Hager VU36NC UP distributor Volta IP30 3x12PLE DIN43870
|
192,19 EUR |
|||||||||||
|
( 228,71 EUR incl. VAT ) ≈ £160.86 | ≈ $211.22 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline | |||||||||||
| In Stock: >100 pieces | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 462385 | ||||||||||
| Mfg Part No: | VU36NC | ||||||||||
| UPC/EAN: | 3250616614420 | ||||||||||
| Weight: | 4.3 kg | ||||||||||
| Type: | VU36NC | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Hager VU36NC:
Applications
The distributor is intended for electrical installations in residential buildings and commercial rooms where a clear and secure distribution of electrical lines is required. It complies with standards DIN VDE 60670-24 and DIN 43871 and is approved for residential buildings according to DIN 18015. The installation dimensions are 615 mm in height and 314 mm in width, with an installation depth of 89 mm. The overall dimensions of the housing are 630.5 mm (height), 348 mm (width), and 94.5 mm (depth), with an internal depth of 91.5 mm.
Functions and equipment in detail
The distributor is equipped with a cable entry slider that enables secure and tight cable entry. A standard cable strain relief ensures proper cable routing. Installation is carried out using mounting brackets made of galvanized sheet steel, ensuring stable anchoring in masonry. The device carrier made of sheet steel allows mounting of individual, isolated DIN rails. The distributor box is equipped with an earthing terminal block and a neutral conductor terminal block, ensuring secure connection of PE and N conductors. The maximum dissipation power is 22.50 W at a temperature difference of 20 K.
Technology explained simply
The protection rating IP30 means that the distributor is protected against entry of solid foreign objects with a diameter of at least 2.5 mm and against splashing water. This makes it suitable for use in indoor environments where no high mechanical or weather-related stresses occur. Protection class II indicates that the distributor does not require a protective earth connection, as it is protected by double or reinforced insulation. The rated current is 63 A, indicating the maximum current load of the distributor. The installation width of 314 mm and installation height of 615 mm are aligned with standard dimensions for flush installations.
Compatibility and accessories
The distributor is equipped with a DIN rail, enabling the mounting of switches, fuses, and other components. Compatible accessories include, for example, N terminals (e.g. KN14N, KN22N, KN18N, KN06N), PE terminals (e.g. KN18E, KN06E, KN10E), phase rail (e.g. KDN363F, KDN363A), cable bridges (e.g. K67E), labeling foils (e.g. VZ602, VZ717), as well as circuit breakers (e.g. MBS116, MBS316) and residual current circuit breakers (e.g. CDS440D). These components can be used to customize the distributor to adapt the electrical installation to specific requirements.
Installation and mounting
Installation is carried out into the wall (flush), with the mounting brackets made of galvanized sheet steel ensuring secure anchoring. The rotatable frame allows adjustment to different plaster thicknesses. The DIN rail is already integrated into the device carrier, enabling direct mounting of switches and fuses. The door is closed using a snap closure, allowing quick access to the internal components. The sealability enables secure sealing of the distributor to prevent unauthorized access.
Advantages in operation
The distributor offers clear structuring of the electrical installation through its three-row layout and clear separation of PE and N conductors. The integrated DIN rail and designated terminal blocks simplify installation and maintenance. The use of plastic as a material ensures high corrosion resistance and low weight. The protection rating IP30 and protection class II ensure safe and reliable operation indoors. The installation dimensions conform to common standards, enabling easy integration into existing installations. The sealability provides additional security for public or commercial installations.
| General | |
| Mounting method | Flush mounted (plaster) |
| Number of rows | 3 |
| Width in number of modular spacings | 12 |
| Type of cover | Door |
| Cover model | With notch |
| Material housing | Plastic |
| Height | 630.5 mm |
| Width | 348 mm |
| Depth | 630.50 mm |
| Built-in depth | 89 mm |
| Internal depth | 91.5 mm |
| Colour | White |
| RAL-number | 9010 |
| Degree of protection (IP) | IP30 |
| Type of closure | Other |
| Built-in height | 615 mm |
| Built-in width | 314 mm |
| Type of door | Single |
| Transparent cover/door | |
| DIN-rail | |
| With mounting plate | |
| Extension possible | |
| With lock | |
| Sealable | |
Questions & answers
What is the delivery time of Hager VU36NC UP distributor Volta IP30 3x12PLE DIN43870?
