Fastening: Suspension with wire rope, 3000 mm, including eyelet for hook (ceiling).
Lieske Part No.: 1989446

Fastening: Suspension with hooks, including quick adjustment.
Lieske Part No.: 1989342

Installation frame for LUMATRIS, for luminaire size 246 x 95 mm, silver grey.
Lieske Part No.: 2050038

Installation frame for LUMATRIS, for luminaire size 596 x 95 mm, silver grey.
Lieske Part No.: 2050039

Installation frame for LUMATRIS, for luminaire size 770 x 95 mm, silver grey.
Lieske Part No.: 2050040

Lamp holder set for MACH LED PLUS.forty, adjustable +/-90°.
Lieske Part No.: 2050041

Protective cap for MACH LED PLUS (DV) and ONE LED (DV), 10 pieces for M12 socket, DV: Through-wired (for chaining several lights).
Lieske Part No.: 2050042

Light holder set for TAMETO for C-rails (pair), adjustable, black.
Lieske Part No.: 2050043

Lamp holder set for MACH LED PLUS.seventy, adjustable +/-65°.
Lieske Part No.: 2050044

Lamp holder set for RL 40.
Lieske Part No.: 2038984

Lamp holder set for WLA system light in dusty grey, special feature 90° angle.
Lieske Part No.: 1989439

Wire rope for TAUREO and ACANEO, 3000 mm, threaded rod M8 for trapeze hanger.
Lieske Part No.: 2050045

Wire rope for TAUREO and ACANEO, 3000 mm, carabiner for eyebolts (ceiling).
Lieske Part No.: 2050046

Table clamp AVENUE, clamping range 0 - 70 mm, model TK 1 / 70, black.
Lieske Part No.: 2050047

Chain suspension for tool-free connection of the support rail using CLIX technology. Height adjustable. Fastening spring made of stainless spring steel V2A. Dimensions: 112 x 56 x 30 mm Weight: 0.08 kg
Lieske Part No.: 632965

Ceiling sensor for the detection of the incident sunlight through the window in the room, with built-in slide switch next to the terminal to switch to a higher sensitivity (up to
Or lux to 5 lux), for connection to daylight-dependent control units, using standard installation materials. The connections are made via screw terminals, housing made of flame-retardant polycarbonate, halogen-free, suitable for mounting on the ceiling, IP2 protection, protection class II, Ambient temperature 5 ° C. ... Type: 2 73
9 6 item:
ST.
Lieske Part No.: 962276

Type: 2 9285
8 item:
ST.
Lieske Part No.: 828709

Suction Cup Weight:
kg Type: 2 935455 Quantity:
ST.
Lieske Part No.: 512235

Bus power supply to the bus system with
up to 5VDC
bus, cascadable, Continuous short circuit protection. On the output side connection for bus line, polarity reversible, to supply the terminal and connection of signal relay, using standard installation material error feedback to the system possible, including status LED to indicate the operating status. Housing made ​​of flame-retardant polycarbonate, halogen-free, suitable for panel mounting on 35mm DIN rail according to EN 22 5, IP2 protection, ambient temperature to 5 ° C. Type: 2 975247 Quantity:
ST.
Lieske Part No.: 734523

Flexible connector to connect LINELIGHT lights around corners and curves. Weight: 0.63 kg
Lieske Part No.: 2090528

White cap rail cut from plastic. Weight: 0.1kg Type: 22,065,758


Quantity: 1 unit.
Lieske Part No.: 657731

Wall fastener for tool-free connection of trunking using CLIX technology. Mounting spring made of stainless steel V2A.Maximum tensile load 3 kg. Dimensions: 4 x 7 x 5 mm, weight:
kg Type: 22
28
4 item:
ST.
Lieske Part No.: 864242

DIN rail shim made of profiled steel sheet coated with white polyester resin enamel. Simple connection via electrical feed-set. Dimensions:
x 6 x 54 mm, weight:
, 7 kg Type: 22
28 2 Quantity:
ST.
Lieske Part No.: 969876

Rail made of profiled steel sheet coated with white polyester resin enamel.

