Installation Material from HellermannTyton

Twist-proof routing of cables. Upper and lower sections connected by a tab. Easy handling including twist protection. Strain relief clamps for routing cables with a bundle diameter of up to 8.5 mm. The strain relief clamp is attached to the corresponding mounting surface using an M4 screw.
Sales unit: 500 pieces
Lieske Part No.: 438335

TY3P1 and TY8P1 (one-piece), with integrated pin for pressing in. TY8P2 (two-piece), with mushroom head design for better assembly. Expanding rivets can be used wherever quick assembly and low weight offer advantages, e.g. in series production and in control cabinet construction.
Sales unit: 10000 pieces
Lieske Part No.: 1580412

Type: G51PAA PE NA 1 RO
Sales unit: 1 pc
Lieske Part No.: 874604

Flexiform edge protection
Highly flexible edge protection for applications where cables or wires
through sharp-edged cut-outs (eg sheets) must be performed.
edge protection, polyethylene
Color: Natural
for sheet metal thickness: 1,3-2,4 Type: G51P-B-PE-NA


Quantity: 1 unit.
Lieske Part No.: 621448

Of the U-profile open toothed, highly flexible edge protection is simply applied to the panel edge and pass-to-bumper processed without sticking. With the tight shape of the rail Flexiform edge protection for cables, mechanical protection is achieved. Type: G51P-D-PE-NA Quantity: 1 ea.
Lieske Part No.: 366809

Very flexible. Easy and safe to process without glue. Offers effective and visually clean protection. Flexiform G51P made of polyethylene (PE) is the all-purpose edge protection. Flexiform G51N made of polyamide 6 (PA6) offers very good abrasion protection. Flexiform G51T made of polytetrafluoroethylene (PTFE) has excellent resistance to high temperatures and many chemicals. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punched outlets in chassis or device construction.
Lieske Part No.: 964875

Of the U-profile open toothed, highly flexible edge protection is simply applied to the panel edge and pass-to-bumper processed without sticking. With the tight shape of the rail Flexiform edge protection for cables, mechanical protection is achieved. Type: G5
PG-PE-NA Quantity:
ST.
Lieske Part No.: 780634

Of the U-profile open toothed, highly flexible edge protection is simply applied to the panel edge and pass-to-bumper processed without sticking. With the tight shape of the rail Flexiform edge protection for cables, mechanical protection is achieved. Type: G5
PH-PE-NA Quantity:
ST.
Lieske Part No.: 968116

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 359692

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 733158

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 556303

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 443739

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 148313

Type: G51NF PA6 NA 1 RO
Sales unit: 1 pc
Lieske Part No.: 957947

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Sales unit: 10 pieces
Lieske Part No.: 1580405

Type: G51TA PTFE NA 1 RO
Sales unit: 1 pc
Lieske Part No.: 951930

Very flexible. Easy and safe to process without adhesive. Excellent protection at high temperatures. Resistant to a wide range of chemicals. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 511604

Type: G51TC PTFE NA 1 RO
Sales unit: 1 pc
Lieske Part No.: 734329

Of the U-profile open toothed, highly flexible edge protection is simply applied to the panel edge and pass-on-shock processed without sticking. With the tight shape of the rail Flexiform edge protection for cables, mechanical protection is achieved. Type: G5
TG-PTFE-NA Quantity:
ST.
Lieske Part No.: 108000

HIS Service Station offers space for 5 HIS boxes. Light and stable. Practical storage at the workplace. Can be attached to the wall. Special scissors make it easier to cut the hoses to length. HIS offers a complete range of 2:1 and 3:1 shrink tubing in small packages for practical storage in the HIS Service Station. All HIS shrink tubing is available in 3 m to 10 m lengths in practical dispenser boxes for the HIS Service Station. This means that the type, color and size of the hoses required can be selected quickly and easily and put together individually.
Lieske Part No.: 916166