The article Hager VU36NC UP distributor Volta IP30 3x12PLE DIN43870 is currently in stock
According to our experience the article is ready for dispatch within 3 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Hager VU36NC to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Hager VU36NC UP distributor Volta IP30 3x12PLE DIN43870 always at the best possible price. We can give you a discount of 2% on Hager VU36NC UP distributor Volta IP30 3x12PLE DIN43870 if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Hager VU36NC UP distributor Volta IP30 3x12PLE DIN43870 we can offer you a price of 167,69 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for Hager VU36NC UP distributor Volta IP30 3x12PLE DIN43870
|
Hager KN99E QC 10x bridges for PE terminal
The article KN99E from Hager is a set of plug bridges for PE terminals in the QuickConnect system. These components are designed for the safe and quick connection of grounding terminals in electrical ...Lieske Part No.: 107547 Mfg Part No: KN99E |
34,96 EUR
![]() ≈ £29.26 | ≈ $38.42
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Hager CDS440D residual current circuit breaker 4-pole 6kA 40A 30mA Type A QC
The Hager residual current circuit breaker type CDS440D is a 4-pole residual current circuit breaker (RCCB) for use in electrical installations. It provides protection against dangerous earth fault ...Lieske Part No.: 108447 Mfg Part No: CDS440D |
132,34 EUR
![]() ≈ £110.77 | ≈ $145.44
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager K67E cable bridge NYAF 6 mm² 250 mm long
The K67E cable bridge from Hager is a single component for electrical installation, specifically designed for safe and durable connection of cables in modular mounting. The device serves as an ...Lieske Part No.: 113135 Mfg Part No: K67E |
1,41 EUR
![]() ≈ £1.18 | ≈ $1.55
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KN18N QC N-terminal 18 terminal positions
The Hager KN18N is an N terminal block in the QuickConnect system, specifically designed for use in meter enclosures and distributors. It features 18 terminal points and enables quick and secure ...Lieske Part No.: 195204 Mfg Part No: KN18N |
8,84 EUR
![]() ≈ £7.40 | ≈ $9.72
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager VZ302N closure Volta Standard
The VZ302N from Hager is a locking mechanism for the volta standard system, specifically designed for installation in door handles of small distribution boxes. It provides secure locking of electrical ...Lieske Part No.: 217991 Mfg Part No: VZ302N |
39,52 EUR
![]() ≈ £33.08 | ≈ $43.43
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager ADS916D Fi-LS 1P+N 6kA B-16A 30mA Type A QC
The residual current circuit breaker ADS916D from Hager is a 1P+N switch with B characteristic and a rated current of 16 A. It is designed for use in residential and commercial buildings, where ...Lieske Part No.: 232235 Mfg Part No: ADS916D |
126,06 EUR
![]() ≈ £105.51 | ≈ $138.54
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager CDS225D residual current circuit breaker 2-pole 6kA 25A 30mA Type A QC
The Hager residual current circuit breaker type CDS225D is a 2-pole circuit breaker for use in electrical installations. It is designed for a rated voltage of 230 V and a rated current of 25 A, ...Lieske Part No.: 260085 Mfg Part No: CDS225D |
100,41 EUR
![]() ≈ £84.04 | ≈ $110.35
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KN26N QC N-terminal 26 terminal positions
The article KN26N from Hager is an N terminal block in the QuickConnect system, specifically designed for use in meter enclosures and distributors. It features 26 connection points and enables secure ...Lieske Part No.: 288875 Mfg Part No: KN26N |
15,48 EUR
![]() ≈ £12.96 | ≈ $17.01
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager EPN510 remote switch 1NO 230 VAC 16 A
