Versions in Accessories

Decorative front frame for PANOS infinity / evolution Q 140 mm, silver, made of high-quality, UV-resistant polycarbonate, in aluminum look, tool-free installation, weight: 0.02 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095494

Decorative front frame for PANOS infinity / evolution Q 190 mm, silver, made of high-quality, UV-resistant polycarbonate, in aluminum look, tool-free installation, weight: 0.03 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095495

Decorative front frame for PANOS infinity / evolution Q 190 mm, anthracite, made of high-quality, UV-resistant polycarbonate, in aluminum look, tool-free installation, weight: 0.03 kg, Note: Not suitable for luminaires in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095496

Square surface-mounted housing in a classic design, 2-part housing: die-cast aluminum, painted white, upper housing section (including electrical connection) for ceiling mounting, lower housing section for accommodating PANOS infinity Q190 HF/HG/HM/HL (white cover ring version) and PANOS infinity/evolution Q190 H recessed luminaires, luminaire to be ordered separately, lower housing section is locked to the upper section using a spring lock, electrical connection: 5-pin plug connection terminal and cable for connection to the ballast unit, prepared for looping through, in combination with the surface-mounted housing, the PANOS infinity recessed luminaires achieve protection class IP20, dimensions: 227 x 227 x 206 mm, weight: 2.79 kg, note: surface-mounted housing not suitable in combination with attachment (IP54) and decorative rings, emergency light versions (NT3/E3D), for accommodating 'tunableWhite' recessed luminaires, as well as for luminaires with high luminous flux (50W), pendant mounting on request, illustration: surface-mounted housing including luminaire!
Lieske Part No.: 872986

Attachment, clear for PANOS infinity / evolution DA (R) 100 mm, to achieve protection class IP54 with PANOS infinity / evolution recessed luminaires in closed ceilings, dimensions: diameter 124 x 9 mm, weight: 0.05 kg Note: Not suitable for luminaires in a flush-mounted/trimless design and combination with surface-mounted housing! Note: Not in conjunction with black reflectors (BK) and not in conjunction with emergency lighting luminaires E3D!
Lieske Part No.: 372920

Decorative ring for PANOS infinity / evolution DA (R) 100 mm, silver anodized, decorative attachment ring made of brushed aluminum, quick installation using bayonet fastening, weight: 0.04 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095583

Decorative glass for PANOS infinity / evolution L, DA (R) 100 mm, matt outside, made of high-quality decorative, clear acrylic glass cylinder with attached pane, matt outside, quick installation using reflector bayonet fastening, can also be used for flush ceiling lights, weight: 0.1 kg
Lieske Part No.: 2095582

Planar ring for PANOS infinity DA (R) 150 mm, for flush-mounted installation of PANOS infinity recessed luminaires (flush-mounted/trimless version) in plaster ceilings, made of polycarbonate (PC), glass fibre reinforced white, perforated with plaster edge, dimensions: diameter 163 x 83 mm
Lieske Part No.: 372943

Planar ring for PANOS infinity DA (R) 200 mm, for flush installation of PANOS infinity recessed luminaires (flush version/trimless) in plaster ceilings, made of polycarbonate (PC), glass fibre reinforced white, perforated with plaster edge, dimensions: diameter 212 x 83 mm
Lieske Part No.: 872987

Attachment, clear for PANOS infinity / evolution Q 68 mm, to achieve protection class IP54 with PANOS infinity / evolution Q recessed luminaires in closed ceilings, dimensions: 82 x 82 x 7 mm, weight: 0.02 kg Note: Not suitable for luminaires in flush/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095685

Attachment, clear for PANOS infinity / evolution Q 100 mm, to achieve protection class IP54 with PANOS infinity / evolution Q recessed luminaires in closed ceilings, dimensions: 114 x 114 x 6 mm, weight: 0.02 kg Note: Not suitable for luminaires in a flush-mounted/trimless design and in combination with surface-mounted housing! Note: Not in conjunction with black reflectors (BK) and not in conjunction with emergency lighting luminaires E3D!
Lieske Part No.: 2095684