HIS-Service-Station bietet Platz für 6 HIS-Boxen. leicht und stabil. Ideale Aufbewahrung am Arbeitsplatz. Befestigung an der Wand möglich. Spezialschere erleichtert das Ablängen der Schläuche. Praktisches Lineal auf dem Label für das exakte Ablängen von Schrumpfschlauchabschnitten. HIS bietet ein vollständiges Sortiment an 2:1 und 3:1 Schrumpfschläuchen in Kleinstverpackungen zur praktischen Aufbewahrung in der HIS-Service-Station. Alle HIS-Schrumpfschläuche werden in 3 m bis 10 m Längen in praktischen Spender Kartons für die HIS-Service-Station angeboten. So können Typ, Farbe und Größe der benötigten Schläuche schnell und einfach ausgewählt und individuell zusammengestellt werden. Verkaufseinheit: 1 ST.
Lieske Part No.: 157050

Special packs HIS
Material: Polyolefin (PEX), cross-linked
Color: various
Change after shrinkage: - 5% max.
Operating temperature: -55 ° C to +135 ° C
Shrink temperature: From +120 ° C
Insulation class: B (VDE 0530)
Dielectric strength to IEC 684 P2 25kV/mm
Flammability: self-extinguishing

These radiation-crosslinked polyolefin shrink tubing are also 5 m
and 10 m rolls available in cardboard boxes. The product com-
st six different colors and diameter of 1.2 to 25.4 mm.
The thin, flexible tubes are self-extinguishing.

Applications
HIS Universal shrink reliably isolate and protect
against corrosion and mechanical influences. The handy packaging
for the small and medium demand makes the application site
particularly easy. In sturdy HIS rack made of metal with chained
Special scissors are different sizes and colors at your fingertips.
His pack black
Color: black
Degree n completely empty. Shrinkage Ø D max. / W. nom: 0.6 / 0.4
Size: 3/162,6 cm ( 64 inch )

Type: HIS-3/64-PEX-BK
Quantity: 1 unit.
Lieske Part No.: 424465

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Dispenser box enables easy handling as well as dust-free and tidy storage. 10 sizes available - from 1.2 mm to 25.4 mm inner diameter. Blue, red, black, transparent and green-yellow. Suitable for the HIS service station. HIS-Pack is a thin-walled, flexible shrink tubing with a shrink ratio of 2:1. The small rolls are ideal for smaller requirements in electrical engineering. HIS-Pack is available in 10 sizes from 1.2 mm to 25.4 mm in the colors blue, red, black, transparent and green-yellow in a dispenser box.
Lieske Part No.: 246634

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Dispenser box enables easy handling as well as dust-free and tidy storage. 10 sizes available - from 1.2 mm to 25.4 mm inner diameter. Blue, red, black, transparent and green-yellow. Suitable for the HIS service station. HIS-Pack is a thin-walled, flexible shrink tubing with a shrink ratio of 2:1. The small rolls are ideal for smaller requirements in electrical engineering. HIS-Pack is available in 10 sizes from 1.2 mm to 25.4 mm in the colors blue, red, black, transparent and green-yellow in a dispenser box.
Lieske Part No.: 596659

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Dispenser box enables easy handling as well as dust-free and tidy storage. 10 sizes available - from 1.2 mm to 25.4 mm inner diameter. Blue, red, black, transparent and green-yellow. Suitable for the HIS service station. HIS-Pack is a thin-walled, flexible shrink tubing with a shrink ratio of 2:1. The small rolls are ideal for smaller requirements in electrical engineering. HIS-Pack is available in 10 sizes from 1.2 mm to 25.4 mm in the colors blue, red, black, transparent and green-yellow in a dispenser box.
Lieske Part No.: 345292

Special packs HIS
Material: Polyolefin (PEX), irradiated
color: various
Change after shrinkage: - 5% max.
Operating temperature: -55 ° C to +135 ° C
Shrink temperature: From +120 ° C
Insulation class: B (VDE 0530)
Dielectric strength to IEC 684 P2 25kV/mm
Flammability: self-extinguishing

These radiation-crosslinked polyolefin shrink tubing are also 5 m
and 10 m rolls available in cardboard boxes. The product com-

st six different colors and diameter of 1.2 to 25.4 mm.
, the thin, flexible tubes are self-extinguishing.

