario, mounting set, made of steel, untreated, galvanized, with plug, 5-pin, with phase selection, for mounting rail, 5- or 10-wire, packaging unit: 1 piece,
Lieske Part No.: 853807

Accessory housing, for Modario, luminaire connector, made of stainless steel
Lieske Part No.: 853799

Front panel for protection class IP64 Modario IP64
Lieske Part No.: 824700

Joint cover Modario IP64
Lieske Part No.: 879515

Spreader element, for module 540, spreader element, structured, wide beam, orange, strong tint, spreader element orange, strong tint for color temperature reduction from 4000K to approx. 2200K or from 3000K to approx. 1900K, mains connection: 230..240V, packaging unit: 1 piece
Lieske Part No.: 1100612

Wall mounting Siteco metallic grey (DB 702S) Floodlight FL 20 mini
Lieske Part No.: 581307

End laminations for polyester support rail 190. 2 end laminations are required for each light strip. Colour: light grey. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 854097

Steel band suspension made of stainless steel, acid and corrosion resistant. Including fastening claw. Suspension length up to 1000 mm. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 953802

Through wiring for grid lights 28/54 W, LED 1200. Length 1450. Consists of 3 individual conductors 1.5mm2. Heat resistance up to 105 °C.
Lieske Part No.: 995795

Luminaire support bracket for polyester support rail 190
Lieske Part No.: 532800

Counterweight for luminaire type ... ETDD. Accessories available for 10 years after the invoice date, subject to reasonable modifications in the interests of progress.
Lieske Part No.: 430433

Luminaire 10 years, spare parts (LED module, control gear, optical system) available 15 years after invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 903437

Replacement cover for damp-proof surface-mounted light 7131/58. Length 1584 mm, width 109.4 mm, height 93 mm. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 928201

Replacement seal. For LED recessed floor spotlight Lutera 100.
Lieske Part No.: 967458

Stainless steel end plate, square. For LED recessed floor spotlight Lutera 100.
Lieske Part No.: 153100

Cover glass, anti-slip. For LED recessed floor spotlight Lutera 100.
Lieske Part No.: 967947

Floor-mounted pot made of weather-resistant PVC pipe. For luminaire type Lutera 200.
Lieske Part No.: 153138

Stainless steel end plate, round.
Lieske Part No.: 153139

Stainless steel end plate, square.
Lieske Part No.: 153152

Cover glass, anti-slip.
Lieske Part No.: 1320808

Ceiling connection box, round. Color white. For connecting the power supply to ceiling outlets.
Lieske Part No.: 130844

Ceiling connection box for connecting the 5-pin power cable to ceiling outlets. Square, silver-grey. Length 102 mm, width 102 mm, height 36 mm.
Lieske Part No.: 924401

Mounting plate for reinforcing ceiling panels with a system size of 625 mm. Design C2 for downlights Ø 226 mm. Also suitable for installing downlights in closed ceilings with a low load-bearing capacity. Made of sheet steel, Sendzimir galvanized.
Lieske Part No.: 769266

Feed accessories for Atirion rope suspension... 1 set.
Lieske Part No.: 790490

Mounting brackets for installing the lights in ceilings with visible and concealed support rails and sawn ceiling openings. 1 set = 4 pieces. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 137798

Link chain, 20 m. For ball-proof, hanging installation of the lights. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 371762

Ball roll-off bracket for Actison LED (265 mm) / Actison Fit (310 mm) lights. Installation only in conjunction with support rail 110N··· and mounting bracket Actison TS1. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interest of progress.
Lieske Part No.: 993881

Heat-resistant through-wiring for Actison strip lights. Heat resistance up to 105 °C. Consists of 7 individual conductors 1.5mm2. The light is equipped with a 5-pin connection terminal for through-wiring. The scope of delivery includes corresponding terminals for additional wires. With PG grommet. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interest of progress.
Lieske Part No.: 209416

Installation frame for Fidesca-SD 625...414/24 W, FidescaSD G3. System dimensions 625 x 625 (M84). Length 623 mm, width 45 mm, height 44 mm. Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 160009

Installation cassette for panel ceilings, module 100. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1331200

Mounting plate for reinforcing ceiling panels and for installing the downlight in ceilings with a low load-bearing capacity. For module size 600. Made of sheet steel, Sendzimir galvanized. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1331199

Concrete casting housing for the installation of downlights including ballast box in concrete ceilings. Made of galvanized sheet steel. Made of galvanized sheet steel. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 165219

Renovation panel for covering existing ceiling cutouts in renovation applications. For ceiling cutouts Ø 150 - 160 mm. Colour white. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 165222

Renovation panel for covering existing ceiling cutouts in renovation applications. For ceiling cutouts Ø 170 - 220 mm. Colour white. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 165227

Renovation panel for covering existing ceiling cutouts in renovation applications. For ceiling cutouts Ø 230 - 260 mm. Colour white. Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 1331198

Mounting brackets for installing the lights in ceilings with visible and concealed support rails and sawn ceiling openings. For BelvisoAct C2 semi-recessed lights. 1 set (4 pieces). Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1327115

Lieske Part No.: 291907

Lieske Part No.: 291921

Installation housing for round surface-mounted luminaires PolaronIQ WD1/WD1D. For flush-mounting the luminaire in walls and ceilings. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846343

Installation housing for round surface-mounted luminaires PolaronIQ WD2/WD2D, WD1-2/ WD1-2D. For flush-mounting the luminaire in walls and ceilings. For use in combination with concrete casting box Polaron IQ WD2 BE. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846590

Semi-recessed housing for round surface-mounted luminaire PolaronIQ WD1. Packaging unit consisting of 1 piece. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 846321

Semi-recessed housing for Polaron IQ WD2/WD2D, WD1-2/WD1-2D. Packaging unit consisting of 1 piece. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 846540

Mounting accessories for sawn ceiling openings and system ceilings with concealed support rails. For ArimoS MRX LED recessed luminaires M73 / M84. For Creavo recessed luminaires M84. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1327241

Semi-recessed housing for Polaron IQ WD2/WD2D, WD1-2/WD1-2D. With reinforced support plate, system dimensions 600 x 600 (M73). For downlight installation in closed ceilings with low load-bearing capacity. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846564

Semi-recessed housing for Polaron IQ WD2/WD2D, WD1-2/WD1-2D. With reinforced support plate, system dimensions 625 x 625 (M84). For downlight installation in closed ceilings with low load-bearing capacity. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846578

Installation housing for round surface-mounted luminaires PolaronIQ WD2/WD2D. With reinforced support plate, system dimensions 600 x 600 (M73). For downlight installation in closed ceilings with low load-bearing capacity. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846719