Products of Klauke
Categories with products from Klauke
- Light & Sound ➤ Illuminants ➤ Bulbs ➤ Glow lamps and dwarf ( 1 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ Small connector ( 1 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Servicesprays ( 2 )
- Electrics ➤ Installation ➤ Terminals ➤ Shield-Kon ( 19 )
- Electronics ➤ Measurement ➤ Measuring Instruments ➤ Spirit Levels ( 3 )
- IT-Equipment ➤ Networks ➤ Junction boxes ➤ Cat6 ( 1 )
- IT-Equipment ➤ Networks ➤ Switches ➤ Miscellaneous ( 1 )
- IT-Equipment ➤ Office Equipment ➤ POS Consumables ➤ Wristbands ( 4 )
- Technology ➤ Tools ➤ Cable Pulling Systems ( 38 )
- Technology ➤ Tools ➤ Drills ( 1 )
- Technology ➤ Tools ➤ Knifes ( 14 )
- Technology ➤ Tools ➤ Miscellaneous ( 519 )
- Technology ➤ Tools ➤ Pliers ➤ Pliers Kits ( 2 )
- Technology ➤ Tools ➤ Power Tool Accessories ➤ Multi-Cutter Accessories ( 1 )
- Technology ➤ Tools ➤ Power Tools ➤ Pressure Washers ( 11 )
- Technology ➤ Tools ➤ Punches ( 138 )
- Technology ➤ Tools ➤ Safety & Workwear Equipment ➤ Workwear ( 3 )
- Technology ➤ Tools ➤ Saws ( 3 )
- Technology ➤ Tools ➤ Screwdrivers ( 25 )
- Technology ➤ Tools ➤ Tool Storage ➤ Toolboxes ( 5 )
- Technology ➤ Tools ➤ Wrenches ( 11 )
 |
 KLAUKE 4R5MSKLAUKE 4R5MS tube cable lug 25qmm M5, E-Cu galv.verz.m.SichtlochFor multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Ideal cable lug for control cabinet construction. Optimum material and pressing properties due to ... Lieske Part No.: 282217 Mfg Part No: 4R5MS |
-68% 34,13 EUR 106,61 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 4R6 4R6Klauke 4R6 cable lug 25 mm ² M6 , Tubular cable lugs standard version Note: When processing compressed round or sector-shaped conductors we recommend for precise use of tubular cable lugs and connectors to use additional cores VHR. Lieske Part No.: 664004 Mfg Part No: 4R6 |
-99% 1,25 EUR 92,63 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Klauke 4R6MSKlauke 4R6MS M6 cable lug 25 mm ², with inspection hole For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Ideal cable lug for control cabinet construction. Optimum material and pressing properties due to ... Lieske Part No.: 804537 Mfg Part No: 4R6MS |
-67% 34,09 EUR 102,83 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 4R8 4R8Klauke 4R8 cable lug 25 mm ² M8 , Tubular cable lugs standard version Note: When processing compressed round or sector-shaped conductors we recommend for precise use of tubular cable lugs and connectors to use additional cores VHR. Lieske Part No.: 557077 Mfg Part No: 4R8 |
-99% 1,16 EUR 86,64 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Klauke 4R8MSKlauke 4R8MS M8 cable lug 25 mm ², with inspection hole For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Ideal cable lug for control cabinet construction. Optimum material and pressing properties due to ... Lieske Part No.: 989318 Mfg Part No: 4R8MS |
-66% 31,58 EUR 93,83 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Klauke 50000420Klauke 50000420 lag screw 9.5 x 40 mm, 51.00042 million for manual operation High wear resistance. To increase service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length. Tolerance deviations are reserved. Lieske Part No.: 224155 Mfg Part No: 50000420 |
-5% 19,70 EUR 20,75 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50016962Klauke 50016962 steel Kabeleinziehband, 7.5m D6mm EZ Reach Sales Unit: 1 ST. Lieske Part No.: 107550 Mfg Part No: 50016962 |
30,59 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50024086 50024086Klauke 50024086 sheet metal punch ball bearing 12.7mm standard Knockout PG7 Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 1427190 Mfg Part No: 50024086 |
43,96 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50024337KLAUKE 50024337 puncher ball bearings, 14,3mm Standard Knockout Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 814909 Mfg Part No: 50024337 |
44,45 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50024434KLAUKE 50024434 standard matrix 50,024,434 70.6 mm, sheet metal punch for standard systems Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 890480 Mfg Part No: 50024434 |
111,92 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50024450Klauke 50024450 stamp 70.6mm 02445, standard knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 182416 Mfg Part No: 50024450 |
154,04 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50031708Klauke 50031708 threaded bushing 28,6 x 76 mm 03170, hydraulic actuation Accessories for standard sheet metal punch systems. For 19mm draw bolts to 28.6mm Lieske Part No.: 854848 Mfg Part No: 50031708 |
80,88 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50032488Klauke 50032488 short spacer 03248, Accessory for hydraulic punch. Short spacer bushing 22mm height. Lieske Part No.: 327044 Mfg Part No: 50032488 |
-5% 19,26 EUR 20,28 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50039865Klauke 50039865 stamp 25.4mm 03986, standard knockout ISO 25 punch for C-frame punching bracket. Fast punching in one operation - no pre-drilling required. Lieske Part No.: 116241 Mfg Part No: 50039865 |
-5% 26,73 EUR 28,16 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50040111KLAUKE 50040111 die 50,040,111 34.6 mm, Slug-Buster For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation. Lieske Part No.: 573596 Mfg Part No: 50040111 |
-5% 28,41 EUR 29,94 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50040138Klauke 50040138 Slug-Buster die 43.2mm max. steel 3mm For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation. Lieske Part No.: 424803 Mfg Part No: 50040138 |
39,95 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50040405Klauke 50040405 tension screw 19x55mm with ball bearing High wear resistance. To increase service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. Lieske Part No.: 460693 Mfg Part No: 50040405 |
33,07 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50040588 50040588Klauke 50040588 Standard Stamp 57.2mm Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 1232228 Mfg Part No: 50040588 |
75,88 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50040596 50040596Klauke 50040596 standard die 57.2mm knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 1232227 Mfg Part No: 50040596 |
67,82 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50040618KLAUKE 50040618 die 50,040,618 49.6 mm, Slug-Buster for gap-punchers For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation. Lieske Part No.: 767441 Mfg Part No: 50040618 |
50,14 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50040634KLAUKE 50040634 die 50,040,634 61.5 mm, Slug-Buster for gap-punchers For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation. Lieske Part No.: 889610 Mfg Part No: 50040634 |
70,98 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50041754 50041754Klauke 50041754 Standard stamp 74mm steel (ST37) 3mm Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 1580578 Mfg Part No: 50041754 |
160,18 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50041770 50041770Klauke 50041770 standard die 74mm steel (ST37) 3mm Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 1580577 Mfg Part No: 50041770 |
111,92 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50041800Klauke 50041800 stamp 50,041,800 89.8 mm, standard knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 540775 Mfg Part No: 50041800 |
199,78 EUR
plus delivery charges
Delivery time on requestinfo_outline
|