Applications
HIS Universal shrink reliably isolate and protect
against corrosion and mechanical influences. The handy packaging
for the small and medium demand makes the application site
particularly easy.In sturdy HIS rack with metal chained
Special scissors different sizes and colors are at hand.
His pack black
Color: black
Degree n completely empty. Shrinkage Ø D max. / W. nom: 0.6 / 0.5
Size: 1/40,6 cm ( 16 inch )

Type: HIS-1/16-PEX-BK
Quantity: 1 unit.
Lieske Part No.: 319908

Special packs HIS
Material: Polyolefin (PEX), cross-linked
Color: various
Change after shrinkage: - 5% max.
Operating temperature: -55 ° C to +135 ° C
Shrink temperature: From +120 ° C
Insulation class: B (VDE 0530)
Dielectric strength to IEC 684 P2 25kV/mm
Flammability: self-extinguishing

These radiation-crosslinked polyolefin shrink tubing are also 5 m
and 10 m rolls available in cardboard boxes. The product com-
st six different colors and diameter of 1.2 to 25.4 mm.
The thin, flexible tubes are self-extinguishing.

Applications
HIS Universal shrink reliably isolate and protect
against corrosion and mechanical influences. The handy packaging
for the small and medium demand makes the application site
particularly easy. In sturdy HIS rack made of metal with chained
Special scissors are different sizes and colors at your fingertips.
HIS - 1/16
Supplied Ø D min 1.6
Roll length 10 m
Color: red
Degree n completely empty. Shrinkage Ø D max./ W. nom: 0.6 / 0.5
Size: 1/40,6 cm ( 16 inch ) Type: HIS-1/16-PEX-RD


Quantity: 1 unit.
Lieske Part No.: 265354

Special packs HIS Material: Polyolefin (PEX), irradiated color: various change after shrinkage: - 5% max. Operating temperature: -55 ° C to +
35 ° C Shrinking temperature: from +
2 ° C Insulation class: B (VDE 53) Dielectric strength to IEC 684 P2 25kV/mm Flammability: self-extinguishing These radiation-crosslinked polyolefin shrink tubing than 5 m and
available m rolls in cardboard boxes. The product com-st six different colors and diameters of
From 2 to 25.4 mm. The thin, flexible tubes are self-extinguishing. Universal applications HIS shrink reliably isolate and protect against corrosion and mechanical influences. The handy packaging for small and medium demand makes the application very easy to spot. In sturdy HIS rack made of metal with special scissors chained various sizes and colors are at hand. His pack transparent color: transparent degree n completely empty. Shrinkage Ø D max. / W. nom: 6 /, 5 Size:
/
15,2 cm ( 6 inch ) Type: HIS-
/
6-PEX-CL item:
ST.
Lieske Part No.: 871412

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Dispenser box enables easy handling as well as dust-free and tidy storage. 10 sizes available - from 1.2 mm to 25.4 mm inner diameter. Blue, red, black, transparent and green-yellow. Suitable for the HIS service station. HIS-Pack is a thin-walled, flexible shrink tubing with a shrink ratio of 2:1. The small rolls are ideal for smaller requirements in electrical engineering. HIS-Pack is available in 10 sizes from 1.2 mm to 25.4 mm in the colors blue, red, black, transparent and green-yellow in a dispenser box.
Lieske Part No.: 460972

Special packs HIS
Material: Polyolefin (PEX), cross-linked
Color: various
Change after shrinkage: - 5% max.
Operating temperature: -55 ° C to +135 ° C
Shrink temperature: From +120 ° C
Insulation class: B (VDE 0530)
Dielectric strength to IEC 684 P2 25kV/mm
Flammability: self-extinguishing

These radiation-crosslinked polyolefin shrink tubing are also 5 m
and 10 m rolls available in cardboard boxes. The product com-
st six different colors and diameter of 1.2 to 25.4 mm.
The thin, flexible tubes are self-extinguishing.

