Hager MBS116 circuit breaker 1P 6kA B-16A 1M QC
|
11,88 EUR |
|||||||||||
|
( 14,14 EUR incl. VAT ) ≈ £9.94 | ≈ $13.06 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline | |||||||||||
| In Stock: >1000 pieces | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 555444 | ||||||||||
| Mfg Part No: | MBS116 | ||||||||||
| UPC/EAN: | 3250614314735 | ||||||||||
| Weight: | 0.0805 kg | ||||||||||
| Type: | MBS116 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Hager MBS116:
Applications
The MBS116 is intended for use in electrical distributions indoors, particularly in residential buildings, office buildings, and other facilities where reliable protection against overload and short circuit is required. The B tripping characteristic makes it especially suitable for installations with normal load characteristics, such as lighting, heating, and general consumers. The energy limitation class 3 ensures rapid disconnection in the event of a short circuit, minimizing thermal and mechanical stress on the installation.
Functions and Equipment in Detail
The switch features a QuickConnect connection at the output, enabling quick and secure connection with flexible conductors in cross-sections from 1.5 to 4.0 mm². The input and output terminals are designed for rigid conductors up to 35 mm² and flexible conductors up to 25 mm². The upper terminal is a 360° screw connection, while the lower terminal is of the biconnect type, allowing flexible mounting in modular distributors. The pollution degree class 2 corresponds to an environment with low pollution, as found in normal indoor spaces. The power loss is 2.44 W under rated operation.
Technology Explained Simply
The B tripping characteristic means that the switch disconnects within seconds when the current reaches approximately 3 to 5 times the rated current (i.e., 48 to 80 A). For lower overloads (e.g., 1.13 times), it disconnects after a time delay to tolerate short-term current surges. The breaking capacity of 6 kA is sufficient for most domestic and commercial applications. The rated insulation voltage of 500 V and the impulse voltage withstand of 4 kV ensure safe insulation even under transient voltage surges. The overvoltage category 3 refers to the position in the network and is typical for installations in distribution networks.
Compatibility and Accessories
The MBS116 can be combined with various accessories to integrate additional functions. These include auxiliary contacts (MZ201) and signal contacts (MZ202) for remote monitoring, as well as phase bar systems (e.g., KDN363A, KDN363B, KDN363F) for mounting in modular distributors. Cable bridges (K67C, K67H) enable connection of multiple switches, and end caps (KZN023) protect the phase bar. The locking device MZN175 can be used to secure the switch against unauthorized access. Mounting is done in a 1-module configuration, enabling compact placement in distributors.
Mounting and Installation
Mounting is carried out in flush-mounted distributors using the integrated connection terminals. The upper terminal is a 360° screw connection, and the lower terminal is of the biconnect type, allowing flexible and secure fastening. The rated torque is 2.80 Nm for both terminals. The clearance to the network is 35 mm, ensuring compliance with safety distances. The mounting is designed for modular distributions, with the switch installed in a 1-module size (17.5 mm width).
Advantages in Operation
The MBS116 provides reliable protection with rapid disconnection in the event of a short circuit and controlled response to overload. The QuickConnect technology at the output simplifies installation and maintenance. VDE certification and compliance with EN 60898 and IEC 60947-2 ensure adherence to European safety standards. The energy limitation class 3 minimizes thermal stress on the installation in the event of a fault. The combinability with accessories extends functionality for special applications, such as remote monitoring or protection against unauthorized access.
| General | |
| Release characteristic | B |
| Number of poles (total) | 1 |
| Number of protected poles | 1 |
| Rated current | 16 A |
| Rated voltage | 400 |
| Rated insulation voltage Ui | 500 V |
| Rated impulse withstand voltage Uimp | 4 kV |
| Rated short-circuit breaking capacity Icn EN 60898 at 230 V | 6 kA |
| Rated short-circuit breaking capacity Icu IEC 60947-2 at 230 V | 6 kA |
| Voltage type | AC |
| Frequency | 60 |
| Current limiting class | 3 |
| Over voltage category | 3 |
| Pollution degree | 2 |
| Width in number of modular spacings | 1 |
| Built-in depth | 70 mm |
| Degree of protection (IP) | IP20 |
| Ambient temperature during operating | 70 |
| Connectable conductor cross section multi-wired | 25 |
| Connectable conductor cross section solid-core | 35 |
| Power loss | 2.44 W |
| Concurrently switching N-neutral | |
| Additional equipment possible | |
| Explosion-proof | |
| Flush-mounted installation | |
Questions & answers
What is the delivery time of Hager MBS116 circuit breaker 1P 6kA B-16A 1M QC?
