Products of Klauke
Categories with products from Klauke
- Light & Sound ➤ Illuminants ➤ Bulbs ➤ Glow lamps and dwarf ( 1 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ Small connector ( 1 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Servicesprays ( 2 )
- Electrics ➤ Installation ➤ Terminals ➤ Shield-Kon ( 19 )
- Electronics ➤ Measurement ➤ Measuring Instruments ➤ Spirit Levels ( 3 )
- IT-Equipment ➤ Networks ➤ Junction boxes ➤ Cat6 ( 1 )
- IT-Equipment ➤ Networks ➤ Switches ➤ Miscellaneous ( 1 )
- IT-Equipment ➤ Office Equipment ➤ POS Consumables ➤ Wristbands ( 4 )
- Technology ➤ Tools ➤ Cable Pulling Systems ( 38 )
- Technology ➤ Tools ➤ Drills ( 1 )
- Technology ➤ Tools ➤ Knifes ( 14 )
- Technology ➤ Tools ➤ Miscellaneous ( 519 )
- Technology ➤ Tools ➤ Pliers ➤ Pliers Kits ( 2 )
- Technology ➤ Tools ➤ Power Tool Accessories ➤ Multi-Cutter Accessories ( 1 )
- Technology ➤ Tools ➤ Power Tools ➤ Pressure Washers ( 11 )
- Technology ➤ Tools ➤ Punches ( 138 )
- Technology ➤ Tools ➤ Safety & Workwear Equipment ➤ Workwear ( 3 )
- Technology ➤ Tools ➤ Saws ( 3 )
- Technology ➤ Tools ➤ Screwdrivers ( 25 )
- Technology ➤ Tools ➤ Tool Storage ➤ Toolboxes ( 5 )
- Technology ➤ Tools ➤ Wrenches ( 11 )
 |
 Klauke 50041835Klauke 50041835 die 50,041,835 89.8 mm, standard knockoutStandard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 978168 Mfg Part No: 50041835 |
132,17 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50041878Klauke 50041878 ball bearing nut , Single part for manual operation of sheet metal punches. 19mm Lieske Part No.: 833719 Mfg Part No: 50041878 |
105,44 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50041886KLAUKE 50041886 lag screw 19,0 x140mm 50,041,886, with ball bearings for manual operation High wear resistance. To increase service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. Lieske Part No.: 760343 Mfg Part No: 50041886 |
59,60 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042327Klauke 50042327 standard 50.8mm punches, knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 726909 Mfg Part No: 50042327 |
63,36 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50042351KLAUKE 50042351 standard template 12.7mm, PG7 PG7 Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 816874 Mfg Part No: 50042351 |
15,64 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50042459Klauke 50042459 Stamp 54.0mm Standard Knockout Standard sheet metal punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter of 9.7mm ... Lieske Part No.: 280941 Mfg Part No: 50042459 |
66,03 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50042467 50042467KLAUKE 50042467 Standard Matrize 69,9mm Stahl(ST37) 3mm Standard Blechlocher System. Geeignet für Stahlblech (ST37), Kunststoff und Aluminium. Blechlocher für manuelle und hydraulische Betätigung. Für die Verwendung des Zugbolzen 9,5mm muss das Loch ... Lieske Part No.: 492152 Mfg Part No: 50042467 |
104,45 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
KLAUKE 50042475 50042475KLAUKE 50042475 Standard Stempel 69,9mm Stahl(ST37) 3mm Standard Blechlocher System. Geeignet für Stahlblech (ST37), Kunststoff und Aluminium. Blechlocher für manuelle und hydraulische Betätigung. Für die Verwendung des Zugbolzen 9,5mm muss das Loch ... Lieske Part No.: 492153 Mfg Part No: 50042475 |
128,11 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042483Klauke 50042483 Standard stamp 47,6mm, Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 472513 Mfg Part No: 50042483 |
60,44 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042491Klauke 50042491 standard template 47,6mm, Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 548487 Mfg Part No: 50042491 |
51,78 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50042521Klauke 50042521 Standard stamp 66.7mm steel (ST37) 3mm Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 373908 Mfg Part No: 50042521 |
128,11 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50042564 50042564Klauke 50042564 Standard die 44.5mm Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 703631 Mfg Part No: 50042564 |
