L3+DALI angle connector, black, protective conductor outside, polarization nose inside, for mechanical and electrical connection of two power rails, for feeding two power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 68x68x34 mm, overall dimensions: 110x110x34 mm
Lieske Part No.: 967848

L3+DALI T-connector, white, protective conductor on the right and outside, for the mechanical and electrical connection of three power rails, for feeding three power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 102x68x34 mm, overall dimensions: 187x110x34 mm
Lieske Part No.: 1438718

L3+DALI T-connector, black, protective conductor on the right and outside, for the mechanical and electrical connection of three power rails, for feeding three power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 102x68x34 mm, overall dimensions: 187x110x34 mm
Lieske Part No.: 301950

L3+DALI T-connector, white, protective conductor on the left and outside, for the mechanical and electrical connection of three power rails, for feeding three power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 102x68x34 mm, overall dimensions: 187x110x34 mm
Lieske Part No.: 1438717

L3+DALI T-connector, black, protective conductor on the left and outside, for the mechanical and electrical connection of three power rails, for feeding three power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 102x68x34 mm, overall dimensions: 187x110x34 mm
Lieske Part No.: 2095241

L3+DALI cross connector, white, for mechanical and electrical connection of four power rails, for feeding four power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 102x102x34 mm, overall dimensions: 187x187x34 mm
Lieske Part No.: 1320475

L3+DALI cross connector, black, for mechanical and electrical connection of four power rails, for feeding four power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 102x102x34 mm, overall dimensions: 187x187x34 mm
Lieske Part No.: 968061

L3+DALI flexible connector, white, for electrical connection of two power rails, mounted at an angle of up to 180° (including protective conductor), plastic parts made of polycarbonate (PC), installation dimensions: 213x34x34 mm, overall dimensions: 297x34x34 mm
Lieske Part No.: 968059

L3+DALI flexible connector, black, for electrical connection of two power rails, mounted at an angle of up to 180° (including protective conductor), plastic parts made of polycarbonate (PC), installation dimensions: 213x34x34 mm, overall dimensions: 297x34x34 mm
Lieske Part No.: 968058

Decorative ring for PANOS infinity / evolution DA (R) 200 mm, silver anodized, decorative attachment ring made of brushed aluminum, quick installation using bayonet fastening, weight: 0.17 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095321

Decorative ring for PANOS infinity / evolution DA (R) 150 mm, anthracite anodized, decorative attachment ring made of brushed aluminum, quick installation using bayonet fastening, weight: 0.13 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095320

Decorative front frame for PANOS infinity / evolution Q 140 mm, silver, made of high-quality, UV-resistant polycarbonate, in aluminum look, tool-free installation, weight: 0.02 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095494

Decorative front frame for PANOS infinity / evolution Q 190 mm, silver, made of high-quality, UV-resistant polycarbonate, in aluminum look, tool-free installation, weight: 0.03 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095495

Decorative front frame for PANOS infinity / evolution Q 190 mm, anthracite, made of high-quality, UV-resistant polycarbonate, in aluminum look, tool-free installation, weight: 0.03 kg, Note: Not suitable for luminaires in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095496

Square surface-mounted housing in a classic design, 2-part housing: die-cast aluminum, painted white, upper housing section (including electrical connection) for ceiling mounting, lower housing section for accommodating PANOS infinity Q190 HF/HG/HM/HL (white cover ring version) and PANOS infinity/evolution Q190 H recessed luminaires, luminaire to be ordered separately, lower housing section is locked to the upper section using a spring lock, electrical connection: 5-pin plug connection terminal and cable for connection to the ballast unit, prepared for looping through, in combination with the surface-mounted housing, the PANOS infinity recessed luminaires achieve protection class IP20, dimensions: 227 x 227 x 206 mm, weight: 2.79 kg, note: surface-mounted housing not suitable in combination with attachment (IP54) and decorative rings, emergency light versions (NT3/E3D), for accommodating 'tunableWhite' recessed luminaires, as well as for luminaires with high luminous flux (50W), pendant mounting on request, illustration: surface-mounted housing including luminaire!
Lieske Part No.: 872986

Attachment, clear for PANOS infinity / evolution DA (R) 100 mm, to achieve protection class IP54 with PANOS infinity / evolution recessed luminaires in closed ceilings, dimensions: diameter 124 x 9 mm, weight: 0.05 kg Note: Not suitable for luminaires in a flush-mounted/trimless design and combination with surface-mounted housing! Note: Not in conjunction with black reflectors (BK) and not in conjunction with emergency lighting luminaires E3D!
Lieske Part No.: 372920

Decorative ring for PANOS infinity / evolution DA (R) 100 mm, silver anodized, decorative attachment ring made of brushed aluminum, quick installation using bayonet fastening, weight: 0.04 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095583

