Further information for Hager VU36NC Distribution Board 3x12PLE IP30
General
Mounting method
Flush mounted (plaster)
Number of rows
3
Width in number of modular spacings
12
Type of cover
Door
Cover model
With notch
Material housing
Plastic
Height
630.5 mm
Width
348 mm
Depth
630.50 mm
Built-in depth
89 mm
Internal depth
91.5 mm
Colour
White
RAL-number
9010
Degree of protection (IP)
IP30
Type of closure
Other
Built-in height
615 mm
Built-in width
314 mm
Type of door
Single
Transparent cover/door
DIN-rail
With mounting plate
Extension possible
With lock
Sealable
The Hager small distributor VU36NC is a flush-mounted distributor of the Volta series, designed for installation in residential and commercial areas. It features a capacity of 36 mounting positions (PLE), distributed across three rows with 12 PLE each, and is designed for flush mounting. The housing is made of plastic and is finished in white (RAL 9010). The protection rating IP30 ensures protection against solid foreign objects and splashing water, making the distributor suitable for indoor use. The door is a single door with a snap closure and without an integrated lock. The cover features a cutout that facilitates installation and maintenance.
Applications
The distributor is intended for electrical installations in residential buildings and commercial rooms where a clear and secure distribution of electrical lines is required. It complies with standards DIN VDE 60670-24 and DIN 43871 and is approved for residential buildings according to DIN 18015. The installation dimensions are 615 mm in height and 314 mm in width, with an installation depth of 89 mm. The overall dimensions of the housing are 630.5 mm (height), 348 mm (width), and 94.5 mm (depth), with an internal depth of 91.5 mm.
Functions and equipment in detail
The distributor is equipped with a cable entry slider that enables secure and tight cable entry. A standard cable strain relief ensures proper cable routing. Installation is carried out using mounting brackets made of galvanized sheet steel, ensuring stable anchoring in masonry. The device carrier made of sheet steel allows mounting of individual, isolated DIN rails. The distributor box is equipped with an earthing terminal block and a neutral conductor terminal block, ensuring secure connection of PE and N conductors. The maximum dissipation power is 22.50 W at a temperature difference of 20 K.
Technology explained simply
The protection rating IP30 means that the distributor is protected against entry of solid foreign objects with a diameter of at least 2.5 mm and against splashing water. This makes it suitable for use in indoor environments where no high mechanical or weather-related stresses occur. Protection class II indicates that the distributor does not require a protective earth connection, as it is protected by double or reinforced insulation. The rated current is 63 A, indicating the maximum current load of the distributor. The installation width of 314 mm and installation height of 615 mm are aligned with standard dimensions for flush installations.
Compatibility and accessories
The distributor is equipped with a DIN rail, enabling the mounting of switches, fuses, and other components. Compatible accessories include, for example, N terminals (e.g. KN14N, KN22N, KN18N, KN06N), PE terminals (e.g. KN18E, KN06E, KN10E), phase rail (e.g. KDN363F, KDN363A), cable bridges (e.g. K67E), labeling foils (e.g. VZ602, VZ717), as well as circuit breakers (e.g. MBS116, MBS316) and residual current circuit breakers (e.g. CDS440D). These components can be used to customize the distributor to adapt the electrical installation to specific requirements.
Installation and mounting
Installation is carried out into the wall (flush), with the mounting brackets made of galvanized sheet steel ensuring secure anchoring. The rotatable frame allows adjustment to different plaster thicknesses. The DIN rail is already integrated into the device carrier, enabling direct mounting of switches and fuses. The door is closed using a snap closure, allowing quick access to the internal components. The sealability enables secure sealing of the distributor to prevent unauthorized access.
Advantages in operation
The distributor offers clear structuring of the electrical installation through its three-row layout and clear separation of PE and N conductors. The integrated DIN rail and designated terminal blocks simplify installation and maintenance. The use of plastic as a material ensures high corrosion resistance and low weight. The protection rating IP30 and protection class II ensure safe and reliable operation indoors. The installation dimensions conform to common standards, enabling easy integration into existing installations. The sealability provides additional security for public or commercial installations.