Applications
HIS Universal shrink reliably isolate and protect
against corrosion and mechanical influences. The handy packaging
for the small and medium demand makes the application site
particularly easy. In sturdy HIS rack made of metal with chained
Special scissors are different sizes and colors at your fingertips.
His pack black
Color: black
Degree n completely empty. Shrinkage Ø D max. / W. nom: 1.2 / 0.5
Size: 3/81,3 cm ( 32 inch )

Type: HIS-3/32-PEX-BK
Quantity: 1 unit.
Lieske Part No.: 471191

Special packs HIS Material: Polyolefin (PEX), irradiated color: various change after shrinkage: - 5% max. Operating temperature: -55 ° C to +
35 ° C Shrinking temperature: from +
2 ° C Insulation class: B (VDE 53) Dielectric strength to IEC 684 P2 25kV/mm Flammability: self-extinguishing These radiation-crosslinked polyolefin shrink tubing than 5 m and
available m rolls in cardboard boxes.The product com-st six different colors and diameters from
2 to 25.4 mm. The thin, flexible tubes are self-extinguishing. Universal applications HIS shrink reliably isolate and protect against corrosion and mechanical influences. The handy packaging for small and medium demand makes the application very easy to spot. In sturdy HIS rack made of metal with special scissors chained various sizes and colors are at hand.HIS - 3/32 Supplied Ø D min 2.4 Roll length
M Color: Red Dimension n completely empty. Shrinkage Ø D max. / W. nom:
, 2 /, 5 Size: 3/81,3 cm ( 32 inch ) Type: HIS-3/32-PEX-RD item:
ST.
Lieske Part No.: 838840

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Dispenser box enables easy handling as well as dust-free and tidy storage. 10 sizes available - from 1.2 mm to 25.4 mm inner diameter. Blue, red, black, transparent and green-yellow. Suitable for the HIS service station. HIS-Pack is a thin-walled, flexible shrink tubing with a shrink ratio of 2:1. The small rolls are ideal for smaller requirements in electrical engineering. HIS-Pack is available in 10 sizes from 1.2 mm to 25.4 mm in the colors blue, red, black, transparent and green-yellow in a dispenser box.
Lieske Part No.: 761927

Special packs HIS Material: Polyolefin (PEX), irradiated color: various change after shrinkage: - 5% max. Operating temperature: -55 ° C to +
35 ° C Shrinking temperature: from +
2 ° C Insulation class: B (VDE 53) Dielectric strength to IEC 684 P2 25kV/mm Flammability: self-extinguishing These radiation-crosslinked polyolefin shrink tubing than 5 m and
available m rolls in cardboard boxes. The product com-st six different colors and diameters of
From 2 to 25.4 mm. The thin, flexible tubes are self-extinguishing. Universal applications HIS shrink reliably isolate and protect against corrosion and mechanical influences. The handy packaging for small and medium demand makes the application very easy to spot. In sturdy HIS rack made of metal with special scissors chained various sizes and colors are at hand. HIS - 3/32 Supplied Ø D min 2.4 Length of roll
M Color: Blue Dimension n completely empty. Shrinkage Ø D max. / W. nom:
, 2 /, 5 Size: 3/81,3 cm ( 32 inch ) Type: HIS-3/32-PEX-BU item:
ST.
Lieske Part No.: 914654

Special packs HIS Material: Polyolefin (PEX), irradiated color: various change after shrinkage: - 5% max. Operating temperature: -55 ° C to +
35 ° C Shrinking temperature: from +
2 ° C Insulation class: B (VDE 53) Dielectric strength to IEC 684 P2 25kV/mm Flammability: self-extinguishing These radiation-crosslinked polyolefin shrink tubing than 5 m and
available m rolls in cardboard boxes. The product com-st six different colors and diameters of
From 2 to 25.4 mm. The thin, flexible tubes are self-extinguishing. Universal applications HIS shrink reliably isolate and protect against corrosion and mechanical influences. The handy packaging for small and medium demand makes the application very easy to spot. In sturdy HIS rack made of metal with special scissors chained various sizes and colors are at hand. His pack black color: black Dimension n completely empty. Shrinkage Ø D max. / W. nom:
, 6 /, 5 Size:
/ 20,3 cm ( 8 inch ) Type: HIS-
/ 8-PEX-BK Quantity:
ST.
Lieske Part No.: 990050

