Products of Klauke
Categories with products from Klauke
- Light & Sound ➤ Illuminants ➤ Bulbs ➤ Glow lamps and dwarf ( 1 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ Small connector ( 1 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Servicesprays ( 2 )
- Electrics ➤ Installation ➤ Terminals ➤ Shield-Kon ( 14 )
- Electronics ➤ Measurement ➤ Measuring Instruments ➤ Spirit Levels ( 3 )
- IT-Equipment ➤ Networks ➤ Junction boxes ➤ Cat6 ( 1 )
- IT-Equipment ➤ Networks ➤ Switches ➤ Miscellaneous ( 1 )
- IT-Equipment ➤ Office Equipment ➤ POS Consumables ➤ Wristbands ( 2 )
- Technology ➤ Tools ➤ Cable Pulling Systems ( 31 )
- Technology ➤ Tools ➤ Knifes ( 14 )
- Technology ➤ Tools ➤ Miscellaneous ( 423 )
- Technology ➤ Tools ➤ Pliers ➤ Pliers Kits ( 2 )
- Technology ➤ Tools ➤ Power Tool Accessories ➤ Multi-Cutter Accessories ( 1 )
- Technology ➤ Tools ➤ Power Tools ➤ Pressure Washers ( 11 )
- Technology ➤ Tools ➤ Punches ( 119 )
- Technology ➤ Tools ➤ Safety & Workwear Equipment ➤ Workwear ( 3 )
- Technology ➤ Tools ➤ Saws ( 3 )
- Technology ➤ Tools ➤ Screwdrivers ( 24 )
- Technology ➤ Tools ➤ Tool Storage ➤ Toolboxes ( 3 )
- Technology ➤ Tools ➤ Wrenches ( 11 )
 |
 KLAUKE 509RLD 509RLDKLAUKE 509RLD Pressverbinder 10-30kV längsdicht 120qmm zugentlast. E-Cu blankRohrabmessung nach DIN 46267 Teil 1. Mit Kennziffer zur eindeutigen Werkzeugzuordnung. Für Cu-Mittelspannungskabelverbindungen 10-30 kV. Mit abgeschrägten Kanten für reduzierten Wickelaufwand bei ... Lieske Part No.: 492221 Mfg Part No: 509RLD |
17,06 EUR
 ≈ £14.57 | ≈ $19.41
Delivery time on requestinfo_outline
|
 |
Klauke 50R10 50R10Klauke 50R10 angle cable lug , 150 sq mm 90 degree M10 For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 833520 Mfg Part No: 50R10 |
67,06 EUR
≈ £57.27 | ≈ $76.31
Delivery time on requestinfo_outline
|
 |
Klauke 50R1045Klauke 50R1045 angle cable lug , 150qmm angled 45 degrees 17mm For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 267059 Mfg Part No: 50R1045 |
76,71 EUR
≈ £65.51 | ≈ $87.30
Delivery time on requestinfo_outline
|
 |
Klauke 50R12Klauke 50R12 tubular cable lug 90° 150qmm M12 E-Cu galvanized For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 654815 Mfg Part No: 50R12 |
62,02 EUR
≈ £52.97 | ≈ $70.58
Delivery time on requestinfo_outline
|
 |
KLAUKE 50R1245Klauke 50R1245 tubular cable lug 45° 150qmm M12 E-Cu galvanized For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 472042 Mfg Part No: 50R1245 |
70,20 EUR
≈ £59.95 | ≈ $79.89
Delivery time on requestinfo_outline
|
 |
Klauke 50R8Klauke 50R8 tubular cable lug 90° 150qmm M8 E-Cu galvanized For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 386860 Mfg Part No: 50R8 |
67,24 EUR
≈ £57.42 | ≈ $76.52
Delivery time on requestinfo_outline
|
 |
KLAUKE 50R845KLAUKE 50R845 tube cable lug 45 ° 150qmm, M8 E-Cu galv.verz. For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 814887 Mfg Part No: 50R845 |
76,52 EUR
≈ £65.35 | ≈ $87.08
Delivery time on requestinfo_outline
|
 |
Klauke 51040060Klauke 51040060 stamp PG16 f.einen, portable C-Frame Stanzbügel For C-Frame punching bracket. Fast punching in one operation - no pre-drilling required. Pg16 Lieske Part No.: 373169 Mfg Part No: 51040060 |
28,51 EUR
≈ £24.35 | ≈ $32.44
Delivery time on requestinfo_outline
|
 |
Klauke 51069720Klauke 51069720 die , Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 293532 Mfg Part No: 51069720 |
20,00 EUR
≈ £17.08 | ≈ $22.76
Delivery time on requestinfo_outline
|
 |
Klauke 51147220Klauke 51147220 die 51,147,220 22.5 mm, Slug-Buster For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation. Lieske Part No.: 756414 Mfg Part No: 51147220 |
16,93 EUR
≈ £14.46 | ≈ $19.27
Delivery time on requestinfo_outline
|
 |
