Grandstream POE_INJECTOR PoE+ injector 48 V / 0.5 A content_copy

The Grandstream PoE Injector is a network device for powering end devices via Ethernet cable, specifically developed for use in IP telephony and network applications. It enables the supply of compatible devices with power and data through a single network cable, simplifying installation and reducing the number of required cables. The device is designed for use in office environments and for integrating IP phones into existing networks.

PoE Technology

The injector uses PoE technology (Power over Ethernet) to transmit power through the Ethernet cable. This is particularly advantageous when end devices such as IP phones are installed in locations where no direct power supply is available. The PoE function allows flexible placement of devices without the need to lay additional power lines. Power is supplied via the network cable connection, making installation faster and more cost-efficient.

Applications

The Grandstream PoE Injector is primarily designed for use with IP phones, especially models such as the SIP GXP-2160, GXP2170, GXP-2130 v2, GXP2135, and GXP2140. These devices are designed for use in corporate networks and benefit from PoE support, as they receive both data and power over the network. Using the injector is particularly useful when IP phones cannot be directly connected to a PoE-capable switch.

Functions and Features in Detail

The injector features two Ethernet ports: one for connecting to the network (uplink) and one for connecting to the end device (downlink). Power is supplied via the downlink port, with voltage and power matching the requirements of the connected IP phones. Devices powered by the injector are typically equipped with a passive PoE standard, meaning they do not require special PoE negotiation (such as IEEE 802.3af/at) and can be powered directly through the cable.

Technology Explained Simply

The injector operates as a passive PoE solution, meaning it does not support intelligent PoE protocols such as IEEE 802.3af or 802.3at. Instead, it delivers a constant power supply over the Ethernet cable, sufficient for the connected devices. This type of power supply is simple and cost-effective, but not compatible with active PoE. Power is delivered through the conductor pairs of the Ethernet cable, with voltage and power selected to meet the requirements of the supported IP phones.

Compatibility and Accessories

The injector is specifically developed for use with the mentioned Grandstream IP phones. Compatibility is ensured by the passive PoE technology, which is standard on these models. Devices can be directly connected to the downlink port of the injector, while the network is connected via the uplink port. It is important that the connected device meets the passive PoE requirements to ensure safe and stable power supply.

Mounting and Installation

Installation of the injector involves connecting the uplink port to a network switch or router and the downlink port to the IP phone. No additional tools or configurations are required. Power is supplied via the network cable, eliminating the need for additional power cables. The injector can be positioned flexibly, as long as network connectivity and power supply to the connected devices are ensured.

Advantages in Operation

Using the Grandstream PoE Injector reduces the number of required cables and simplifies the installation of IP phones. Power is supplied via the existing network, reducing dependence on power outlets. This is particularly beneficial when installing in rooms where no direct power supply is available. The passive PoE technology ensures simple and reliable power supply, sufficient for the specified IP phone models.