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Dispenser box enables easy handling as well as dust-free and tidy storage. 10 sizes available - from 1.2 mm to 25.4 mm inner diameter. Blue, red, black, transparent and green-yellow. Suitable for the HIS service station. HIS-Pack is a thin-walled, flexible shrink tubing with a shrink ratio of 2:1. The small rolls are ideal for smaller requirements in electrical engineering. HIS-Pack is available in 10 sizes from 1.2 mm to 25.4 mm in the colors blue, red, black, transparent and green-yellow in a dispenser box.
Sales unit: 40 pieces
Lieske Part No.: 758240

Special packs HIS Material: Polyolefin (PEX), irradiated color: various change after shrinkage: - 5% max. Operating temperature: -55 ° C to +
35 ° C Shrinking temperature: from +
2 ° C Insulation class: B (VDE 53) Dielectric strength to IEC 684 P2 25kV/mm Flammability: self-extinguishing These radiation-crosslinked polyolefin shrink tubing than 5 m and
available m rolls in cardboard boxes. The product com-st six different colors and diameters of
From 2 to 25.4 mm. The thin, flexible tubes are self-extinguishing. Universal applications HIS shrink reliably isolate and protect against corrosion and mechanical influences. The handy packaging for small and medium demand makes the application very easy to spot. In sturdy HIS rack made of metal with special scissors chained various sizes and colors are at hand. HIS -
/ 8 Supplied Ø D min 3.2 Length of roll
M Color: Red Dimension n completely empty. Shrinkage Ø D max. / W. nom:
, 6 /, 5 Size:
/ 20,3 cm ( 8 inch ) Type: HIS-
/ 8-PEX-RD item:
ST.
Lieske Part No.: 702618

Special packs HIS
Material: Polyolefin (PEX), irradiated
color: various
change after shrinkage: -. 5% Max
Operating Temperature: -55 ° C to +135 ° C
Shrinking temperature: From +120 ° C
Insulation class: B (VDE 0530)
Dielectric strength to IEC 684 P2 25kV/mm
Flammability: self-extinguishing thesis radiation cross-linked polyolefin shrink tubing are some 5 m and 10 m rolls in cardboard boxes available. The product com- st six different colors and diameter of 1.2 to 25.4 mm. , the thin, flexible tubes are self-extinguishing.






Applications
Universal HIS shrink Reliably isolate and protect
against corrosion and mechanical influences. handy The packaging
for the small and medium demand makes the application site
more easily. sturdy Add HIS rack with metal chained
Special scissors different sizes and colors are at hand.
transparent His Pack
Color: transparent
Degree n completely empty. Shrinkage Ø D max. / W. nom: 1.6 / 0.5
Size: 1/20,3 cm ( 8 inch ) Type: HIS-1/8-PEX-CL


Quantity: 1 unit.
Lieske Part No.: 187171

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Dispenser box enables easy handling as well as dust-free and tidy storage. 10 sizes available - from 1.2 mm to 25.4 mm inner diameter. Blue, red, black, transparent and green-yellow. Suitable for the HIS service station. HIS-Pack is a thin-walled, flexible shrink tubing with a shrink ratio of 2:1. The small rolls are ideal for smaller requirements in electrical engineering. HIS-Pack is available in 10 sizes from 1.2 mm to 25.4 mm in the colors blue, red, black, transparent and green-yellow in a dispenser box.
Sales unit: 40 pieces
Lieske Part No.: 943896

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Dispenser box enables easy handling as well as dust-free and tidy storage. 10 sizes available - from 1.2 mm to 25.4 mm inner diameter. Blue, red, black, transparent and green-yellow. Suitable for the HIS service station. HIS-Pack is a thin-walled, flexible shrink tubing with a shrink ratio of 2:1. The small rolls are ideal for smaller requirements in electrical engineering. HIS-Pack is available in 10 sizes from 1.2 mm to 25.4 mm in the colors blue, red, black, transparent and green-yellow in a dispenser box.
Lieske Part No.: 833668