Conductor embedded in an integrated Stromleitprofil. 5 network cables and 2 x 2 conductors for the integration of emergency based on two separate circuits independently and as a 2 wire control line. Simple connection via electrical feed-set. Dimensions: 25 x 6 x 54 mm, Weight: 4.5 kg Type: 22
28 42 Quantity:
ST.
Lieske Part No.: 970050

Rail made of profiled steel sheet coated with white polyester resin enamel.

Conductor embedded in an integrated Stromleitprofil. 5 network cables and 2 x 2 conductors for the integration of emergency based on two separate circuits independently and as a 2 wire control line. Simple connection via electrical feed-set. Dimensions: 35 x 6 x 54 mm, weight: 6,
kg Type: 22
28 77 Quantity:
ST.
Lieske Part No.: 704508

Circle control device with angular buttons for calling up three room scenarios (so-called moods). The active mood is displayed with a green LED. Central come/go button, which is pressed when entering and leaving the room. If the 'go' mood is active (room user absent), the come/go button is illuminated in red to aid orientation. In addition, the operator has two equipment button rockers available to intervene in the active mood, which can be used to adjust two of the room's trades. The housing and buttons are made of plastic, with a satin finish, white. All buttons are printed with intuitive pictograms. Installation takes place in a simple standard Euro box or a UK metal back box (not included in delivery); screws are not visible after installation. The control device is connected to the bus and optionally to the supply (both can be reversed) using a screw terminal. The power supply is via an external power supply 24VDC or AC, 300mW (not included) or directly via the bus. Dimensions: 87 x 87 x 13 mm, weight: 0.15 kg.
Lieske Part No.: 553429

Circle control device with angular buttons for calling up three room scenarios (so-called moods). The active mood is displayed with a green LED. Central come/go button, which is pressed when entering and leaving the room. If the 'go' mood is active (room user absent), the come/go button is illuminated in red to aid orientation. In addition, the operator has two equipment button rockers available to intervene in the active mood, which can be used to adjust two of the room's trades. The housing and buttons are made of plastic, with a satin finish, anthracite. All buttons are printed with intuitive pictograms. Installation takes place in a simple standard Euro box or a UK metal back box (not included in delivery); screws are not visible after installation. The control device is connected to the bus and optionally to the supply (both can be reversed) using a screw terminal. The power supply is via an external power supply 24VDC or AC, 300mW (not included) or directly via the bus. Dimensions: 87 x 87 x 13 mm, weight: 0.15 kg.
Lieske Part No.: 305262

Interface software 500 data points for data exchange between the ZUMTOBEL lighting management solution LUXMATE LITENET and a building management system using the official OPC standard (OLE for Process Control) Extract of data points: Operating the system: Adjusting the brightness of the artificial light, adjusting the position and slat angle of the blinds, adjusting the position of the windows, calling up the mood Display status: Brightness setting of the lighting, position/slat angle of the blinds, position of the windows, current mood LM-4WZS: Rain, outside temperature, wind direction, wind speed, device errors, fault messages, presence messages, emergency light function: Initiate function test in LITENET, initiate operating time test in LITENET, report emergency light error as a total error
Lieske Part No.: 511144

10 year block battery, type VLRA, sealed, rechargeable 10 year design life at 20° ambient temperature High performance grid plates (lead/calcium) Fleece technology ABS housing and cover Recessed poles with copper core, screwable inside Extremely low gassing, low self-discharge No transport restrictions 100% recyclable Maintenance-free over the entire service life The battery pack must not be stored without a battery charge for longer than 2 months after delivery. The battery pack must be connected to the system after 2 months at the latest. If these instructions are not followed, any liability or warranty claims will be rejected.
Lieske Part No.: 771199

