Installation Material

Can be used as a screw or adhesive base. Perfect system solution in combination with cable ties. Special design keeps the cable tie in position. Assembly processes are simplified. Very good initial adhesion that increases over time. Innovative fastening solution for high and low energy surfaces. Q-Mount fastening bases in combination with Q-tie cable ties ensure reliable and permanent fastening. With the special SolidTack adhesive, the Q-Mount is an innovative fastening solution for low energy surfaces and where drilling holes is not desired or possible. The adhesive bases are suitable for a wide range of applications on painted surfaces, plastics or metals. The base is used in areas such as control cabinet construction, rail vehicle construction, aerospace, automobiles and agricultural machinery.
Sales unit: 10 pieces
Lieske Part No.: 677341

Klebesockel zum Halten und Führen von Flachbandleitungen. SolidTack-Serie mit Hochleistungskleber aus homogenem Acrylat. Sehr gute Anfangshaftung die sich mit der Zeit noch erhöht. Kleber mit hoher Kohäsionskraft und guter Witterungsbeständigkeit. Innovative Befestigungslösung für hoch- und niederenergetische Oberflächen. Schutzfolie mit Überstand erleichtert das Abziehen. Die SolidTack Sockel sind eine innovative Befestigungslösung für hoch- und niederenergetische Oberflächen. Sie bieten eine Alternative überall dort, wo Schraubbefestigungen nicht möglich sind. SolidTack Befestigungssockel können für eine Vielzahl von Anwendungen eingesetzt werden. Dazu gehören pulverlackbeschichtete oder lackierte Oberflächen, Metalloberflächen oder Kunststoffverkleidungen und -bauteile in diversen Bereichen wie Schaltschränken, Schienenfahrzeug-, Flugzeug-, Fahrzeug- und Landmaschinenbau.
Sales unit: 25 pieces
Lieske Part No.: 2146043

für ein oder zwei Solarleitungen. sicherer Halt der Leitungen. einfaches tauschen der Leitungen im Wartungsfall. für Kanten 1,0 - 3,0 mm. Unser EC1-3SPDHC6-6 ist perfekt für die Verlegung von Solarleitungen. Der Artikel kann durch einfaches aufstecken per Hand auf Solarmodule appliziert werden. Danach können bis zu zwei Leitungen durch einfaches eindrücken in den Halter sicher geführt werden.
Sales unit: 1000 pieces
Lieske Part No.: 1567624

für ein oder zwei Solarleitungen. sicherer Halt der Leitungen. einfacher Tausch von Leitungen im Wartungsfall. für Kanten 1,0 - 3,0 mm. Unser EC1-3SPDHC6-7 ist perfekt für die Verlegung von Solarleitungen. Der Artikel kann durch einfaches Aufstecken per Hand auf Solarmodule appliziert werden. Danach können bis zu zwei Leitungen durch einfaches Eindrücken in den Halter sicher geführt werden.
Sales unit: 100 pieces
Lieske Part No.: 2094433

For parallel guidance of two bundles that can be rotated 360° relative to each other. The H-design ensures a good form fit to the bundled goods. The head of the tie can be brought into the optimal bundle position. For cable ties up to 12.7 mm wide. Also for subsequent assembly of bundled goods. These elements were developed for the automotive and truck industries, but can be used in any area where a connection of two bundles and a defined distance are required.
Sales unit: 50 pieces
Lieske Part No.: 301756

Design ermöglicht sicheren Formschluss zum Bündelgut. Konventionelle Kabelschellen können ersetzt werden. Bevorratung verschiedener Schellengrößen nicht mehr notwendig. Für Schwerlastkabelbinder bis 13,5-mm-Breite. Wartung der Bündel durch einfachen Kabelbindertausch möglich. Entwickelt für die Automobil- bzw. LKW-Industrie werden Heavy Duty Mounts (HDM) überall dort eingesetzt, wo eine robuste, sichere und dauerhafte Bündelung gewünscht ist. Ebenfalls gehören der Schienenfahrzeugbau sowie die Verteidigungs- und Agrarindustrie zu den Fokusmärkten.
Sales unit: 500 pieces
Lieske Part No.: 705700

Type: QM20-PA66-NA-C1 item: 1 ST.
Sales unit: 100 pieces
Lieske Part No.: 136780

Type: QM30-PA66-NA-C1 item: 1 ST.
Sales unit: 100 pieces
Lieske Part No.: 754057

Besondere Form der Kabelbandaufnahme hält den Q-tie Kabelbinder während der Montage an seinem Platz. Mit zwei Schrauben zu befestigen. Kabelbinder kann von vier Seiten eingeschlauft werden. Extra schnelle und flexible Montage in Kombination mit Q-tie Kabelbindern. Q-Mount Montagesockel sind ideal für das Halten unserer innovativen Q-tie Kabelbinder geeignet. Sie eignen sich für alle Anwendungen, bei denen eine zuverlässige und dauerhafte Fixierung erforderlich ist.
Sales unit: 50 pieces
Lieske Part No.: 948925