39,95 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50042572 50042572Klauke 50042572 Standard Stamp 44.5mm Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 703652 Mfg Part No: 50042572 |
53,46 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042580Klauke 50042580 die 50,042,580 76.2 mm, standard Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 324133 Mfg Part No: 50042580 |
123,85 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042599Klauke 50042599 stamp 50,042,599 76.2 mm, standard knockout Standard sheet metal punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter of 9.7mm ... Lieske Part No.: 119194 Mfg Part No: 50042599 |
187,11 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50045989Klauke 50045989 VA sheet metal punch die 16.2mm ISO16 Long product life. Less effort due to simple application - punching waste pieces are split and can be easily removed. Suitable for stainless steel (V2A), sheet steel (St37), plastic and aluminum. Lieske Part No.: 622620 Mfg Part No: 50045989 |
42,67 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50045997Klauke 50045997 stamp 16.2 mm, 50,045,997 Slug Splitter ISO 16 Long product life. Less effort due to simple application - punching waste pieces are split and can be easily removed. Suitable for stainless steel (V2A), sheet steel (St37), plastic and aluminum. Lieske Part No.: 228632 Mfg Part No: 50045997 |
134,34 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50046012Klauke 50046012 die 25.4mm, ISO 25 50,046,012 Slug Splitter Long product life. Less effort due to simple application - punching waste pieces are split and can be easily removed. Suitable for stainless steel (V2A), sheet steel (St37), plastic and aluminum. Lieske Part No.: 905951 Mfg Part No: 50046012 |
54,15 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50046020Klauke 50046020 Slug splitter stamp 25.4mm ISO25 V2A steel 3.5mm Long product life. Less effort due to simple application - punching waste pieces are split and can be easily removed. Suitable for stainless steel (V2A), sheet steel (St37), plastic and aluminum. Lieske Part No.: 445681 Mfg Part No: 50046020 |
200,48 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50046039Klauke 50046039 die 32.5 mm, 50,046,039 Slug Splitter ISO 32 Long product life. Less effort due to simple application - punching waste pieces are split and can be easily removed. Suitable for stainless steel (V2A), sheet steel (St37), plastic and aluminum. Lieske Part No.: 307356 Mfg Part No: 50046039 |
58,41 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50046055Klauke 50046055 stamp 32.5mm, ISO 32 50,046,055 Slug Splitter Long product life. Less effort due to simple application - punching waste pieces are split and can be easily removed. Suitable for stainless steel (V2A), sheet steel (St37), plastic and aluminum. Lieske Part No.: 979872 Mfg Part No: 50046055 |
224,33 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50046071Klauke 50046071 Slug splitter die 40.5mm ISO40 V2A steel 3.5mm Long product life. Less effort due to simple application - punching waste pieces are split and can be easily removed. Suitable for stainless steel (V2A), sheet steel (St37), plastic and aluminum. Lieske Part No.: 452047 Mfg Part No: 50046071 |
68,81 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50046080Klauke 50046080 Slug splitter stamp 40.5mm ISO40 V2A steel 3.5mm Long product life. Less effort due to simple application - punching waste pieces are split and can be easily removed. Suitable for stainless steel (V2A), sheet steel (St37), plastic and aluminum. Lieske Part No.: 636044 Mfg Part No: 50046080 |
242,25 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50046098Klauke 50046098 die 50.8 mm, 50,046,098 Slug Splitter ISO 50 Long product life. Less effort due to simple application - punching waste pieces are split and can be easily removed. Suitable for stainless steel (V2A), sheet steel (St37), plastic and aluminum. Lieske Part No.: 576640 Mfg Part No: 50046098 |
121,08 EUR
plus delivery charges
Delivery time on requestinfo_outline
|