Planar ring for PANOS infinity DA (R) 68 mm, for flush-mounted installation of PANOS infinity recessed luminaires (flush-mounted/trimless version), made of aluminium, painted white, perforated with plastering edge, dimensions: diameter 82 x 41 mm
Lieske Part No.: 381360

Extension cable 5 m with plug/socket (2-pin), for connecting cable operating device and lighting unit
Lieske Part No.: 2095899

Concrete casting housing Q110 for accommodating a KAVA LED light and an electronic power supply unit, housing made of galvanized sheet steel and plaster frame made of stainless steel, dimensions: 164x164x52 mm, weight: 0.71 kg, note: protection class IP40 only in conjunction with decorative cover, to be ordered separately, can also be used in exposed concrete walls!
Lieske Part No.: 2096298

Concrete casting housing Q220 for accommodating a KAVA LED light and an electronic power supply unit, housing made of galvanized sheet steel and plaster frame made of stainless steel, dimensions: 294x294x78 mm, weight: 2.05 kg, note: protection class IP40 only in conjunction with decorative cover, to be ordered separately, can also be used in exposed concrete walls!
Lieske Part No.: 2096302

Decorative cover Q110, clear, for covering KAVA LED recessed wall lights, cover made of safety glass and frame made of stainless steel, dimensions: 137x137x8 mm, weight: 0.26 kg, Note: Protection class IP40 only in conjunction with concrete casting housing, to be ordered separately!
Lieske Part No.: 2096299

Decorative cover Q110, matt, for covering KAVA LED recessed wall lights, cover made of safety glass and frame made of stainless steel, dimensions: 137x137x8 mm, weight: 0.26 kg, note: protection class IP40 only in conjunction with concrete casting housing, to be ordered separately!
Lieske Part No.: 2096300

Decorative cover Q220, matt, for covering KAVA LED recessed wall lights, cover made of safety glass and frame made of stainless steel, dimensions: 268x268x7 mm, weight: 0.75 kg, Note: Protection class IP40 only in conjunction with concrete casting housing, to be ordered separately!
Lieske Part No.: 2096303

Concrete casting housing for DA 68 mm, for installing PANOS infinity / evolution R68 / DIAMO and VIVOII-SR recessed luminaires including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork using fastening tabs, secure fastening to the on-site formwork by additional screwing of the housing, dimensions: 300 x 150 x 155 mm, weight: 1.6 kg, note: for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800824) must be ordered separately!
Lieske Part No.: 2089421

Concrete casting housing for DA 100 mm, for installing PANOS infinity / evolution R100 recessed luminaires and DIAMO Deep Source installation rings (1-way) including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork using fastening tabs, secure attachment to the on-site formwork by additional screwing of the housing, dimensions: 500 x 200 x 155 mm, weight: 2.2 kg, Note: Can also be used in combination with PANOS infinity / evolution emergency light variant (E3D), for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800824) to be ordered separately! Note: Not in combination with PANOS infinity R100L/H/WW LED927-65/19W!
Lieske Part No.: 1348131

Concrete casting housing for DA 150 mm, for installing CREDOS, PANOS infinity / evolution R150 and PANOS infintiy E150 tunableWhite recessed luminaires including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork using fastening tabs, secure fastening to the on-site formwork by additional screwing of the housing, dimensions: 500 x 200 x 165 mm, weight: 2.1 kg, Note: Can also be used in combination with PANOS infinity / evolution emergency light variant (E3D), for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800825) to be ordered separately! Note: Not in combination with PANOS infinity R150WW LED927-65/19W!
Lieske Part No.: 1441104

