Installation Material from HellermannTyton

Type: RO201-1401-WH 1401 WH,CL 1 PA
Sales unit: 1 pc
Lieske Part No.: 996678

The small, practical, yellow label dispenser is filled with freely inscribable protective film labels. Just write the text you want into the window of the dispenser, placed label with the described area on the cable and wrap it with the protective film. So the label from moisture, mechanical abrasion and other influences is protected. The labels are available in 3 sizes for cable diameters from 4 to 18mm. Type: RO203-1401-WH WH 1401, CL 1 PA
Sales Unit: 1 ST.
Lieske Part No.: 938561

Sales Unit: 1 ST.
Lieske Part No.: 593392

Sales Unit: 1 ST.
Lieske Part No.: 299431

Practical RiteOn label dispenser for manual labeling. Ideal for repair and maintenance work with small volumes. Easy labeling and processing of the labels. Excellent protection against moisture and mechanical abrasion thanks to the protective laminate. T82 marking pen for professional and permanent hand labeling. Write on the labels in the dispenser's viewing window and then apply. Refill packs available (REF). The refill packs for the RiteOn dispensers are available in 3 sizes and 6 different colors. Existing dispensers can be refilled quickly and easily.
Lieske Part No.: 840252

Practical RiteOn label dispenser for manual labeling. Ideal for repair and maintenance work with small volumes. Easy labeling and processing of the labels. Excellent protection against moisture and mechanical abrasion thanks to the protective laminate. T82 marking pen for professional and permanent hand labeling. Write on the labels in the dispenser's viewing window and then apply. Refill packs available (REF). The refill packs for the RiteOn dispensers are available in 3 sizes and 6 different colors. Existing dispensers can be refilled quickly and easily.
Lieske Part No.: 1564590

Sales Unit: 1 ST.
Lieske Part No.: 914461

Type: RO202REF-1401-YE
Sales unit: 1 pc
Lieske Part No.: 130673

Practical RiteOn label dispenser for manual labeling. Ideal for repair and maintenance work with small volumes. Easy labeling and processing of the labels. Excellent protection against moisture and mechanical abrasion thanks to the protective laminate. T82 marking pen for professional and permanent hand labeling. Write on the labels in the dispenser's viewing window and then apply. Refill packs available (REF). The refill packs for the RiteOn dispensers are available in 3 sizes and 6 different colors. Existing dispensers can be refilled quickly and easily.
Lieske Part No.: 1259575

Practical RiteOn label dispenser for manual labeling. Ideal for repair and maintenance work with small volumes. Easy labeling and processing of the labels. Excellent protection against moisture and mechanical abrasion thanks to the protective laminate. T82 marking pen for professional and permanent hand labeling. Write on the labels in the dispenser's viewing window and then apply. Refill packs available (REF). The refill packs for the RiteOn dispensers are available in 3 sizes and 6 different colors. Existing dispensers can be refilled quickly and easily.
Lieske Part No.: 1259952

Type: RO203REF-1401-WH 1401 WH,CL 1 PA
Sales unit: 1 pc
Lieske Part No.: 565474

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 176 meters
Lieske Part No.: 1346801

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 176 meters
Lieske Part No.: 1131364

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 110 meters
Lieske Part No.: 1346794

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 110 meters
Lieske Part No.: 2058380

Schrumpfrate 3:1. Verfügbar in den Farben Schwarz, Blau, Rot, Weiß und Gelb. Sonderfarben auf Anfrage. Kabeldurchmesser 1 mm bis 39 mm. Gute mechanische Festigkeit und gute Beständigkeit gegen organische Lösungsmittel und Chemikalien. Hochflexibel. Lieferung in praktischen, wiederverschließbaren Kartons. TCGT ist ein 3:1 Schrumpfschlauch im Endlosformat, welcher beidseitig bedruckt werden kann. Dieser Schrumpfschlauch eignet sich hervorragend zur Kennzeichnung von Kabeln und Leitungen im Schaltschrankbau, in der Automatisationstechnik, Medizintechnik und in der Kabelkonfektion. Er wird auf handlichen Rollen geliefert. Diese passen optimal in die von HellermannTyton angebotenen Drucksysteme. Werden Schlauchzuschnitte benötigt, ist dies problemlos mit dem optionalen Schneide- oder Perforationsmesser möglich. Verkaufseinheit: 110 MTR
Sales unit: 110 meters
Lieske Part No.: 687530

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 110 pieces
Lieske Part No.: 1131351

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 72 meters
Lieske Part No.: 2058381

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 54 meters
Lieske Part No.: 2058382

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 54 meters
Lieske Part No.: 2058383

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1131365

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 2058384

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 2058385

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346793

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346792

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346791

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346790

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 10 meters
Lieske Part No.: 1131123

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 10 meters
Lieske Part No.: 2058386