Type: QM20A-PA66-NA-C1

Sales unit: 100 pieces
Lieske Part No.: 613847

Type: QM30A-PA66-NA-C1

Sales unit: 100 pieces
Lieske Part No.: 526419

Type: QM40A-PA66-NA-L1

Sales unit: 50 pieces
Lieske Part No.: 571840

Besondere Form der Kabelbandaufnahme hält den Q-tie Kabelbinder während der Montage an seinem Platz. Mit zwei Schrauben zu befestigen. Kabelbinder kann von vier Seiten eingeschlauft werden. Extra schnelle und flexible Montage in Kombination mit Q-tie Kabelbindern. Q-Mount Montagesockel sind ideal für das Halten unserer innovativen Q-tie Kabelbinder geeignet. Sie eignen sich für alle Anwendungen, bei denen eine zuverlässige und dauerhafte Fixierung erforderlich ist.
Sales unit: 100 pieces
Lieske Part No.: 163272

Special shape of the cable tie holder keeps the Q-tie cable tie in place during installation. Fastened with two screws. Cable tie can be looped in from four sides. Extra quick and flexible installation in combination with Q-tie cable ties. Q-Mount mounting bases are ideal for holding our innovative Q-tie cable ties. They are suitable for all applications where reliable and permanent fixation is required.
Sales unit: 100 pieces
Lieske Part No.: 2057040

Type: QM20A-PA66-BK-C1

Sales unit: 100 pieces
Lieske Part No.: 347744

Type: QM30A-PA66-BK-C1

Sales unit: 100 pieces
Lieske Part No.: 855349

Type: QM40A-PA66-BK-L1

Sales unit: 50 pieces
Lieske Part No.: 368128

Type: CTQM5-PA66-NA-C1

Sales unit: 100 pieces
Lieske Part No.: 160528

Type: CTQM5-PA66-BK-C1

Sales unit: 100 pieces
Lieske Part No.: 478582

Type: TY3G1S PA66W BK 100 ST

Sales unit: 100 pieces
Lieske Part No.: 717673

Self-adhesive base, halogen-free cable for all bands up to 4 mm range. The curved plate provides good support for larger cable bundles Material: Polyamide 6.6 Colour: natural temperature range: -4 ° C to +85 ° C cable tie Max. Width: 4 mm Dimensions (L x W): 2 x
4 Type: TY3G
S-N66-NA-C

ST.
Sales unit: 100 pieces
Lieske Part No.: 530902

Type: TY8G1S PA66W BK ST 100 Quantity: 1 ea.
Lieske Part No.: 668160

Self-adhesive base, halogen-free
Universally applicable.For cable tie
8 mm width, the curved plate provides good
support for larger cable bundles
Material: Polyamide 6.6
Color: natural
Temperature range: -40 ° C to +85 ° C
max cable ties. Width: 8.0 mm
Dimensions (L x W): 32 x 25 Type: TY8G1S-N66-NA-C1


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 148605

Self-adhesive base, halogen-free for stranded wire, cables, wires, etc., for stranded wire, cables, wires, etc. from 3 to
8 mm in diameter. Material: Polyamide 6.6 Colour: natural temperature range: -4 ° C to +85 ° C Dimensions (L x W):
3 x
3 Type: RA3-N66-NA-C

ST.
Sales unit: 100 pieces
Lieske Part No.: 834604

Self-adhesive base, halogen-free
for stranded wire, cables, wires, etc.
for stranded wire, cables, wires, etc. 3-18 mm
Diameter.
Material: polyamide 6.6
Color: natural
Temperature range: -40 ° C to +85 ° C

Dimensions (L x W): 19 X 19

Type: RA6-N66-NA-C1
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 273526

Self-adhesive base, halogen-free for stranded wire, cables, wires, etc., for stranded wire, cables, wires, etc. from 3 to
8 mm in diameter. Material: Polyamide 6.6 Colour: natural temperature range: -4 ° C to +85 ° C Dimensions (L x W):
9 x
9 Type: RA9-N66-NA-C

ST.
Sales unit: 100 pieces
Lieske Part No.: 985920

Self-adhesive base, halogen-free
for stranded wire, cables, wires, etc.
for stranded wire, cables, wires, etc. 3-18 mm
Diameter.
Material: polyamide 6.6
Color: natural
Temperature range: -40 ° C to +85 ° C Dimensions (L x W): 25 X 25 Type: RA13-N66-NA-C1




Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 638861

Self-adhesive base, halogen-free for stranded wire, cables, wires, etc., for stranded wire, cables, wires, etc. from 3 to
8 mm diameter. Material: Polyamide 6.6 Colour: natural temperature range: -4 ° C to +85 ° C Dimensions (L x W): 28 X 28 Type: RA
8-N66-NA-C

ST.
Sales unit: 100 pieces
Lieske Part No.: 546800

Selbstklebender Sockel zur schnellen und einfachen Montage. Befestigungslösung ohne zusätzlichen Kabelbinder. Bietet Potential zur Prozessoptimierung. Entwickelt, um Schläuche, Leitungen und Kabelbündel zu halten. Verschiedene Größen für verschiedene Bündeldurchmesser erhältlich. Es können zwei Typen von Kleber angeboten werden. Die RA Befestigungssockel sind eine ideale Lösung für alle Anwendungen, die schwer zugänglich sind oder bei denen nur selbstklebende Befestigungslösungen eingesetzt werden dürfen und das Schrauben inakzeptabel ist. RA Befestigungssockel benötigen keinen zusätzlichen Kabelbinder. Sie bieten Potential zur Prozessoptimierung in der Automobilindustrie, im Bereich Nutzfahrzeuge oder im Gewerbebau.
Sales unit: 100 pieces
Lieske Part No.: 843727

Low profile design for applications where space is limited. Self-adhesive bases for quick and easy installation. Used without additional cable ties. Offers potential for process optimization. Various sizes available for different bundle diameters. Cost-effective solution and easy installation. Suitable for applications on smooth, clean surfaces. The RB series self-adhesive bases offer greater routing freedom and reduce the risk of corrosion compared to screw fastenings. They are ideal for tool-free installation and can be reopened and reused. This is especially useful when bundles need to be replaced quickly and easily. The RB series can be used without cable ties and offers process optimization potential for a wide range of applications.
Sales unit: 1000 pieces
Lieske Part No.: 982589

Flaches Design für Anwendungen mit engen Platzverhältnissen. Selbstklebende Sockel zur schnellen und einfachen Montage. Wird ohne zusätzlichen Kabelbinder verwendet. Bietet Potential zur Prozessoptimierung. Verschiedene Größen für verschiedene Bündeldurchmesser erhältlich. Kostengünstige Lösung und einfache Installation. Geeignet für Anwendungen auf glatten, sauberen Oberflächen. Die selbstklebenden Sockel der RB-Serie bieten eine größere Führungsfreiheit und reduzieren das Korrosionsrisiko im Vergleich zu Schraubbefestigungen. Sie eignen sich hervorragend für die werkzeuglose Installation und können wieder geöffnet und erneut verwendet werden. Dies ist vor allem dann hilfreich, wenn Bündel schnell und einfach ausgetauscht werden müssen. Die RB-Serie kann ohne Kabelbinder verwendet werden und bietet Prozessoptimierungspotential für eine Vielzahl von Anwendungen.
Sales unit: 100 pieces
Lieske Part No.: 176044

Low profile design for applications where space is limited. Self-adhesive bases for quick and easy installation. Used without additional cable ties. Offers potential for process optimization. Various sizes available for different bundle diameters. Cost-effective solution and easy installation. Suitable for applications on smooth, clean surfaces. The RB series self-adhesive bases offer greater routing freedom and reduce the risk of corrosion compared to screw fastenings. They are ideal for tool-free installation and can be reopened and reused. This is especially useful when bundles need to be replaced quickly and easily. The RB series can be used without cable ties and offers process optimization potential for a wide range of applications.
Sales unit: 50 pieces
Lieske Part No.: 1135033

Type: RB5 PA66 NA 100 ST

Sales unit: 100 pieces
Lieske Part No.: 383433

Type: RB8-N66-NA-H1

Sales unit: 5000 pieces
Lieske Part No.: 825153

Type: CTC10FT6-HIRHS-BK-D1

Sales unit: 500 pieces
Lieske Part No.: 565634

Type: CTC7.5FT6LG-HIRHS-BK

Sales unit: 500 pieces
Lieske Part No.: 523737

Ribbon cable Self-adhesive holder, halogen-free
, the FKH-Series is available in four different sizes
available can with tape an d also
be attached to a M3 screw. By the
simple clip method, can the holder
quickly and easily open and close again.
's flexible wings provide gentle
attachment of the cable. Damage
be prevented. material properties: Material: Polyamide 6.6 High Impact Modified



Color: black
Operating temp. -40 ° C to +85 ° C, intermittent +105 ° C (for 500 h)
Design: For flat cables up to 25 mm Type: FKH25A-HIR-BK-C1