Planar ring for PANOS infinity DA (R) 200 mm, for flush installation of PANOS infinity recessed luminaires (flush version/trimless) in plaster ceilings, made of polycarbonate (PC), glass fibre reinforced white, perforated with plaster edge, dimensions: diameter 212 x 83 mm
Lieske Part No.: 872987

Attachment, clear for PANOS infinity / evolution Q 68 mm, to achieve protection class IP54 with PANOS infinity / evolution Q recessed luminaires in closed ceilings, dimensions: 82 x 82 x 7 mm, weight: 0.02 kg Note: Not suitable for luminaires in flush/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095685

Attachment, clear for PANOS infinity / evolution Q 100 mm, to achieve protection class IP54 with PANOS infinity / evolution Q recessed luminaires in closed ceilings, dimensions: 114 x 114 x 6 mm, weight: 0.02 kg Note: Not suitable for luminaires in a flush-mounted/trimless design and in combination with surface-mounted housing! Note: Not in conjunction with black reflectors (BK) and not in conjunction with emergency lighting luminaires E3D!
Lieske Part No.: 2095684

Planar ring for PANOS infinity DA (R) 68 mm, for flush-mounted installation of PANOS infinity recessed luminaires (flush-mounted/trimless version), made of aluminium, painted white, perforated with plastering edge, dimensions: diameter 82 x 41 mm
Lieske Part No.: 381360

Concrete casting housing for DA 68 mm, for installing PANOS infinity / evolution R68 / DIAMO and VIVOII-SR recessed luminaires including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork using fastening tabs, secure fastening to the on-site formwork by additional screwing of the housing, dimensions: 300 x 150 x 155 mm, weight: 1.6 kg, note: for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800824) must be ordered separately!
Lieske Part No.: 2089421

Concrete casting housing for DA 100 mm, for installing PANOS infinity / evolution R100 recessed luminaires and DIAMO Deep Source installation rings (1-way) including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork using fastening tabs, secure attachment to the on-site formwork by additional screwing of the housing, dimensions: 500 x 200 x 155 mm, weight: 2.2 kg, Note: Can also be used in combination with PANOS infinity / evolution emergency light variant (E3D), for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800824) to be ordered separately! Note: Not in combination with PANOS infinity R100L/H/WW LED927-65/19W!
Lieske Part No.: 1348131

Concrete casting housing for DA 140x140 mm, for installing PANOS infinity / evolution Q140 and PANOS infintiy Q140 tunableWhite recessed luminaires including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork via fastening tabs, secure fastening to the on-site formwork by additional screwing of the housing, dimensions: 500 x 200 x 155 mm, weight: 2.1 kg, Note: Can also be used in combination with PANOS infinity / evolution emergency light variant (E3D), for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800824) to be ordered separately!
Lieske Part No.: 2089419

Concrete casting housing for DA 190x190 mm, for installing PANOS infinity / evolution Q190 and PANOS infintiy Q190 tunableWhite recessed luminaires including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork via fastening tabs, secure fastening to the on-site formwork by additional screwing of the housing, dimensions: 550 x 250 x 155 mm, weight: 2.5 kg, Note: Can also be used in combination with PANOS infinity / evolution emergency light variant (E3D), for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800824) to be ordered separately!
Lieske Part No.: 2089420

Installation ring (1-way) serves as a platform for flexible combination of the LED accent light module CARDAN evolution M, simple tool-free assembly of the module using a snap-in mechanism, ring made of polycarbonate (PC), white, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: diameter 145, installation depth of the LED accent light module: 170 mm, external dimensions of the ring: diameter 160x68 mm, weight: 0.07 kg, Note: Simple intuitive disassembly of the LED light module using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 1348129

Installation frame (1-way, square) serves as a platform for flexible combination of the LED accent light module CARDAN evolution M, simple tool-free assembly of the module using a snap-in mechanism, frame made of polycarbonate (PC), white, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: diameter 145, installation depth of the LED accent light module: 170 mm, external dimensions of the frame: 160x160x68 mm, weight: 0.09 kg, Note: Simple intuitive disassembly of the LED light module using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 2089464

Installation frame (2-way) serves as a platform for flexible combination of two LED accent light modules CARDAN evolution M, simple tool-free assembly of the modules using a snap-in mechanism, frame made of polycarbonate (PC), white, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: 2x diameter 145, installation depth of the LED accent light modules: 170 mm, external dimensions of the frame: 320x160x68 mm, weight: 0.19 kg, Note: Simple intuitive disassembly of the LED light modules using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 1441124

Installation ring (1-way) serves as a platform for flexible combination of the LED accent light module CARDAN evolution L, simple tool-free assembly of the module using a snap-in mechanism, ring made of polycarbonate (PC), glass fiber reinforced white, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: diameter 225, installation depth of the LED accent light module: 270 mm, external dimensions of the ring: diameter 249x68 mm, weight: 0.14 kg, Note: Simple intuitive disassembly of the LED light module using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 2089457