Special packs HIS Material: Polyolefin (PEX), irradiated color: various change after shrinkage: - 5% max. Operating temperature: -55 ° C to +
35 ° C Shrinking temperature: from +
2 ° C Insulation class: B (VDE 53) Dielectric strength to IEC 684 P2 25kV/mm Flammability: self-extinguishing These radiation-crosslinked polyolefin shrink tubing than 5 m and
available m rolls in cardboard boxes. The product com-st six different colors and diameters of
From 2 to 25.4 mm. The thin, flexible tubes are self-extinguishing. Universal applications HIS shrink reliably isolate and protect against corrosion and mechanical influences. The handy packaging for small and medium demand makes the application very easy to spot. In sturdy HIS rack made of metal with special scissors chained various sizes and colors are at hand. His pack green / yellow color: green / yellow degree n completely empty. Shrinkage Ø D max. / W. nom:
, 6 /, 5 Size:
/ 20,3 cm ( 8 inch ) Type: HIS
/ 8 PEX GNYE item:
ST.
Lieske Part No.: 894621

Special packs HIS
Material: Polyolefin (PEX), cross-linked
Color: various
Change after shrinkage: - 5% max.
Operating temperature: -55 ° C to +135 ° C
Shrink temperature: From +120 ° C
Insulation class: B (VDE 0530)
Dielectric strength to IEC 684 P2 25kV/mm
Flammability: self-extinguishing

These radiation-crosslinked polyolefin shrink tubing are also 5 m
and 10 m rolls available in cardboard boxes. The product com-
st six different colors and diameter of 1.2 to 25.4 mm.
The thin, flexible tubes are self-extinguishing.

Applications
HIS Universal shrink reliably isolate and protect
against corrosion and mechanical influences. The handy packaging
for the small and medium demand makes the application site
particularly easy. In sturdy HIS rack made of metal with chained
Special scissors are different sizes and colors at your fingertips.
His pack black
Color: black
Degree n completely empty. Shrinkage Ø D max. / W. nom: 2.4 / 0.5
Size: 3/40,6 cm ( 16 inch )

Type: HIS-3/16-PEX-BK
Quantity: 1 unit.
Lieske Part No.: 253817

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Dispenser box enables easy handling as well as dust-free and tidy storage. 10 sizes available - from 1.2 mm to 25.4 mm inner diameter. Blue, red, black, transparent and green-yellow. Suitable for the HIS service station. HIS-Pack is a thin-walled, flexible shrink tubing with a shrink ratio of 2:1. The small rolls are ideal for smaller requirements in electrical engineering. HIS-Pack is available in 10 sizes from 1.2 mm to 25.4 mm in the colors blue, red, black, transparent and green-yellow in a dispenser box.
Sales unit: 40 pieces
Lieske Part No.: 2054021

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Dispenser box enables easy handling as well as dust-free and tidy storage. 10 sizes available - from 1.2 mm to 25.4 mm inner diameter. Blue, red, black, transparent and green-yellow. Suitable for the HIS service station. HIS-Pack is a thin-walled, flexible shrink tubing with a shrink ratio of 2:1. The small rolls are ideal for smaller requirements in electrical engineering. HIS-Pack is available in 10 sizes from 1.2 mm to 25.4 mm in the colors blue, red, black, transparent and green-yellow in a dispenser box.
Lieske Part No.: 467487

Special packs HIS Material: Polyolefin (PEX), irradiated color: various change after shrinkage: - 5% max. Operating temperature: -55 ° C to +
35 ° C Shrinking temperature: from +
2 ° C Insulation class: B (VDE 53) Dielectric strength to IEC 684 P2 25kV/mm Flammability: self-extinguishing These radiation-crosslinked polyolefin shrink tubing than 5 m and
available m rolls in cardboard boxes. The product com-st six different colors and diameters of
From 2 to 25.4 mm. The thin, flexible tubes are self-extinguishing. Universal applications HIS shrink reliably isolate and protect against corrosion and mechanical influences. The handy packaging for small and medium demand makes the application very easy to spot. In sturdy HIS rack made of metal with special scissors chained various sizes and colors are at hand. His pack transparent color: transparent degree n completely empty. Shrinkage Ø D max./ W. nom: 2.4 / .5 Size: 3 /
15,2 cm ( 6 inch ) Type: HIS-3 /
6-PEX-CL item:
ST.
Lieske Part No.: 885551

