Installation Material from HellermannTyton

Highly abrasion-resistant and durable. Extremely resistant to high stresses. Retains its good performance properties even at high temperatures and mechanical stress. Resistant to chemicals, especially fuel, oil and sea water. Highly flexible. For the permanent protection of cables and lines in military technology, motorsports and aviation.
Sales unit: 60 meters
Lieske Part No.: 2057351

Sales unit: 1 MTR
Sales unit: 30 meters
Lieske Part No.: 172135

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. LVR is a fast-shrinking 2:1 shrink tubing for insulating and repairing cables. The low shrink temperature ensures a quick shrink result and makes the LVR ideal for fast series production.
Sales unit: 250 meters
Lieske Part No.: 667630

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. LVR is a fast-shrinking 2:1 shrink tubing for insulating and repairing cables. The low shrink temperature ensures a quick shrink result and makes the LVR ideal for fast series production.
Sales unit: 250 meters
Lieske Part No.: 326073

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. LVR is a fast-shrinking 2:1 shrink tubing for insulating and repairing cables. The low shrink temperature ensures a quick shrink result and makes the LVR ideal for fast series production.
Sales unit: 250 meters
Lieske Part No.: 851449

Type: LVR-1/4-PVC-BK
Sales unit: 250 MTR
Sales unit: 250 meters
Lieske Part No.: 511598

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. LVR is a fast-shrinking 2:1 shrink tubing for insulating and repairing cables. The low shrink temperature ensures a quick shrink result and makes the LVR ideal for fast series production.
Sales unit: 75 meters
Lieske Part No.: 991194

Type: LVR-3/4-PVC-BK
Sales unit: 100 MTR
Sales unit: 100 meters
Lieske Part No.: 435588

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. LVR is a fast-shrinking 2:1 shrink tubing for insulating and repairing cables. The low shrink temperature ensures a quick shrink result and makes the LVR ideal for fast series production.
Sales unit: 100 meters
Lieske Part No.: 1232051

Hot melt adhesive tape for assembly or repair with shrink tubing or molded parts. Optimum moisture protection. Halogen-free. For use in conjunction with heat-shrinkable molded parts and tubes. Users usually keep products with and without inner adhesive in stock. However, if shrink products with inner adhesive are only occasionally required, the storage space required and the procurement costs required are too high. HMT200A is the optimal solution: shrink tubing or molded parts with inner adhesive no longer have to be stored separately.
Lieske Part No.: 572585

Sales Unit: 1 ST.
Lieske Part No.: 961163

HIS service station offers space for 6 HIS boxes. Light and stable. Ideal storage at the workplace. Can be attached to the wall. Special scissors make it easier to cut the hoses to length. Practical ruler on the label for precisely cutting shrink tubing sections. HIS offers a complete range of 2:1 and 3:1 shrink tubing in small packages for practical storage in the HIS service station. All HIS shrink tubing is available in 3 m to 10 m lengths in practical dispenser boxes for the HIS service station. This means that the type, color and size of the hoses required can be selected quickly and easily and put together individually.
Lieske Part No.: 684112

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Good fire protection properties. Shrink tubing set in a practical case. Contains 5 sizes - from 1.5 mm to 18 mm inner diameter. A total of 220 shrink tubing sections. The ShrinkKit 321 Basic is a high-quality shrink tubing range with a large number of shrink tubing sections and covers a wide range of applications thanks to its variety.
Lieske Part No.: 133022

Type: SCHRINKIT321UNIVERSAL
Sales unit: 1 pc
Lieske Part No.: 373684

Type: SHRINKIT321-A
Sales unit: 1 pc
Lieske Part No.: 973211

Sales Unit: 1 ST.
Lieske Part No.: 914439

Sales Unit: 1 ST.
Lieske Part No.: 967419

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic internal adhesive for protection against external influences and for strain relief. Screw connector. Thermochromatic dots (green dots) as shrink indicator. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for easy handling. The LVK-C heat shrink connection set is used for universal connection of unarmored plastic cables and lines made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). It is suitable for use with press and screw connectors on aluminum and copper cables, nominal voltage 0.6/1.0 (1.2) kV.
Lieske Part No.: 1588244

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic internal adhesive for protection against external influences and for strain relief. Screw connector. Thermochromatic dots (green dots) as shrink indicator. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for easy handling. The LVK-C heat shrink connection set is used for universal connection of unarmored plastic cables and lines made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). It is suitable for use with press and screw connectors on aluminum and copper cables, nominal voltage 0.6/1.0 (1.2) kV.
Lieske Part No.: 2058486