Concrete casting housing for DA 140x140 mm, for installing PANOS infinity / evolution Q140 and PANOS infintiy Q140 tunableWhite recessed luminaires including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork via fastening tabs, secure fastening to the on-site formwork by additional screwing of the housing, dimensions: 500 x 200 x 155 mm, weight: 2.1 kg, Note: Can also be used in combination with PANOS infinity / evolution emergency light variant (E3D), for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800824) to be ordered separately!
Lieske Part No.: 2089419

Concrete casting housing for DA 200 mm, for installing PANOS infinity / evolution R200 and PANOS infintiy E200 tunableWhite recessed luminaires including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork using fastening tabs, secure fastening to the on-site formwork by additional screwing of the housing, dimensions: 550 x 250 x 165 mm, weight: 2.5 kg, Note: Can also be used in combination with PANOS infinity / evolution emergency light variant (E3D), for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800825) to be ordered separately! Note: Not in conjunction with PANOS infinity R200WW LED927-65/29W and with PANOS infinity / evolution recessed luminaires with system output >32W!
Lieske Part No.: 1348272

Concrete casting housing for DA 190x190 mm, for installing PANOS infinity / evolution Q190 and PANOS infintiy Q190 tunableWhite recessed luminaires including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork via fastening tabs, secure fastening to the on-site formwork by additional screwing of the housing, dimensions: 550 x 250 x 155 mm, weight: 2.5 kg, Note: Can also be used in combination with PANOS infinity / evolution emergency light variant (E3D), for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800824) to be ordered separately!
Lieske Part No.: 2089420

Mounting clip set (25mm) for concrete casting housing R68, Q68, R100, Q100, Q140 and Q190, for attachment to the existing centering plate, guarantees a firm connection between the centering plate and the concrete casting housing when applied in the concrete plant
Lieske Part No.: 1348118

Mounting clip set (35mm) for concrete casting housing R150 or R200, for attachment to the existing centering plate, guarantees a firm connection between the centering plate and the concrete casting housing when applied in the concrete plant
Lieske Part No.: 1348202

Installation ring (1-way) serves as a platform for flexible combination of the LED accent light module CARDAN evolution M, simple tool-free assembly of the module using a snap-in mechanism, ring made of polycarbonate (PC), white, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: diameter 145, installation depth of the LED accent light module: 170 mm, external dimensions of the ring: diameter 160x68 mm, weight: 0.07 kg, Note: Simple intuitive disassembly of the LED light module using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 1348129

Installation frame (1-way, square) serves as a platform for flexible combination of the LED accent light module CARDAN evolution M, simple tool-free assembly of the module using a snap-in mechanism, frame made of polycarbonate (PC), white, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: diameter 145, installation depth of the LED accent light module: 170 mm, external dimensions of the frame: 160x160x68 mm, weight: 0.09 kg, Note: Simple intuitive disassembly of the LED light module using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 2089464

Installation frame (2-way) serves as a platform for flexible combination of two LED accent light modules CARDAN evolution M, simple tool-free assembly of the modules using a snap-in mechanism, frame made of polycarbonate (PC), white, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: 2x diameter 145, installation depth of the LED accent light modules: 170 mm, external dimensions of the frame: 320x160x68 mm, weight: 0.19 kg, Note: Simple intuitive disassembly of the LED light modules using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 1441124

Installation ring (1-way) serves as a platform for flexible combination of the LED accent light module CARDAN evolution L, simple tool-free assembly of the module using a snap-in mechanism, ring made of polycarbonate (PC), glass fiber reinforced white, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: diameter 225, installation depth of the LED accent light module: 270 mm, external dimensions of the ring: diameter 249x68 mm, weight: 0.14 kg, Note: Simple intuitive disassembly of the LED light module using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 2089457

Installation frame (1-way, square) serves as a platform for flexible combination of the LED accent light module CARDAN evolution L, simple tool-free assembly of the module using a snap-in mechanism, frame made of polycarbonate (PC), glass fiber reinforced white, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: diameter 225, installation depth of the LED accent light module: 270 mm, external dimensions of the frame: 249x249x68 mm, weight: 0.17 kg, Note: Simple intuitive disassembly of the LED light module using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 2089456