10 year block battery, type VLRA, sealed, rechargeable 10 year design life at 20° ambient temperature High performance grid plates (lead/calcium) Fleece technology ABS housing and cover Recessed poles with copper core, screwable inside Extremely low gassing, low self-discharge No transport restrictions 100% recyclable Maintenance-free over the entire service life The battery pack must not be stored without a battery charge for longer than 2 months after delivery. The battery pack must be connected to the system after 2 months at the latest. If these instructions are not followed, any liability or warranty claims will be rejected.
Lieske Part No.: 570539

10 year block battery, type VLRA, sealed, rechargeable 10 year design life at 20° ambient temperature High performance grid plates (lead/calcium) Fleece technology ABS housing and cover Recessed poles with copper core, screwable inside Extremely low gassing, low self-discharge No transport restrictions 100% recyclable Maintenance-free over the entire service life The battery pack must not be stored without a battery charge for longer than 2 months after delivery. The battery pack must be connected to the system after 2 months at the latest. If these instructions are not followed, any liability or warranty claims will be rejected.
Lieske Part No.: 453464

TP-NetCom software license for direct Ethernet connection and use of third-party touch panels to a LITENET lighting management system, enables data query and control via one or more third-party touch panels, query and control takes place in ASCII plain text data format, extensive and open protocol, detailed LITENET TP-NetCom manual.
Lieske Part No.: 908621

Universal Input 4x enclosure with four from each independently addressable inputs for integrating conventional sensors, switches, motion detectors, timers or other contactor in a busgeführtes light and space management system. Free configuration possible by authorized service personnel. Depending on the addressing of an input all the actuators of a room or space of an actuator group can be controlled. Input Voltage 230V AC, 50/60Hz, for mounting on 35mm DIN rail according to EN 50022, Size 4 TE à 17.5 mm, material flame retardant polycarbonate, halogen-free, light gray. Bus and mains cable to the inputs of the device screw. Contactor designed for screw mounting for at least 230VAC, leads to the inputs of the device.

Type: 22154732
Quantity: 1 unit.
Lieske Part No.: 315393

L-connector white. Dimensions: 135mm x 365mm x 60mm. Weight: 1.62 kg Type: 22,157,274


Quantity: 1 unit.
Lieske Part No.: 328209

T-connector white. Dimensions: 500mm x 365mm x 60mm. Weight: 2.18 kg Type: 22,157,279


Quantity: 1 unit.
Lieske Part No.: 655001

Suspension type: 22
57562 item:
ST.
Lieske Part No.: 925869

Strain relief made of galvanized sheet steel, with integrated device for clamping the feed cables.
Lieske Part No.: 926833

Package: Silver control unit, bus supply, flexible and cost-effective scene lighting control, for controlling up to 64 DALI-compatible operating devices. Package consists of control unit and power supply. Control unit: with circularly aligned buttons for calling up three lighting scenarios. Central, illuminated come/go button and two rocker switches, to which two lighting groups are assigned. Housing and buttons are made of silver plastic, satin finish, dimensions: 87 x 87 x 13 mm. Easy installation in on-site single socket. Supply via DALI control line (no mains connection), current consumption 6mA (3 DALI loads). Power supply: for up to 64 participants or 100 DALI loads (max. 200mA). Short-circuit and voltage-proof against 230/240V external voltage. Made of flame-retardant polycarbonate, halogen-free. Installation in cable ducts or ceiling recess, permissible ambient temperature: 0°C to +50°C. Protection class IP20, dimensions: 101.5 x 29.5mm.
Lieske Part No.: 547549