The Hager EPN510 is a remote switch of the category impulse switch, designed for mounting on a DIN rail. It features a closers and is designed for a control voltage of 230 V AC as well as 110 V DC.Lieske Part No.: 289227 Mfg Part No: EPN510 |
44,65 EUR
![]() ≈ £37.37 | ≈ $49.07
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Hager KN06N QC N-terminal 6 terminal positions
The Hager QuickConnect N KN06N terminal is an N-terminal for use in electrical distribution systems. It provides six terminal points with spring-cage connection and is rated for a nominal voltage of ...Lieske Part No.: 323802 Mfg Part No: KN06N |
5,89 EUR
![]() ≈ £4.93 | ≈ $6.47
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KN14N QC N-terminal 14 terminal positions
The Hager KN14N is an N terminal block with 14 connection points, specifically designed for quick and tool-free wiring in electrical installations and automation technology. As a push-in terminal, it ...Lieske Part No.: 327113 Mfg Part No: KN14N |
7,60 EUR
![]() ≈ £6.36 | ≈ $8.35
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager FZ12MMO Patch panel 12-port blank
The Hager Patch-Panel FZ12MMO is a universal, 12-way connection module for structured cabling systems in IT networks. It serves as an empty, modular base plate for mounting on a DIN rail or by screw ...Lieske Part No.: 328233 Mfg Part No: FZ12MMO |
64,50 EUR
![]() ≈ £53.99 | ≈ $70.89
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager MBS316 circuit breaker 3P 6kA B-16A 3M QC
The Hager circuit breaker MBS316 is a 3-pole switch with B characteristic and a rated current of 16 A, specifically designed for protection in three-phase electrical distribution networks. It provides ...Lieske Part No.: 350861 Mfg Part No: MBS316 |
79,13 EUR
![]() ≈ £66.23 | ≈ $86.96
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KN18E QC PE terminal 18 terminal positions
The Hager KN18E is a PE terminal in the QuickConnect system, specifically designed for use in distribution boards and meter enclosures. With 18 terminal points, it offers a compact and efficient ...Lieske Part No.: 374907 Mfg Part No: KN18E |
8,84 EUR
![]() ≈ £7.40 | ≈ $9.72
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager SNS016 socket outlet 16 A 250 V 2.5 PLE QC
The Hager socket outlet SNS016 is a modular mounting device for use in distribution boards and control panels. With a rated voltage of 250 V and a rated current of 16 A, it is designed for power ...Lieske Part No.: 380143 Mfg Part No: SNS016 |
37,90 EUR
![]() ≈ £31.72 | ≈ $41.65
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KN14E QC PE terminal 14 terminal positions
The Hager KN14E is a PE terminal block in the QuickConnect system, specifically designed for safe and efficient connection of protective conductors in electrical installations. With 14 connection ...Lieske Part No.: 391301 Mfg Part No: KN14E |
7,60 EUR
![]() ≈ £6.36 | ≈ $8.35
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KN06E QC PE terminal 6 terminal positions
The Hager KN06E is a PE terminal block in the QuickConnect system, specifically designed for use in distributors and meter enclosures. It enables secure and rapid connection of protective conductors ...Lieske Part No.: 431061 Mfg Part No: KN06E |
5,89 EUR
![]() ≈ £4.93 | ≈ $6.47
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KN10E QC PE terminal 10 terminal positions
The article KN10E from Hager is a PE terminal in the QuickConnect system, specifically designed for use in distributors and meter enclosures. This terminal enables secure and quick connection of ...Lieske Part No.: 432627 Mfg Part No: KN10E |
6,65 EUR
![]() ≈ £5.57 | ≈ $7.31
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KN22E QC PE terminal 22 terminal positions
The Hager KN22E is a PE terminal with QuickConnect technology, specifically developed for use in distribution enclosures and meter enclosures. With 22 terminal points, it provides an efficient and ...Lieske Part No.: 522094 Mfg Part No: KN22E |