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic internal adhesive for protection against external influences and for strain relief. Screw connector. Thermochromatic dots (green dots) as shrink indicator. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for easy handling. The LVK-C heat shrink connection set is used for universal connection of unarmored plastic cables and lines made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). It is suitable for use with press and screw connectors on aluminum and copper cables, nominal voltage 0.6/1.0 (1.2) kV.
Lieske Part No.: 2058487

Steckverbinderendgehäuse than just protection from the elements for circular connectors according to VG. The inner lip is an enhanced strain relief. Form portion 199-4-G for audio plugs has external ribs for improved grip. Type: 152-42-G-PEX-BK item: 1 ST.
Lieske Part No.: 396546

With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Fastening eyelet. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 10 pieces
Lieske Part No.: 2055170

Steckverbinderendgehäuse than just protection from the elements for circular connectors according to VG. The inner lip is an enhanced strain relief. Form portion 199-4-G for audio plugs has external ribs for improved grip. Type: 153-41-G-PEX-BK item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 423378

The molding has excellent properties as a strain relief and mechanical protection type: 154-42-G-PEX-BK item: 1 ST.
Lieske Part No.: 649091

The molding has excellent properties as a strain relief and mechanical protection type:
55-42-G-PEX-BK item:
ST.
Lieske Part No.: 982376

With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Fastening eyelet. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 2055171

With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Fastening eyelet. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 1051655

With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 2054898

With lip for strain relief for plugs. Ribs provide increased grip. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 1315009

Type: 203-1-G-PEX-BK
Sales unit: 1 pc
Lieske Part No.: 625974

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Insulation of splices according to VG standard. Bulging: sufficient space for connectors. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 1314992

Type: 206-1-G-PEX-BK
Sales unit: 1 pc
Lieske Part No.: 444825

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Insulation of splices according to VG standard. Bulging: sufficient space for connectors. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 1580441

Type: 213-1-G-PEX-BK
Sales unit: 1 pc
Sales unit: 100 pieces
Lieske Part No.: 694679

Type: 216-3-B8W
Sales unit: 50 pc
Sales unit: 10 pieces
Lieske Part No.: 450998

Type: 223-2 B8W PEX-BK 1 ST sales unit: 1 ST.
Lieske Part No.: 459819

Type: 304-1-G-PEX-BK
Sales unit: 1 pc
Sales unit: 100 pieces
Lieske Part No.: 145983

Type: 306-1-G-PEX-BK
Sales unit: 1 pc
Lieske Part No.: 876968

Einfaches Erstellen von Abzweigungen in Kabelbäumen. Mechanischer Schutz für Verzweigstellen. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Bauchig: ausreichend Platz für Verbinder. Kabelausbrüche werden aus einem harten vernetzten Polyolefin mit einem Flammschutzmittel hergestellt. Dieses ermöglicht den Einsatz im Innen- sowie im Außenbereich. Die Formteile bieten hervorragenden elektrischen und mechanischen Schutz. Die mit Innenkleber beschichteten Formteile bieten eine zuverlässige Abdichtung gegenüber Umwelteinflüssen und sind für 2,3,4, 5 und 6 adrige Kabel erhältlich. Verkaufseinheit: 1 ST.
Lieske Part No.: 498660

Type: 4

-
PES BK-G
ST sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 550509

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Thermoplastic inner adhesive for protection against external influences and for strain relief. Bulging: sufficient space for connectors. Cable breakouts are made from a hard cross-linked polyolefin with a flame retardant. This enables use both indoors and outdoors. The molded parts offer excellent electrical and mechanical protection. The molded parts coated with inner adhesive offer reliable sealing against environmental influences and are available for 2, 3, 4, 5 and 6-core cables.
Lieske Part No.: 974955

The molding has a very light and slim build and is used in the aerospace industry type: 24 - G-PEX-BK Quantity:



ST.
Sales unit: 100 pieces
Lieske Part No.: 102198

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Long cable entry for space-saving installation. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 731432

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Long cable entry for space-saving installation. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 780840

Type: 1152-4-G-PEX-BK
Sales unit: 1 pc
Sales unit: 10 pieces
Lieske Part No.: 347074

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 2055819

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 111000

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 2056046

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 963851

Type: 1156-4-G-PEX-BK
Sales unit: 1 pc
Lieske Part No.: 936517