Digital output device to the control of two separate lighting groups. Two control outputs each individual, automatic switching for DSI and DALI compatible lamp ballasts. Maximum of 25 per DALI or DSI ballasts per output 5 channel. Mittles verpolbarer two-wire connection control cable and standard installation materials. Dimming range:
to
%.The lighting controller has a built-
ampere relay, which optionally with disabled lamp ballasts this is the lamp additionally stress-free devices. On the input side connection for commercial light-single or double switch, optional connection for light key value, optional connection for 23 volt motion. Optional accessories can not be integrated without addressing and commissioning: light sensor, infrared sensor for IR remote control, scene control device, input module for switch integration and presence detectors. The connections are made ​​via screw terminals. Housing in cabinet design made ​​of flame-retardant polycarbonate, halogen free, gray (RAL 7 4), suitable for mounting on 35mm DIN rail according to EN 5 22 protection IP2, with status LED and test button, ambient temperature to 5 ° C Type: 22
6
822 sales unit:
ST.
Lieske Part No.: 751296

DALI/DSI control unit installation for simultaneous control of up to 25 DALI or DSI compatible lamp operating devices, dimming range 1 to 100%, two-wire control cable on the output side, polarity can be reversed, use of standard installation material. On the input side, connection option for commercially available single or double light buttons, optional connection option for scene buttons, optional connection option for motion detectors, connections are made via plug-in terminals, housing made of polycarbonate (PC), flame-retardant, halogen-free, suitable for luminaire installation or ceiling installation, protection class IP20, protection class II with mounted strain relief. Dimensions: 281 x 50 x 21 mm, weight: 0.14 kg
Lieske Part No.: 946770

DALI/DSI daylight/presence control device for the simultaneous control of two groups of lights depending on the amount of daylight in the room. A sensor detects the outside brightness and uses control characteristics to determine the correct dimming level of the groups of lights. Up to 25 DALI or DSI compatible lamp control devices per output channel, dimming range 1 to 100%, connections are made via plug-in terminals, housing made of polycarbonate (PC), flame-retardant, halogen-free, suitable for luminaire installation or ceiling installation, dimensions: 281 x 50 x 21 mm, weight: 0.14 kg
Lieske Part No.: 741527

Elliptical canopy with 5 single-pole terminals in white made of plastic polycarbonate (PC) with clamping options.
Lieske Part No.: 377195

Installation frame for ARTSIGN 75 P MRC (ceiling installation) safety sign lights. As edge protection for plasterboard or fibreboard with a ceiling thickness of approx. 12.5 mm. Galvanized sheet steel, installation on the rear, fastening by gluing or screwing, cut-out dimensions: 180+/-2 x 49+/-1 mm, dimensions: 260 x 70 x 13 mm, weight: 0.09 kg
Lieske Part No.: 1439120

Installation frame for ARTSIGN 75 P MRC (recessed ceiling) safety sign lights. Installation with edge upwards so that the ARTSIGN can be installed on ceilings with a thickness of 1 to 12 mm. Installation with edge downwards: as edge protection for plasterboard or fiberboard with a ceiling thickness of approx. 25 mm. Galvanized sheet steel, installation on the back, fastening by gluing or screwing, cut-out dimensions: 180+/-2 x 49+/-1 mm, dimensions: 260 x 70 x 25 mm, weight: 0.12 kg
Lieske Part No.: 2095491

Concrete casting housing, galvanized sheet steel, for mounting the ARTSIGN ED in concrete ceilings or with subsequent plastering. Prepared for pipe installation. Protection type: IP40. Protection class: SC1, dimensions: 182 x 93 x 114 mm, weight: 0.5 kg.
Lieske Part No.: 378460

Rope suspension for mounting the CUBESIGN safety sign light. Continuous height adjustment up to 5 m possible.
Lieske Part No.: 373057

Concrete casting housing, galvanized sheet steel, for mounting the PURESIGN/COMSIGN ED in concrete ceilings. Prepared for pipe installation. Dimensions: 400 x 83 x 85 mm, weight: 0.68 kg.
Lieske Part No.: 873380

Connectors including cables, screws and strain reliefs for suspension height 1000 mm.
Lieske Part No.: 653217

Rope suspension including ceiling rosette and strain relief for suspension height 1000 mm.
Lieske Part No.: 653204

Lieske Part No.: 365172