12,73 EUR
![]() ≈ £10.66 | ≈ $13.99
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KDN363A phase busbar 3P fork 10 mm² 63 A 12M
The Hager phase bar KDN363A is a 3-pole, modular distribution component for installation in switchgear and distribution boxes. It serves structured energy distribution and enables safe and efficient ...Lieske Part No.: 527757 Mfg Part No: KDN363A |
15,48 EUR
![]() ≈ £12.96 | ≈ $17.01
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager MBS116 circuit breaker 1P 6kA B-16A 1M QC
The Hager circuit breaker MBS116 is a 1-pole LS switch with B tripping characteristic and a rated current of 16 A. It is designed for use in distribution boards and provides protection against ...Lieske Part No.: 555444 Mfg Part No: MBS116 |
11,88 EUR
![]() ≈ £9.94 | ≈ $13.06
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KZN023 end caps for phase busbar 2-pole and 3-pole
The KZN023 end cap from Hager is a shock protection cover end piece for phase bars, specifically designed for 2- and 3-pole systems. It serves as a protective cap for open ends of phase bars and ...Lieske Part No.: 580843 Mfg Part No: KZN023 |
10,07 EUR
![]() ≈ £8.43 | ≈ $11.07
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Hager KN10N QC N-terminal 10 terminal positions
Fast Modular plug-in terminalsSSK - modular system N-Terminal Blocks Division units: 1.5 Width: 45 Type: KN10N Quantity: 1 unit. Lieske Part No.: 682507 Mfg Part No: KN10N |
6,65 EUR
![]() ≈ £5.57 | ≈ $7.31
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KDN363F phase busbar 3P+N fork 10 mm² 63 A 12 M
Compact busbarsFor lightning current and surge arresters Compact busbars Version: for 1 GFCI, 4-pin + 8 MCBs 1 pole Cross-section: 10 mm ² Type: KDN363F Quantity: 1 unit. Lieske Part No.: 699156 Mfg Part No: KDN363F |
16,25 EUR
![]() ≈ £13.60 | ≈ $17.86
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager FZ12MM Patch Panel 12-way with 6x RJ45 modules
Patch panel, universal 12-way (E-Dat) including 6xRJ45 modules, for DIN rail/screwed. Patch panel with 12 slots for installation in multimedia fields on DIN rails, support rails and mounting plates.Lieske Part No.: 714421 Mfg Part No: FZ12MM |
166,82 EUR
![]() ≈ £139.63 | ≈ $183.34
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Hager VZ463 PE/N terminal block Volta 3-row
Carrier with PE / N terminals Type: Plug-in terminals ,5-4 mm ² N + 9 x 7 x PE terminal connection from 0.5 to 25 mm ² 5 x 5 N + PE Type: VZ463 item: ST. Lieske Part No.: 719792 Mfg Part No: VZ463 |
38,66 EUR
![]() ≈ £32.36 | ≈ $42.49
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Hager KN00A QC adapter empty
Quick plug-in terminals Modular SSK - Modular system Universal Adapter Universal Adapter allows mounting of the SSK on the mounting rail in horizontal and vertical position of the other on the ...Lieske Part No.: 729729 Mfg Part No: KN00A |
4,75 EUR
![]() ≈ £3.98 | ≈ $5.22
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager VZ103N trim frame Volta with door 3-row RAL9010
Frame, Volta, 3-row, with door, RAL 9010Lieske Part No.: 756417 Mfg Part No: VZ103N |
74,67 EUR
![]() ≈ £62.50 | ≈ $82.06
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Hager KZ059 shock protection cover
The Hager KZ059 touch protection cover is an accessory for busbars, serving as an end cap and specifically designed to prevent direct contact with conductive parts in distribution boxes and enclosures.Lieske Part No.: 771390 Mfg Part No: KZ059 |
1,89 EUR
![]() ≈ £1.58 | ≈ $2.08
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KDN463A phase bar 4P fork 10 mm² 63 A 12M
Phase rail 4-pole with fork connection 10mm² 63A 12 modules. Phase rail for suitable modular devices.Lieske Part No.: 793140 Mfg Part No: KDN463A |
29,92 EUR
![]() ≈ £25.04 | ≈ $32.88
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|


