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 140962

The HellermannTyton ribbon cable holders are used for securing and guiding of flat cables and are available in four different sizes. Optionally, the FKH are secured with high-quality acrylic adhesive or M3 screws. Thanks to the practical clip fastener allows the holder quickly and easily open and close. The ribbon cable holder is made of high-quality, impact-modified polyamide 6.6 and hence can be used even in very dry areas. The rounded edges and extremely soft wings any flat cable is guided and held gently. Type: A FKH3 PA66HIR BK
ST
ST.
Sales unit: 100 pieces
Lieske Part No.: 830204

One-piece mounting base for ribbon cables and round cables. Raised mounting surface ensures proper bonding. Quick and easy installation. Can be opened and reused. Cables are gently attached using soft holders. FKH bases are used to attach ribbon cables in information electronics, in consumer electronics or to connect sensors. Since each installation scenario is individual, FKH bases are available in different dimensions and can be supplied as self-adhesive and/or screwable versions.
Sales unit: 100 pieces
Lieske Part No.: 304235

One-piece mounting base for ribbon cables. Raised mounting surface ensures proper bonding. Quick and easy installation. Can be opened and reused. Cables are gently secured using soft holders. FKH bases are used to securely guide ribbon cables. These mounting bases are usually used in information and entertainment electronics or they are used to attach and guide sensor connections. To cover every individual application, FKH bases are available in different sizes. They can be supplied as self-adhesive or screwable versions.
Sales unit: 2000 pieces
Lieske Part No.: 2054871

One-piece mounting base for ribbon cables. Raised mounting surface ensures proper bonding. Quick and easy installation. Can be opened and reused. Cables are gently secured using soft holders. FKH bases are used to securely guide ribbon cables. These mounting bases are usually used in information and entertainment electronics or they are used to attach and guide sensor connections. To cover every individual application, FKH bases are available in different sizes. They can be supplied as self-adhesive or screwable versions.
Sales unit: 100 pieces
Lieske Part No.: 1580407

One-piece mounting base for ribbon cables. Raised mounting surface ensures proper bonding. Quick and easy installation. Can be opened and reused. Cables are gently secured using soft holders. FKH bases are used to securely guide ribbon cables. These mounting bases are usually used in information and entertainment electronics or they are used to attach and guide sensor connections. To cover every individual application, FKH bases are available in different sizes. They can be supplied as self-adhesive or screwable versions.
Sales unit: 100 pieces
Lieske Part No.: 1580406

Available as a screw or adhesive base. Optimal hold of the bundle thanks to the curved plate. The binder can be threaded in from two directions. Perfect for applications with tight installation conditions. The TY series has a rectangular design and is used primarily in the areas of telecommunications, control cabinet construction and industrial series production. The TY mounting bases are very robust and hold the bundle firmly in place even in the event of high vibrations. TY3G1 is very narrow in direct comparison with other mounting bases and can still find a place even in tight installation spaces.
Sales unit: 100 pieces
Lieske Part No.: 134333

Available as a screw or adhesive base. Optimal hold of the bundle thanks to the curved plate. The binder can be threaded in from two directions. Perfect for applications with tight installation conditions. The TY series has a rectangular design and is used primarily in the areas of telecommunications, control cabinet construction and industrial series production. The TY mounting bases are very robust and hold the bundle firmly in place even in the event of high vibrations. TY3G1 is very narrow in direct comparison with other mounting bases and can still find a place even in tight installation spaces.
Sales unit: 100 pieces
Lieske Part No.: 672809

Type: TY8H1-N66-NA-C1

Sales unit: 100 pieces
Lieske Part No.: 585054

Rational solution for parallel bundling. Installation possible with just two screws. Flexible bundle diameters by combining cable ties of different lengths. Suitable for a wide range of elongated holes. These fastening elements are used for parallel cable routing in control cabinet and mechanical engineering as well as in military systems.
Sales unit: 100 pieces
Lieske Part No.: 2054877

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 986167

Mounting socket screw KR6 / 8, halogen-free
, the compact mounting base KR stands
out due to the pronounced curvature, the
safe guidance of cables and
allows cable harnesses. For cable tie widths
of 6 or 8 mm. Material: polyamide 6.6, color:
nature, temperature range: -40 ° C to +85 ° C
max cable ties. Width: 6.00 mm
Dimensions (L x W): 18 x 12 Type: KR6G5-N66-NA-C1


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 678977

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 720738

Mounting socket screw KR6 / 8, halogen-free KR The compact mounting base is characterized by the pronounced curvature, which allows secure management of cables and cable harnesses. For cable tie widths of 6 or 8 mm. Material: polyamide 6.6, color: nature, temperature range: -4 ° C to +85 ° C max cable ties. Width: 8 mm Dimensions (L x W): 25 x
4 Type: KR8G5-N66-NA-C

ST.
Sales unit: 100 pieces
Lieske Part No.: 805595