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Dispenser box enables easy handling as well as dust-free and tidy storage. 10 sizes available - from 1.2 mm to 25.4 mm inner diameter. Blue, red, black, transparent and green-yellow. Suitable for the HIS service station. HIS-Pack is a thin-walled, flexible shrink tubing with a shrink ratio of 2:1. The small rolls are ideal for smaller requirements in electrical engineering. HIS-Pack is available in 10 sizes from 1.2 mm to 25.4 mm in the colors blue, red, black, transparent and green-yellow in a dispenser box.
Sales unit: 40 pieces
Lieske Part No.: 2056813

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Dispenser box enables easy handling as well as dust-free and tidy storage. 10 sizes available - from 1.2 mm to 25.4 mm inner diameter. Blue, red, black, transparent and green-yellow. Suitable for the HIS service station. HIS-Pack is a thin-walled, flexible shrink tubing with a shrink ratio of 2:1. The small rolls are ideal for smaller requirements in electrical engineering. HIS-Pack is available in 10 sizes from 1.2 mm to 25.4 mm in the colors blue, red, black, transparent and green-yellow in a dispenser box.
Lieske Part No.: 167548

Special packs HIS Material: Polyolefin (PEX), irradiated color: various change after shrinkage: - 5% max. Operating temperature: -55 ° C to +
35 ° C Shrinking temperature: from +
2 ° C Insulation class: B (VDE 53) Dielectric strength to IEC 684 P2 25kV/mm Flammability: self-extinguishing These radiation-crosslinked polyolefin shrink tubing are also 5m and
available m rolls in cardboard boxes. The product com-st six different colors and diameters of
From 2 to 25.4 mm. The thin, flexible tubes are self-extinguishing. Universal applications HIS shrink reliably isolate and protect against corrosion and mechanical influences. The handy packaging for small and medium demand makes the application very easy to spot. In sturdy HIS rack made of metal with special scissors chained various sizes and colors are at hand. His pack green / yellow color: yellow / green dimension n completely empty. Shrinkage Ø D max./ W. nom: 2.4 / .5 Size: 3 /
15,2 cm ( 6 inch ) Type: HIS-3 /
6-PEX GNYE item:
ST.
Lieske Part No.: 951737

Special packs HIS Material: Polyolefin (PEX), irradiated color: various change after shrinkage: - 5% max. Operating temperature: -55 ° C to +
35 ° C Shrinking temperature: from +
2 ° C Insulation class: B (VDE 53) Dielectric strength to IEC 684 P2 25kV/mm Flammability: self-extinguishing These radiation-crosslinked polyolefin shrink tubing than 5 m and
available m rolls in cardboard boxes. The product com-st six different colors and diameters of
From 2 to 25.4 mm. The thin, flexible tubes are self-extinguishing. Universal applications HIS shrink reliably isolate and protect against corrosion and mechanical influences. The handy packaging for small and medium demand makes the application very easy to spot. In sturdy HIS rack made of metal with special scissors chained various sizes and colors are at hand. His pack black color: black Dimension n completely empty. Shrinkage Ø D max./ W. nom: 3.2 /, 7 size: 16,3 cm ( 6,4 inch ) Type: HIS
/ 4-PEX-BK Quantity:
ST.
Lieske Part No.: 971012

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Dispenser box enables easy handling as well as dust-free and tidy storage. 10 sizes available - from 1.2 mm to 25.4 mm inner diameter. Blue, red, black, transparent and green-yellow. Suitable for the HIS service station. HIS-Pack is a thin-walled, flexible shrink tubing with a shrink ratio of 2:1. The small rolls are ideal for smaller requirements in electrical engineering. HIS-Pack is available in 10 sizes from 1.2 mm to 25.4 mm in the colors blue, red, black, transparent and green-yellow in a dispenser box.
Sales unit: 40 pieces
Lieske Part No.: 758432

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Dispenser box enables easy handling as well as dust-free and tidy storage. 10 sizes available - from 1.2 mm to 25.4 mm inner diameter. Blue, red, black, transparent and green-yellow. Suitable for the HIS service station. HIS-Pack is a thin-walled, flexible shrink tubing with a shrink ratio of 2:1. The small rolls are ideal for smaller requirements in electrical engineering. HIS-Pack is available in 10 sizes from 1.2 mm to 25.4 mm in the colors blue, red, black, transparent and green-yellow in a dispenser box.
Lieske Part No.: 997700