KLAUKE 511RKLAUKE 511R compression connector 185 sqmm , E-copper Pipe dimensions according to DIN 46267 Part 1. With code number for clear tool assignment. For copper medium-voltage cable connections 10-30 kV. With bevelled edges for reduced winding effort during ... Lieske Part No.: 749688 Mfg Part No: 511R |
71,75 EUR
≈ £61.27 | ≈ $81.65
Delivery time on requestinfo_outline
|
 |
Klauke 51300430Klauke 51300430 draw bolt for hydraulic actuation D9.5x71mm To increase the service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. d: 9.5 x 71 mm Lieske Part No.: 693784 Mfg Part No: 51300430 |
14,01 EUR
≈ £11.96 | ≈ $15.94
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
 |
Klauke 51319760 51319760Klauke 51319760 Slug-Buster stamp 47mm PG36 max. steel (ST37) 3mm For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation. Lieske Part No.: 671448 Mfg Part No: 51319760 |
125,04 EUR
≈ £106.78 | ≈ $142.30
Delivery time on requestinfo_outline
|
|
|
KLAUKE 51320090 51320090KLAUKE 51320090 Matrize 47,0mm Matrize 47,0 mm Verkaufseinheit: 1 ST. Lieske Part No.: 512127 Mfg Part No: 51320090 |
63,66 EUR
≈ £54.37 | ≈ $72.45
Delivery time on requestinfo_outline
|
 |
Klauke 514RLDKlauke 514RLD compression connector 400 sqmm , E-copper Pipe dimensions according to DIN 46267 Part 1. With code number for clear tool assignment. For copper medium-voltage cable connections 10-30 kV. With bevelled edges for reduced winding effort during ... Lieske Part No.: 549601 Mfg Part No: 514RLD |
62,08 EUR
≈ £53.02 | ≈ $70.65
Delivery time on requestinfo_outline
|
 |
Klauke 51R10Klauke 51R10 angle cable lug , 185 sq mm 22 mm 90 degrees For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 206434 Mfg Part No: 51R10 |
79,00 EUR
≈ £67.47 | ≈ $89.90
Delivery time on requestinfo_outline
|
 |
KLAUKE 51R1045KLAUKE 51R1045 185 sq mm cable lug angle 45 degrees, 22 mm For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 312089 Mfg Part No: 51R1045 |
90,12 EUR
≈ £76.96 | ≈ $102.56
Delivery time on requestinfo_outline
|
 |
Klauke 51R12Klauke 51R12 tubular cable lug 90° 185qmm M12 E-Cu galvanized For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 611268 Mfg Part No: 51R12 |
78,75 EUR
≈ £67.25 | ≈ $89.62
Delivery time on requestinfo_outline
|
|
|
Klauke 51R1245Klauke 51R1245 cable lug angle , 185 sq. mm 45 ° 22 mm For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 586894 Mfg Part No: 51R1245 |
90,15 EUR
≈ £76.99 | ≈ $102.59
Delivery time on requestinfo_outline
|
 |
Klauke 51R16Klauke 51R16 angle cable lug , 185 sq mm 22 mm 90 degrees For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 530107 Mfg Part No: 51R16 |
77,06 EUR
≈ £65.81 | ≈ $87.69
Delivery time on requestinfo_outline
|
 |
Klauke 52020113Klauke 52020113 replacement screw , To increase the service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. 9.5 x 88 mm Lieske Part No.: 155209 Mfg Part No: 52020113 |
80,29 EUR
≈ £68.57 | ≈ $91.37
Delivery time on requestinfo_outline
|
 |
KLAUKE 52033816Klauke 52033816 special shape hole punch 36x52mm for heavy connectors Type: 52033816 Sales unit: 1 pc Lieske Part No.: 391986 Mfg Part No: 52033816 |
953,07 EUR
≈ £813.92 | ≈ $1,084.59
Delivery time on requestinfo_outline
|
 |
Klauke 52033817Klauke 52033817 Punch for heavy connectors The rectangular punches for heavy connectors are equipped with a drilling template integrated into the die for drilling the 4 fastening holes. Suitable for sheet steel (St37) up to 3.0 mm thick and ... Lieske Part No.: 747051 Mfg Part No: 52033817 |
1.064,25 EUR
≈ £908.87 | ≈ $1,211.12
Delivery time on requestinfo_outline
|
 |
Klauke 52033818Klauke 52033818 special shape punches, 36x86mm f.schwere Connectors The rectangular punches for heavy connectors are equipped with a drilling template integrated into the die for drilling the 4 fastening holes. Suitable for sheet steel (St37) up to 3.0 mm thick and ... Lieske Part No.: 133493 Mfg Part No: 52033818 |
1.197,90 EUR
≈ £1,023.01 | ≈ $1,363.21
Delivery time on requestinfo_outline
|