Auxiliary tool for easy intuitive disassembly of the LED light module
Lieske Part No.: 2089455

Installation frame (1-way, square) serves as a platform for flexible combination of the LED accent light module CARDAN evolution M, simple tool-free assembly of the module using a snap-in mechanism, frame made of polycarbonate (PC), matt silver, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: diameter 145, installation depth of the LED accent light module: 170 mm, external dimensions of the frame: 160x160x68 mm, weight: 0.09 kg, Note: Simple intuitive disassembly of the LED light module using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 2091160

Connection box
Lieske Part No.: 1345862

Rope suspension set. Length 1500mm. Weight: 0.15 kg
Lieske Part No.: 2129752

Lieske Part No.: 552263

Kit for the mechanical connection between a standard IQ Wave suspended luminaire and a standard IQ Wave suspended luminaire. Connection plate: steel, painted white (similar to RAL9016). Cover: polycarbonate (PC), white (similar to RAL9016).
Lieske Part No.: 2090521

Ceiling canopy for the power connection of the IQ Wave pendulum version. Cover: polycarbonate (PC), white (similar to RAL9016).
Lieske Part No.: 1598116

Aquaforce Pro tension cable suspension set
Lieske Part No.: 2090487

Frame to adapt VOYAGER One surface-mounted luminaire to recessed version. Frame assembly is tool-free.
Lieske Part No.: 2091239

Straight connection kit including screws and light barrier to prevent light from escaping from the seams of the aluminum channels. Weight: 0.23 kg
Lieske Part No.: 2091440

THORNeco 3-pin CONNY IP68 connector for the quick and safe connection of rigid, single-core or fine-stranded cables. 3-pin, IP68, cable diameter: 6.5-12mm, cross-section: 1-2.5mm², nominal voltage: 250V, nominal current: 16A, tool-free connection. Material: polyamide, weight: 0.05 kg.
Lieske Part No.: 2092502

Surface-mounted housing for 597 x 597 mm Omega Pro 2 luminaire. Housing: steel, painted Dimensions: 612 x 615 x 75 mm Weight: 2.21 kg
Lieske Part No.: 2091976

Surface-mounted housing for 622 x 622 mm Omega Pro 2 luminaire. Housing: steel, painted Dimensions: 637 x 640 x 75 mm Weight: 2.43 kg
Lieske Part No.: 2091977

Installation frame for a 622 x 622mm Omega Pro 2 light in a plasterboard ceiling with a thickness of 12-50 mm. The installation frame is made of spot-welded sheet steel and is supplied with 4 height-adjustable leveling elements. The frame is powder-coated white, similar to RAL 9016. In order to properly insert the light into the mounting frame (including CKIT / CKIT+), there must be a clear space of 200 mm in the ceiling, and the distance to the wall should be at least 150 mm. Dimensions: 655 x 655 x 91 mm Ceiling cutout: 640 x 640mm. Weight: 1.97 kg
Lieske Part No.: 2091975

Adjustable kit (1500 mm) for suspending square or rectangular Omega Pro 2 versions. Diameter 200 mm. Centering holes: 127 mm. Weight: 0.3 kg
Lieske Part No.: 2091978

Mounting frame for flush mounting
Lieske Part No.: 2092713

Rope mounting set for ceiling mounting
Lieske Part No.: 2092714

3-pole extension cable (IP68) for 1 additional meter in the THORNeco cable system. Compatible with LEONIE, ROSY, MARY. Material: H07RN-F 3G x 1.5mm², weight: 0.16 kg.
Lieske Part No.: 2092503

3-pole extension cable (IP68) for 2 additional meters in the THORNeco cable system. Compatible with LEONIE, ROSY, MARY. Material: H07RN-F 3G x 1.5mm², weight: 0.3 kg.
Lieske Part No.: 1776344