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 176 meters
Lieske Part No.: 1346789

TULT - 3: 1 UL listed heat shrinkable markers, Article number: 553-40351
TULT - 3: 1 UL listed heat shrinkable markers
Features:
Shrink ratio 3: 1
Available in the colors black, blue, red, white and yellow
cable diameter 39 mm to 1 mm
Good mechanical strength and good resistance to organic solvents and chemicals
Highly flexible
Meets UL224 VW-1 and CSA requirements
Delivery in practical, reclosable carton
Simple label design with the TagPrint Pro software
application
TULT is a UL listed 3: 1 ratio heat shrinkable, which can be printed on both sides. This shrink tubing is ideal for the identification of cables and wires in the switch cabinet, military equipment applications in the Automation technology, medical technology, the automotive industry and in cable assembly.
Printer: TrakMark DS, TT4000 + and TT430
Ribbons: TTRC +, TTDTHOUT, TTRW, TT822OUT8
accessories for TrakMark DS and TT4000 +: perforation (P4000) and cutter (S4000)
Accessories for the TT430: perforation (P430) and cutter (S430)
software: TagPrint Pro
Sales unit: 176 meters
Lieske Part No.: 705813

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 110 meters
Lieske Part No.: 1131122

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 110 meters
Lieske Part No.: 1131121

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 72 meters
Lieske Part No.: 1344612

TULT - 3: 1 UL listed heat shrinkable markers, Article number: 553-40951
TULT - 3: 1 UL listed heat shrinkable markers
Features:
Shrink ratio 3: 1
Available in the colors black, blue, red, white and yellow
cable diameter 39 mm to 1 mm
Good mechanical strength and good resistance to organic solvents and chemicals
Highly flexible
Meets UL224 VW-1 and CSA requirements
Delivery in practical, reclosable carton
Simple label design with the TagPrint Pro software
application
TULT is a UL listed 3: 1 ratio heat shrinkable, which can be printed on both sides. This shrink tubing is ideal for the identification of cables and wires in the switch cabinet, military equipment applications in the Automation technology, medical technology, the automotive industry and in cable assembly.
Printer: TrakMark DS, TT4000 + and TT430
Ribbons: TTRC +, TTDTHOUT, TTRW, TT822OUT8
accessories for TrakMark DS and TT4000 +: perforation (P4000) and cutter (S4000)
Accessories for the TT430: perforation (P430) and cutter (S430)
software: TagPrint Pro
Sales unit: 72 meters
Lieske Part No.: 705900

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 54 meters
Lieske Part No.: 1131120

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 26 meters
Lieske Part No.: 1344611

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 26 meters
Lieske Part No.: 541968

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 26 meters
Lieske Part No.: 622196

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 10 meters
Lieske Part No.: 1131119

Shrink ratio 2:1. Halogen-free. Low smoke spread, density and toxicity. High oxygen index. 50 mm, 25 mm and 16 mm heat shrink tubing sections. Available in yellow or white. Special lengths and other colors on request. Cable diameter 1.2 mm to 38.1 mm. Supplied in practical, resealable boxes. TLFX DS is a 2:1 heat shrink tubing specially developed for the rail industry, which is supplied in a practical ladder format. This is particularly suitable for marking cables in public buildings (e.g. airports, hospitals) and means of transport (e.g. rail vehicles, ships, aircraft) as well as tunnels. The special material has low smoke spread, density and toxicity. The prefabricated format not only allows printing on both sides, but also easy and quick removal of any marker. Thanks to the special surface treatment, excellent printing results are always achieved with the HellermannTyton systems.
Lieske Part No.: 1331566

Sales Unit: 1 ST.
Lieske Part No.: 873942

Sales Unit: 1 ST.
Lieske Part No.: 873940

Sales Unit: 1 ST.
Lieske Part No.: 873423

Sales Unit: 1 ST.
Lieske Part No.: 613618

Shrink ratio 3:1. 50 mm and 25 mm shrink tubing sections, 16 mm and special lengths on request. Available in white or yellow. Good mechanical strength and resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT DS is a UL-listed 3:1 shrink tubing that is already supplied in a practical conductor format. The prefabricated format not only allows printing on both sides, but also allows any marker to be removed quickly and easily. The shrink tubing is made of a polyolefin compound and therefore has good mechanical strength and resistance to organic solvents and chemicals. It is ideal for marking cables and wires in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. Thanks to the special surface treatment, excellent printing results are always achieved with the coordinated system from HellermannTyton.
Lieske Part No.: 989496

Sales Unit: 1 ST.
Lieske Part No.: 762545

Type: TULT9-3DS-1x50WH item: 1 ST.
Lieske Part No.: 414489

Type: TULT9-3DS-1x50YE item: 1 ST.
Lieske Part No.: 689651

Sales Unit: 1 ST.
Lieske Part No.: 762546