Eltako 23100704, EAN: 4010312602911

Eltako 23100704 Timer Switch 1S non-potential 16A

Installation > Modular devices / equipment installation > Staircase time switch / time relay

Eltako 23100704 Timer Switch 1S non-potential 16A

Lieske Part No. 761228
Mfg Part No 23100704
EAN-Code 4010312602911
Manufacturer Eltako
Here only 60,02 EUR
71,42 EUR incl. VAT

Further information for Eltako 23100704 Timer Switch 1S non-potential 16A

General
Switching power16 A
Switching voltage250 V AC
Supply voltage230 V
Control voltage230 V
Universal control voltage8-230 V
Stand-by loss0,5 W
Response time1-12 minutes
Response delay0-12 minutes
Switch typenon-isolated -
Mounting methodDIN-EN 60715 TH35 -
TechnologyHybrid technology -
Control voltage, galvanically isolated8-230 V
Switching noisevery low -
The Eltako NLZ12NP-230V+UC is a modular device for controlling fans or other loads with a delayed-off function. It serves as a delayed-off switch in electrical installations, particularly in stairwell or corridor lighting systems, where automatic shutdown after a specific time is desired. The device is designed for mounting on a DIN-EN 60715 TH35 support rail and occupies a module width of 18 mm and depth of 58 mm. It features a non-potential-free close contact with a rated capacity of 16 A at 250 V AC, suitable for switching loads.

Applications

The delayed-off switch is typically used in residential and commercial buildings where automatic shutdown of ventilation systems or lighting after a preset time is required. It is particularly suitable for applications where the load should not be switched off immediately upon opening the control contact, but instead requires a defined delayed-off time, for example, to allow a fan to slow down gradually. This function enables a gentle shutdown, increasing the device's lifespan and avoiding unpleasant noises.

Functions and Equipment in Detail

The device features three adjustable rotary switches. The top rotary switch is used to set the delayed-off time, which can be selected between 1 and 12 minutes. The middle rotary switch controls the response delay, adjustable from 0 to 12 minutes. This allows defining a delay when switching on the load, for example, to prevent unintended immediate activation. The bottom rotary switch enables selection between continuous-on and continuous-off operation, allowing the device to be used for constant operating states as well. Control is performed via a control contact, which can be activated, for example, by a light switch or dimmer.

Technology Explained Simply

The NLZ12NP-230V+UC is based on hybrid technology, combining the advantages of wear-free electronic control with the high switching capacity of a special relay. The contact switching occurs at the zero-crossing point, protecting the contacts and the connected load, as the current is minimal at the moment of switching. The supply and switching voltage is 230 V, with an additional galvanically isolated universal control voltage of 8 to 230 V UC available. This enables control by various sources, even at low voltages. The device consumes only 0.5 W in standby mode, ensuring low energy consumption. The switching noise is very low, ensuring quiet operation.

Compatibility and Accessories

The delayed-off switch can be controlled by all dimmers of types EUD12 and EUD61, even when operated at the lowest dimming setting. This expands the application possibilities in modern lighting systems, where dimmers are frequently used as control sources. The galvanic isolation of the control voltage enables safe and interference-free control, even in complex installations.

Mounting and Installation

The device is mounted on a DIN-EN 60715 TH35 support rail, enabling standardized installation in electrical systems. The dimensions correspond to a module width of 18 mm and depth of 58 mm. Mounting is done by simply snapping the device into the rail, while electrical connections must be made according to the requirements of the electrical installation. The terminal clamps are designed for use with cables complying with electrical standards.

Advantages in Operation

The combination of hybrid technology and zero-crossing switching ensures high reliability and long service life of the device. The adjustable delay times allow flexible adaptation to different requirements. The low standby power consumption and quiet switching behavior contribute to energy-efficient and disturbance-free operation. Compatibility with dimmers from the EUD series expands application possibilities in modern, intelligent lighting systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/761228
qrcode für Eltako 23100704 Timer Switch 1S non-potential 16A