Installation frame (1-way, square) serves as a platform for flexible combination of the LED accent light module CARDAN evolution L, simple tool-free assembly of the module using a snap-in mechanism, frame made of polycarbonate (PC), glass fiber reinforced white, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: diameter 225, installation depth of the LED accent light module: 270 mm, external dimensions of the frame: 249x249x68 mm, weight: 0.17 kg, Note: Simple intuitive disassembly of the LED light module using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 2089456

Auxiliary tool for easy intuitive disassembly of the LED light module
Lieske Part No.: 2089455

Installation frame (1-way, square) serves as a platform for flexible combination of the LED accent light module CARDAN evolution M, simple tool-free assembly of the module using a snap-in mechanism, frame made of polycarbonate (PC), matt silver, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: diameter 145, installation depth of the LED accent light module: 170 mm, external dimensions of the frame: 160x160x68 mm, weight: 0.09 kg, Note: Simple intuitive disassembly of the LED light module using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 2091160

Connection box
Lieske Part No.: 1345862

Lieske Part No.: 552263

Kit for the mechanical connection between a standard IQ Wave suspended luminaire and a standard IQ Wave suspended luminaire. Connection plate: steel, painted white (similar to RAL9016). Cover: polycarbonate (PC), white (similar to RAL9016).
Lieske Part No.: 2090521

Ceiling canopy for the power connection of the IQ Wave pendulum version. Cover: polycarbonate (PC), white (similar to RAL9016).
Lieske Part No.: 1598116

Aquaforce Pro tension cable suspension set
Lieske Part No.: 2090487

Frame to adapt VOYAGER One surface-mounted luminaire to recessed version. Frame assembly is tool-free.
Lieske Part No.: 2091239

THORNeco 3-pin CONNY IP68 connector for the quick and safe connection of rigid, single-core or fine-stranded cables. 3-pin, IP68, cable diameter: 6.5-12mm, cross-section: 1-2.5mm², nominal voltage: 250V, nominal current: 16A, tool-free connection. Material: polyamide, weight: 0.05 kg.
Lieske Part No.: 2092502

Surface-mounted housing for 622 x 622 mm Omega Pro 2 luminaire. Housing: steel, painted Dimensions: 637 x 640 x 75 mm Weight: 2.43 kg
Lieske Part No.: 2091977

Installation frame for a 622 x 622mm Omega Pro 2 light in a plasterboard ceiling with a thickness of 12-50 mm. The installation frame is made of spot-welded sheet steel and is supplied with 4 height-adjustable leveling elements. The frame is powder-coated white, similar to RAL 9016. In order to properly insert the light into the mounting frame (including CKIT / CKIT+), there must be a clear space of 200 mm in the ceiling, and the distance to the wall should be at least 150 mm. Dimensions: 655 x 655 x 91 mm Ceiling cutout: 640 x 640mm. Weight: 1.97 kg
Lieske Part No.: 2091975

Adjustable kit (1500 mm) for suspending square or rectangular Omega Pro 2 versions. Diameter 200 mm. Centering holes: 127 mm. Weight: 0.3 kg
Lieske Part No.: 2091978

Mounting frame for flush mounting
Lieske Part No.: 2092713

Rope mounting set for ceiling mounting
Lieske Part No.: 2092714

3-pole extension cable (IP68) for 1 additional meter in the THORNeco cable system. Compatible with LEONIE, ROSY, MARY. Material: H07RN-F 3G x 1.5mm², weight: 0.16 kg.
Lieske Part No.: 2092503

3-pole extension cable (IP68) for 2 additional meters in the THORNeco cable system. Compatible with LEONIE, ROSY, MARY. Material: H07RN-F 3G x 1.5mm², weight: 0.3 kg.
Lieske Part No.: 1776344

3-pole extension cable (IP68) for 5 additional meters in the THORNeco cable system. Compatible with LEONIE, ROSY, MARY. Material: H07RN-F 3G x 1.5mm², weight: 0.73 kg.
Lieske Part No.: 1776343

3-pole extension cable (IP68) for 10 additional meters in the THORNeco cable system. Compatible with LEONIE, ROSY, MARY. Material: H07RN-F 3G x 1.5mm², weight: 1.45 kg.
Lieske Part No.: 1776345

Ring for retrofitting to reduce the installation diameter of the cutout in suspended ceilings from 250 mm to 200 mm. Made of sheet steel and aluminum. Visible ring: painted. Outer diameter of ring: 280 mm. Weight: 0.56 kg
Lieske Part No.: 2092512

Ring for retrofitting to reduce the installation diameter of the cutout in suspended ceilings from 230 - 240 mm to 200 mm. Made of sheet steel and aluminum. Visible ring: painted. Outer diameter of ring: 260 mm. Weight: 0.48 kg
Lieske Part No.: 2092511