Eltako 23100704 NLZ12NP-230V+UC delay switch 1S non-potential-free 16A
|
60,02 EUR 62,55 EUR |
|||||||||||
|
( 71,42 EUR incl. VAT ) ≈ £50.24 | ≈ $65.96 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline | |||||||||||
| In Stock: >10 pieces | |||||||||||
| Lieske Part No.: | 761228 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 23100704 | ||||||||||
| UPC/EAN: | 4010312602911 | ||||||||||
| Weight: | 0.123 kg | ||||||||||
| Type: | NLZ12NP-230V+UC | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Eltako 23100704:
Applications
The delayed-off switch is typically used in residential and commercial buildings where automatic shutdown of ventilation systems or lighting after a preset time is required. It is particularly suitable for applications where the load should not be switched off immediately upon opening the control contact, but instead requires a defined delayed-off time, for example, to allow a fan to slow down gradually. This function enables a gentle shutdown, increasing the device's lifespan and avoiding unpleasant noises.
Functions and Equipment in Detail
The device features three adjustable rotary switches. The top rotary switch is used to set the delayed-off time, which can be selected between 1 and 12 minutes. The middle rotary switch controls the response delay, adjustable from 0 to 12 minutes. This allows defining a delay when switching on the load, for example, to prevent unintended immediate activation. The bottom rotary switch enables selection between continuous-on and continuous-off operation, allowing the device to be used for constant operating states as well. Control is performed via a control contact, which can be activated, for example, by a light switch or dimmer.
Technology Explained Simply
The NLZ12NP-230V+UC is based on hybrid technology, combining the advantages of wear-free electronic control with the high switching capacity of a special relay. The contact switching occurs at the zero-crossing point, protecting the contacts and the connected load, as the current is minimal at the moment of switching. The supply and switching voltage is 230 V, with an additional galvanically isolated universal control voltage of 8 to 230 V UC available. This enables control by various sources, even at low voltages. The device consumes only 0.5 W in standby mode, ensuring low energy consumption. The switching noise is very low, ensuring quiet operation.
Compatibility and Accessories
The delayed-off switch can be controlled by all dimmers of types EUD12 and EUD61, even when operated at the lowest dimming setting. This expands the application possibilities in modern lighting systems, where dimmers are frequently used as control sources. The galvanic isolation of the control voltage enables safe and interference-free control, even in complex installations.
Mounting and Installation
The device is mounted on a DIN-EN 60715 TH35 support rail, enabling standardized installation in electrical systems. The dimensions correspond to a module width of 18 mm and depth of 58 mm. Mounting is done by simply snapping the device into the rail, while electrical connections must be made according to the requirements of the electrical installation. The terminal clamps are designed for use with cables complying with electrical standards.
Advantages in Operation
The combination of hybrid technology and zero-crossing switching ensures high reliability and long service life of the device. The adjustable delay times allow flexible adaptation to different requirements. The low standby power consumption and quiet switching behavior contribute to energy-efficient and disturbance-free operation. Compatibility with dimmers from the EUD series expands application possibilities in modern, intelligent lighting systems.
| General | |
| Switching power | 16 A |
| Switching voltage | 250 V AC |
| Supply voltage | 230 V |
| Control voltage | 230 V |
| Universal control voltage | 8-230 V |
| Stand-by loss | 0,5 W |
| Response time | 1-12 minutes |
| Response delay | 0-12 minutes |
| Switch type | non-isolated - |
| Mounting method | DIN-EN 60715 TH35 - |
| Technology | Hybrid technology - |
| Control voltage, galvanically isolated | 8-230 V |
| Switching noise | very low - |
Questions & answers
What is the delivery time of Eltako 23100704 NLZ12NP-230V+UC delay switch 1S non-potential-free 16A ?
The article Eltako 23100704 NLZ12NP-230V+UC delay switch 1S non-potential-free 16A is currently in stock
According to our experience the article is ready for dispatch within 3 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Eltako 23100704 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Eltako 23100704 NLZ12NP-230V+UC delay switch 1S non-potential-free 16A always at the best possible price. We can give you a discount of 2% on Eltako 23100704 NLZ12NP-230V+UC delay switch 1S non-potential-free 16A if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 6 pieces of Eltako 23100704 NLZ12NP-230V+UC delay switch 1S non-potential-free 16A we can offer you a price of 56,87 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.