The article Hager MBS116 circuit breaker 1P 6kA B-16A 1M QC is currently in stock
According to our experience the article is ready for dispatch within 3 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Hager MBS116 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Hager MBS116 circuit breaker 1P 6kA B-16A 1M QC always at the best possible price. We can give you a discount of 2% on Hager MBS116 circuit breaker 1P 6kA B-16A 1M QC if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 15 pieces of Hager MBS116 circuit breaker 1P 6kA B-16A 1M QC we can offer you a price of 10,19 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
|
Hager VU36NC UP distributor Volta IP30 3x12PLE DIN43870
The Hager small distributor VU36NC is a flush-mounted distributor of the Volta series, designed for installation in residential and commercial areas. It features a capacity of 36 mounting positions ...Lieske Part No.: 462385 Mfg Part No: VU36NC |
192,19 EUR
![]() ≈ £160.86 | ≈ $211.22
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager VU24NC UP distributor Volta IP30 2x12PLE DIN43870
Flush junction, series Volta small distribution according to DIN VDE 0603, IP30th Fits devices up to 70 mm depth, consisting from: Wall box made ​​of plastic with ... Lieske Part No.: 644672 Mfg Part No: VU24NC |
163,88 EUR
![]() ≈ £137.17 | ≈ $180.10
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
Fitting accessory for Hager MBS116 circuit breaker 1P 6kA B-16A 1M QC
|
Hager LZ060 spacing piece for heat dissipation
The LZ060 spacing piece from Hager is a specially developed component for heat dissipation in installation switchboxes and modular devices. It serves as a thermal spacer between electrical components ...Lieske Part No.: 178169 Mfg Part No: LZ060 |
3,37 EUR
![]() ≈ £2.82 | ≈ $3.70
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager K67H cable bridge NYAF 6 mm² 110 mm long
The K67H cable bridge from Hager is a single-pole connection element for use in electrical installations, specifically designed for connecting conductors with a nominal cross-section of 6 mm². The ...Lieske Part No.: 419408 Mfg Part No: K67H |
1,30 EUR
![]() ≈ £1.09 | ≈ $1.43
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Hager K67C cable bridge NYAF 10 mm² 110 mm long
The K67C cable bridge from Hager is an electrical connection component for use in distributors and meter enclosures. It provides a safe and reliable connection for conductors with a nominal ...Lieske Part No.: 440816 Mfg Part No: K67C |
5,70 EUR
![]() ≈ £4.77 | ≈ $6.26
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Hager MZ202 signal contact 1NO+1NC 6A 240V
Signal contact for MCB RCBO 125A 1 NO and 1 NC 6A 240VLieske Part No.: 502785 Mfg Part No: MZ202 |
46,55 EUR
![]() ≈ £38.96 | ≈ $51.16
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Hager KDN363A phase busbar 3P fork 10 mm² 63 A 12M
The Hager phase bar KDN363A is a 3-pole, modular distribution component for installation in switchgear and distribution boxes. It serves structured energy distribution and enables safe and efficient ...Lieske Part No.: 527757 Mfg Part No: KDN363A |
15,48 EUR
![]() ≈ £12.96 | ≈ $17.01
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager MZ201 auxiliary contact 1NO+1NC 6A 240V for MCB, RCBO, RCCB
The auxiliary contact block MZ201 from Hager is a snap-on module for miniature circuit breakers (MCB) and residual current circuit breakers with overcurrent protection (RCBO) with a rated current up ...Lieske Part No.: 547425 Mfg Part No: MZ201 |
31,92 EUR
![]() ≈ £26.72 | ≈ $35.08
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager MZN175 locking device for LS, FI, FI-LS 1
The MZN175 locking device from Hager is a mechanical accessory for use with circuit breakers, RCDs, and RCD-circuit breakers. It serves to securely lock the switches in the installation, preventing ...Lieske Part No.: 565350 Mfg Part No: MZN175 |
8,46 EUR
![]() ≈ £7.08 | ≈ $9.30
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Doepke 09920300 GM.3.57.100/10 phase bar fork terminal 1000 mm cut-to-length
These components for wiring circuit breakers in industrial, commercial and private electrical distribution boards significantly reduce the installation effort. These cut-to-length busbars are suitable ...Lieske Part No.: 568391 Mfg Part No: 09920300 Type: GM.3.57.100/10 |
46,09 EUR
![]() ≈ £38.58 | ≈ $50.65
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Hager KZN023 end caps for phase busbar 2-pole and 3-pole
The KZN023 end cap from Hager is a shock protection cover end piece for phase bars, specifically designed for 2- and 3-pole systems. It serves as a protective cap for open ends of phase bars and ...Lieske Part No.: 580843 Mfg Part No: KZN023 |
10,07 EUR
![]() ≈ £8.43 | ≈ $11.07
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Hager KDN363F phase busbar 3P+N fork 10 mm² 63 A 12 M
Compact busbarsFor lightning current and surge arresters Compact busbars Version: for 1 GFCI, 4-pin + 8 MCBs 1 pole Cross-section: 10 mm ² Type: KDN363F Quantity: 1 unit. Lieske Part No.: 699156 Mfg Part No: KDN363F |
16,25 EUR
![]() ≈ £13.60 | ≈ $17.86
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KDN363B phase busbar 3P fork 10 mm² 63 A 57M
Compact busbars through the installation-friendly quick-connect terminal and bi-connect terminal is the terminal phase of the rail and the inflow and outflow performance problems. 3-pole miniature ...Lieske Part No.: 829362 Mfg Part No: KDN363B |
67,36 EUR
![]() ≈ £56.38 | ≈ $74.03
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager U841 sealing cap for dome cap
Transparent cover 53 x 53 mm Sealable, for the installation of fuses D, DII or main switch type: U84 ST. Lieske Part No.: 829644 Mfg Part No: U841 |
13,01 EUR
![]() ≈ £10.89 | ≈ $14.30
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|



















